Product Description

How to measure the length of the required belt:

Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

To accurately measure the length of the v-belt, use a belt measuring tool or a soft ruler, not a steel ruler.
The width and thickness of the belt should also be measured to confirm the type of belt.

Installation:

First, loosen the tensioning device, then press the v-belt into the pulley groove by hand, and finally tighten it again.

Notice:

Pay attention to the wear of the belt groove of the v-belt pulley.
Check whether the centerline of the two pulley shafts is parallel, whether the corresponding pulley slots are aligned, and whether there is any skewing phenomenon.
When one v-belt is badly worn and cannot be used, replace all the v-belts at the same time, with the same type and equal length, so that each belt has the same tension.

Maintenance:

Regularly check the v-belt tension, after adjustment still can not meet the specified requirements, must be replaced with a new v-belt.
In use, the operating temperature of the v-belt should not exceed 140°F, do not apply belt grease casually.
Various types of v-belt, should not be coated with rosin or sticky substances, but also to prevent v-belt from oil, butter and gasoline, otherwise, it will corrode the v-belt, and shorten the service life.
V-belt should be stored at a relatively low temperature, with no direct sunlight and no oil and corrosive fumes place.

Application

Lawn Care Equipment

Repair lawn equipment, snow removal machine

General Purpose

Repair band saw, box fan, drilling machine, trimmer

Automotive Repair

Replace the automotive belt



Customer Reviews	66	228	276	107	31	18
Type	B	A	M	K	O	SPZ
Width	16mm	13mm	10mm	8mm	10mm	10mm
Thickness	11mm	9mm	6mm	6mm	6mm	9mm

Matt c.

2025-07-13 20:39:35

Works and is true to size

L Harris

2025-07-07 16:03:28

Appears identical to OEM belt on older 10 speed Craftsman drill press.

Carl Rogers

2025-07-03 19:47:40

It is not advertised for this snow blower, but it is a better belt than another one I got that was advertised for it. A perfect fit from what I can see. The snow blower does not slip at all, even in heavy snow. The other belts I bought, including the original on the blower, did not last long at all and slipped in heavier snow. This one holds tight and works great. Perfect for my Snow Joe SJ627E!

PawPaw

2025-06-17 15:48:45

Nice quality belt.

2025-05-29 17:07:02

The size is correct. Although it has a strong cheap rubber smell.

MILAGROS

2025-05-11 10:29:16

Resistente

David I

2025-03-31 10:03:07

Doesn't fit a craftsman tiller that it was ordered for.

Edna H.

2025-03-29 18:25:08

The M23 Drive V-Belt Girth 23-inch Industrial Power Rubber Transmission Belt is an exact replacement for my wood lathe. I looked it up on you-tube and found it easy to replace. Works gust like new!

Dan Ermel

2025-03-10 16:36:56

This item was too long, making it not useable. I requested refund assistance from Amazon but have heard nothing yet. The rating system will not let me give ZERO stars sadly.

Joseph

2025-02-15 13:05:27

Same width and height but longer then the m-25 that came off my washer.

Jean-Claude Bouthillette

2025-02-07 13:22:22

trÃ¨s bon produit

Timi

2025-01-24 17:03:36

TrÃ¨s bon produit. Identique Ã la description. Satisfait de mon achat.

VinnniE

2025-01-12 16:45:08

It is what it is

Shopping Cart

Your cart is empty.

uxcell M-24 Drive V-Belt Industrial Power Rubber Transmission Belt 24' Pitch Girth 10mm Width 5.5mm Height JIS Standard

1.Size:16

About this item

Product Description

Application

Lawn Care Equipment

General Purpose

Automotive Repair