Your cart is empty.
Your cart is empty.Product Description
Copper Clad Board
Specifications
Material: FR-4 Glass Fiber, Copper
Layers: Double-Sided
Applications
Widely used in television, radio, computer, mobile communications, and other electronic products.
Features
- High mechanical and dielectric properties
- High flatness, excellent bending strength at high temperature
- Good heat resistance and moisture resistance
- Low thermal conductivity, excellent processing performance
NOTE
- Length Tolerance: +/-3mm.
- Width Tolerance: +/-2mm.
- The fingerprints or scratches on the surface does not affect its use.
- Please pay attention before purchasing!
Application
PCB Circuit Board Making
Name Board
DIY Experiments
Ystertjop
2025-08-25 16:04:11
Works well for both heat and UV transfer as well as hand drawn circuits.I would recommend.
scott pelton
2025-08-06 18:29:56
Good grade of base epoxy fiber and copper clad. Prints and etches very nicely. Fast shipping.
anto77
2025-08-05 13:11:39
the boards arrived a little scratched up, most of the scratches were shallow, superficial and didn't effect when I etched the boards, but there were a few deeper ones. they etch well, but make sure to wash them well before printing on them.
PenRev
2025-07-08 11:12:24
Nice boards for my Electronic Hobby.Would buy again.
Roy
2025-04-22 17:37:00
I attempted deep engraving with my laser engraver, expecting it to completely isolate traces, but the board still conducted electricity in areas that should have been non-conductive. Low-quality copper layers or poor adhesion to the substrate could be a factor here… other similar products have worked flawlessly with this same process…Overall, I’m disappointed with the quality and durability. The product didn’t meet my expectations for either packaging or functionality. Improvements in shipping protection and material quality are necessary for a better customer experience.
Andrea
2025-03-21 10:59:57
i took my chances based on the review i saw, and unfortunately this time i lost. The boards are of a VERY poor quality and have MANY defects. Of the 5 boards, none were free of defects. If i had more time, i would absolutely return these for a refund. I will be asking amazon support for at least a partial refund as these are just so bad i was only able to finish my project by breaking apart the circuit into several smaller circuits, using the "best parts" of these boards, then soldering the pieces together... Buyer beware! these boards are truly awful.
Lunix
2025-02-07 11:16:42
I just got these and opened them. I took photos of one side of two different boards. (They're two-sided copper.) I would not use these to make PCBs- they'd cause problems. But I'm not using these for that (and I stopped making PCBs for myself a few decades ago). I'm just using them for some shielding and, one for ESD protection on my bench. The third phot shows some of what was on the paper towel after I used Scotch-brite, then wiped both sides with acetone. Hmmm...not great.I've seen similar complaints about other brands of cheap boards on Amazon. PCBs are so inexpensive now, it's not really worth making them yourself anyway (unless you are trying to learn).
Joe
2025-01-17 17:04:03
Mild damage. But overall, good for the price
Nathan M.
2024-12-10 13:10:07
All 5 boards are precisely and equally trimmed, but to 180x119mm, not 180x120mm as advertised.Otherwise, the boards appear to be completely flat. Thickness is correct at 1.5 mm. Material appears to be FR-4 (not phenolic, anyway).The copper surface is very clean, with only superficial blemishes, and one scratch about 5mm long near the edge of one board.Deducted 1 star for the 119mm and the one scratch.
PeteH
2024-12-09 18:21:47
WILL BE FIT FOR PURPOSE.DELIVERY TIME GOOD.
Tinkerer Mike
2024-11-28 17:00:28
Accurate dimensions, structurally sound
Jean-Francois Houde
2024-11-25 18:15:16
les 5 circuits PCB sont de mauvaise qualité. tous avec des défauts sur le cuivre! impossible d'utiliser ces PCB en électronique
Recommended Products
$17.99
$ 8 .99 $8.99