Your cart is empty.
Your cart is empty. Features:
Logic sampling can go up to 24M/s per channel, in fact 10M/S is sufficient.
8 channels: You can collect signals while analyzing data. It can monitor 8 different digital signals. Sample and analyze like I2C, UART
Logic sampling can be up to 24M per second per channel.
The sampling rate can be set as follows. 24KHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;
If you need product information, please contact us.
Specifications:
Maximum sampling rate: 24Msps
Input voltage range: 0~5V
Digital channels: 8
Input low level: Input high level: > 1.4V
Supported protocols: SPI, IIC, UART, SMBus, I2S, CAN, parallel, custom, search, asynchronous, 1-Wite, PS/2
Input impedance: 1MΩ|| 10pF (typical Value, approximate value)
Crystal: ±20ppm, 24MHz
Error/Accuracy: Pulse width measurement: ±42ns (at 24MHz)
Size (L x W x H): 55 x 28 x 14 mm
Product weight: 50g
Note:
First, please make sure the computer is USB2.0 or USB3.0 high speed. Normal operation cannot be performed with low-speed USB.
The normal operating voltage of the analyzer is 5.5V or less, low level if it is 1.5V or less, and high level between 1.5 and 5.5V, and the highest voltage is 7.5V. . Please ensure the acquisition signal voltage is within 5.5V.
Please ensure the signal frequency is 0-12Mhz digital signal.
Before collecting the signal, please connect the GND of the forward logic analyzer to the connected single board GND. Otherwise, the measured data will be incorrect.
Please insert the USB into the analyzer horizontally to avoid damage.
Package Contents:
1 X 24MHz 8 Channel USB Logic Analyzer 8CH Logic Analyzer
12x test clips
1x USB cable
Layla Mah
2025-08-28 12:45:45
The provided female jumper connectors don't attach to the provided clips without disassembly and soldering! There's just nowhere to attach them. You'll need to disassemble the clips, then cut, strip and solder the wires to them and reassemble. Very disappointed!
Mustafa
2025-02-16 19:43:02
Arrived quickly and works perfect. You will need to find the software online, but once you do, the setup is straightforward and help me resolved issues with my i2c connection.
J. B.
2025-02-11 17:28:54
I spent a couple of hours searching for software for this. I never did find anything that worked very well.Kinda useless without a clue on what software I'm supposed to use with it. OR a statement that "we copied this from XYZ, please use their software"
Recommended Products
$135.99
$ 66 .99 $66.99