Your cart is empty.
Your cart is empty.Brand new Operates voltage: 2. 5 4. 0 VDC Rated voltage: 3. 0 VDC Rated rotor speed: 3500RPM Rated current: 70mA Max Starting current: 90mA Max Starting voltage: 2. 3V DC Max Insulation resistance: 10Mohm Min Direction of rotation: arbitrary direction Can be operated in either direction simply reverse power supply polarity Dimensions: 4mm x 8mm(D*H) Made for vibration alerts in cell phones and pagers Comes with a removable rubber boot with two leads
Gary
2025-09-05 15:57:29
They work fine. Now I have to find a project that uses them.
Kelly J.
2025-09-01 13:32:17
Works great for little bristle bots if you are very delicate with striping wires. They only have a tiny little bit exposed, not even enough to wrap it around something.
Melissa
2025-08-14 18:58:47
Ordered these for a Cub Scout Bristle bot project. They worked great if you could get the 1" wires to touch anything! The wires were just so short and only about 1/8" of wire was exposed which made it impossible for little hands to do much with them. We tried to strip down the wires to expose more but the 28 gauge wires just broke off. I needed 8 and had to order 2 sets to get enough working motors since the wires just weren't sturdy or long enough for my project. I am not in anyway an electrician which is why I think I had such a hard time with them. I just couldn't find the tools I needed to make these work well for me.
Will
2025-06-04 10:47:18
When I was getting ready to purchase I wondered if they spun both directions. They do in fact go both ways. Awesome motors!
Belinda
2025-05-19 17:57:18
Powerful little motors but the wires needed trimming as the connection wasn’t strong enough for our robots.
Kristina V.
2025-05-12 11:04:46
Many of the wires pulled out as we were assembling our project.
heather81us
2025-04-28 11:22:01
Product works well. Smaller than I thought but that's my fault!😀😀
Carrie L. Vahsholtz
2025-04-24 10:50:39
The wires are to short on these VERY small motors.
Omega
2025-04-09 13:29:13
Son muy pequeños, los querÃa para hacer vibrar unas piezas impresas en 3D para un juego de escape room , al final utilice otro motor un poco más grande
R
2025-03-19 14:31:24
I didn't actually end up using these in the finished project, but they were there at one stage and performed as you would expect them too, I just wanted a bigger buzz so ended up using PlayStation controller motors.
PaoloB
2025-02-28 14:03:40
The motors work fine so far. As mentioned by others, the wiring is pathetic: about 10 mm of flimsy wire, not particularly easy to solder either. It is a shame: they could charge 10p extra, add 50 mm of wiring and make everyone happy.
R. A. Harris
2025-01-07 20:09:15
VERY VERY small - as advertised and they do their job.
Recommended Products
$8.29
$ 3 .99 $3.99