Your cart is empty.
Your cart is empty. Description:
1.10 Pins Connector Flat Ribbon Cable,2.54mm Pitch
2.Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies.
3.The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins.
4.Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors.
NOTE:
The "Type-B" means the pin holes towards to the same side, meanwhile, the two buckles are both inside.
Specifications:
Product Name: Flat Ribbon Cable
Pin Number: 10
Pin Pitch: 2.54mm
Length: 66cm / 25.98"
Total Width: 12.6mm / 0.5"
Color: Rainbow Color
Connector Type: Type B (Please refer to the last picture)
Package Content:
1pcs x Flat Ribbon Cable
Zyla
2025-08-07 15:01:12
Used to connect up my BTT TFT display as I needed longer cables than supplied. I did have to cut the notches off of one of the ends to get the orientation proper for my use.
Jerma Panda
2025-05-18 14:15:51
It works, and it’s exactly like the original and allowed me to put the original back as a spare part. Only purchased because we redid everything in the printer as we rebuild it.
DRB_Mac
2025-03-17 11:18:56
I anticipated that these would be straight through but the connectors are reversed on one end so they did not work on my BTT SKR 2. Pin 1 does not go to pin 1 on the other end.
Jon
2025-01-08 15:46:56
When I plugged this into my Ender 5 and powered up the printer the screen was black. After diagnosing the connection and testing my original cable I remembered reading that another manufacturer's cable needed to be reversed. This cable suffers the same flaw. After I clipped off the plastic centering pin and plugged the cable in reverse the screen lit up. Cable works great otherwise and is plenty long.
Recommended Products
