Your cart is empty.
Your cart is empty. Specifications:
Material: Sintered Bronze
Bore Diameter: 5mm
Outer Diameter: 9mm
Total Length: 10mm
Package Contents:
6 x Sleeve Bearings
Description:Sleeve bearings are also known as plain bearings or bushings, mostly for guiding or reducing friction in linear applications. Oiled Bearing Sleeves have a small friction coefficient of about 0.12-0.18.
They are made of powder-metallurgical metal, which has a large working temperature range from -80 degrees Celsius to 120 degrees Celsius.
Bushings provide strong housing for a shaft or fastener. They also help to reduce bore diameter or to replace worn-out original bushings on wheels.
Sintered bronze bushings are most suitable for applications with rotating movements and where self-lubricating properties of the material.
Suitable for a vast variety of industrial equipment such as electrical equipment, household equipment, printing machinery, and machine tools.
Jeepwalker
2025-02-27 13:22:31
These seemed to be uniform in size and ID. I used them to press into a cast aluminum bore inside a power tool gearbox where the existing bushing had worn out. It fit snug onto the shaft. The power tool works great again. So far so good!
Andy Martin
2025-01-17 14:56:50
All 12 bearings (I bought 2 packs) measure within tolerance (most are 8.00mm ID +-0.05)I bought these to replace IGUS bushings on my Anet A8 and they're doing a great job with no slop.Side note: Apparently I didn't read the fine print where the IGUS bushings can get chewed up by certain lubricants, but that's a user error and no fault of the product's.
Robert S
2025-01-09 16:55:31
I needed a bushing to improve the functionality of a photographic light boom. These worked perfectly. Just searched for the size, sorted through the options. A nice little bag leaves me enough for a couple of other projects.
Hammercl
2024-12-30 17:20:00
These are extremely hard and well worth the price. I used two of these as soon as soon as they arrived. I highly recommend these for anyone looking for a good Bushing.
A. Myers
2024-12-01 20:54:00
EDIT: Very brittle looks to be sub par casting..These are ok. There bushing so...? Not sure why Its impossible to find 17mm OD bushings? But I will just mill or file these down to fit.. Same with the ID.. Should work fine, look to be soft enough.. I will press these in as well.. So not to bad to fix.. Will see..
DarkLight2sure
2024-11-20 13:49:34
The tolerance on my mk2s is a little sloppy will look for other option
Galenmacil
2024-11-13 15:52:21
...that operate like sleeves.
Martin
2024-11-12 10:01:24
Snowblower
Recommended Products
