Product Description

How to measure the length of the required belt:

Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

To accurately measure the length of the v-belt, use a belt measuring tool or a soft ruler, not a steel ruler.
The width and thickness of the belt should also be measured to confirm the type of belt.

Installation:

First, loosen the tensioning device, then press the v-belt into the pulley groove by hand, and finally tighten it again.

Notice:

Pay attention to the wear of the belt groove of the v-belt pulley.
Check whether the centerline of the two pulley shafts is parallel, whether the corresponding pulley slots are aligned, and whether there is any skewing phenomenon.
When one v-belt is badly worn and cannot be used, replace all the v-belts at the same time, with the same type and equal length, so that each belt has the same tension.

Maintenance:

Regularly check the v-belt tension, after adjustment still can not meet the specified requirements, must be replaced with a new v-belt.
In use, the operating temperature of the v-belt should not exceed 140°F, do not apply belt grease casually.
Various types of v-belt, should not be coated with rosin or sticky substances, but also to prevent v-belt from oil, butter and gasoline, otherwise, it will corrode the v-belt, and shorten the service life.
V-belt should be stored at a relatively low temperature, with no direct sunlight and no oil and corrosive fumes place.

Application

Lawn Care Equipment

Repair lawn equipment, snow removal machine

General Purpose

Repair band saw, box fan, drilling machine, trimmer

Automotive Repair

Replace the automotive belt



Customer Reviews	66	228	276	107	31	18
Type	B	A	M	K	O	SPZ
Width	16mm	13mm	10mm	8mm	10mm	10mm
Thickness	11mm	9mm	6mm	6mm	6mm	9mm

Fred

2025-07-09 18:12:09

perfect replacement for the drive for my milling machine.

Manolo

2025-06-22 15:30:36

Todo bien

BradK

2025-05-12 12:09:51

Ordered in May to have on hand. B-48 belt is much shorter than the B-48 I have been using for the past 15 years. Return window is closed I guess I am screwed!

Dave

2025-04-11 11:44:10

I checked all the local stores, tractor supply, lowes, and the farm and feed shops; and couldnt find the correct size. I cut one of the old ones off, measured all the dimensions and found this on Amazon. Fits perfectly

Benny Boo

2025-04-05 17:26:48

Good quality belt and good price.

Scot Stouffer

2025-03-26 13:23:45

Quick delivery for an odd sized belt not available in stores. Fits well. Quality seems good for price.

ARFWAY

2025-03-25 11:11:01

Says B-22, but is longer than all the other B-22 belts I have ever had by abut 2 inches.

Kennebunk Free Library

2025-03-14 10:12:39

These belts were 2" shorter than other B-40 V-Belts we've ordered before. Totally unusable. Will not order again.

Mark D

2025-03-05 09:11:06

Inexpensive belt...now long gone..might have got 20hrs

christian beauchamp

2025-02-02 17:32:55

pour le prix ses super

Kevin Skipper

2025-01-26 16:33:06

Good

K. Gill

2024-12-16 15:48:15

This belt is listed as B36, but way shorter than a Gates B36 belt. It's not long enough to replace the B36 belt that I needed to do.

charland d.

2024-11-15 11:55:21

Pour ramasser les feuilles sur tracteur kubota produit de Chine aprÃ¨s une heure la courroie Ã©tait fini bon pour les vidanges 20.00$

Shopping Cart

Your cart is empty.

uxcell B-40 V-Belts 40' Inner Length, B-Section Rubber Drive Belt

1.Size:25

About this item

Product Description

Application

Lawn Care Equipment

General Purpose

Automotive Repair