Your cart is empty.
Your cart is empty.
Specification:
Model: SCE812
Drawn Cup Material: Steel
Cage Material: Steel
Needle Roller Material: Chromium Steel (GCr15)
Accuracy: P0
Bore Diameter (Fw): 1/2"
Outside Diameter (D): 11/16"
Width: 3/4"
Limit Speed: 19500RPM
Dynamic Load Rating: 9900N
Static Load Rating: 14300N
Construction : Single Row
Number of Pack: 10 Pcs
Description:
-They are compact bearings with high load carrying capacity and stiffness.
-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.
-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.
Note: Use a press or special tool (not a hammer) for installation, as runout may cause local deformation or brittle breakage.
jeffrey a. brewer
2025-08-18 16:47:02
they worked as designed
K Hogan
2025-08-15 09:29:44
these fit perfectly. note these are "open" meaning open at both ends
R,Schmidt
2025-07-25 17:25:38
Its a bearing that worked for me
Nathan W. Bading
2025-07-18 18:06:53
The SCE65 bearings were good as avertised. One set of the 2 5 ea SCE 45, ordered with this order, has plastic cages around the needle roller bearings, the other has steel cages. I won't be able to use the plastic caged needle bearings in the application I intended, High Vacuum Service.
AB
2025-06-13 16:06:04
This was just what I needed for the assembly of my 6 cup Turner. It’s spins very easily and it’s easy to install. If you’re making a cup turner I would recommend these to you as they are perfect for it. Perfect size and width. Can’t beat the price.
Oscar Sánchez
2025-05-30 21:05:04
Muy buen producto
karl
2025-05-22 14:47:57
Fit as needed and very good deal. My application is not hi speed so these should last well after I am gone.
Glen
2025-05-18 11:52:48
On the 3/8" bore model, I used a precision ground 3/8" rod. The bearings have too much play on all of them, and some are extremely loose. So I tried a 3/8 + .001" rod and still didn't get a good fit, certainly not even close to a friction fit. Some are much bigger than others and one of them was grinding. I would say these are factory rejects or at the very least the factory isn't making a consistent product.
Guillermo r.
2025-05-09 13:03:16
Muy buen producto. medidas exactas, de buenas calidad, en cuanto a la duración solo el tiempo lo dirá ,lo recomiendo 💯
chester
2024-11-25 19:32:43
Not well made for medium or heavy usage.
Recommended Products
