Your cart is empty.
Your cart is empty.andrewski
2025-08-18 12:46:42
Works as it should. Used it with a load cell amplifier and read to Arduino. Seems to be accurate.
D. Lahrman
2025-07-10 19:23:49
THe glue holding the wires down is terrible. Broke right out of the box and return window had already closed. Would NOT recommend
Jason Mativi
2025-07-05 18:57:07
This device was fairly easy to obtain data from using the standard wiring scheme, an INA125P Instrumentation Amplifier, and a multimeter (or Arduino). Howevever, if you are using an Arduino, you will need a higher resolution ADC to obtain better than 0.1g precision. The packaging is a little cheap in that the lead wires are not connected as well as they could be, this being the source of intermittent operation and noise until I figured it out. The holes are M3 metric threads.
Customer
2025-06-28 16:00:40
Wires are very small around a 26 or 28 gauge which makes them hard to connect to other wires and connection is very fragile.
Matthew Sorensen
2025-06-12 15:12:31
Very poor packaging - the sensitive wiring was already torn when it arrived. Also covered in a strange residue.
Stephen H.
2025-05-25 11:37:45
I'm using these with the HX711 analog to digital converter boards and they work great! Just what I needed to build a small electronic scale. I found that the holes are threaded for 3 mm .5 thread pitch screws. I did manage to break off one lead so I had to replace one (and I bought a spare this time!) but I had been messing with them for several months on my workbench. If I had them installed in my project sooner I think I would have been fine. I don't know if I can link to a video here but if you search for Ralph Bacon Arduino Coffee Cup Coaster on youtube that's where I found the code that helped me the most. [...]
Gavin R
2025-05-09 12:51:55
Came with flimsy construction (the glue was stripping) and I just couldn't get it to work with the HX711
Kindle Customer
2025-05-01 15:31:16
Excellent! Very sensitive, with no apparent thermal drift. Exactly what I wanted.
Philimon
2024-11-29 14:29:00
Fast delivery and the item worked just fine. I'm trying to build a jewellery scale that measures in 10ths of a grain (approx .006 grams) and I found that this module would drift by up to half a grain within seconds. That's fine for most applications, just not for jewellery.
Recommended Products
$59.99
$ 27 .99 $27.99