Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Sleeve Bearings 10mm Bore 14mm OD 10mm Length Sintered Iron Self-Lubricating Bushings 6pcs

4.8 (10) Write Review
Free shipping on orders over $29.99

$5.69

$ 2 .99 $2.99

In Stock

1.Size:6.7x15x16mm


About this item

  • Size - Bore Diameter: 10mm, Outside Diameter: 14mm, Length: 10mm
  • Material - Sintered Iron. They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant.
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft.
  • Application - Iron bushings are most for applications with high load and lower speeds. Sleeve bearings are used in a vast variety of industrial equipment.
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels.


Specifications:

  • Material: Sintered Iron
  • Bore Diameter: 10mm
  • Outer Diameter: 14mm
  • Total Length: 10mm
Package Contents:
  • 6 x Sleeve Bearings
Description:
  1. Sleeve bearings are also known as plain bearings or bushings, mostly for guiding or reducing friction in linear applications. Oiled Bearing Sleeves have a small friction coefficient of about 0.12-0.18.
  2. They are made of powder-metallurgical metal, which has a large working temperature range from -80 degrees Celsius to 120 degrees Celsius.
  3. Bushings provide strong housing for a shaft or fastener. They also help to reduce bores' diameter or to replace worn-out original bushings on wheels.
  4. Sintered iron bushings are most suitable for applications with rotating movements and where self-lubricating properties of the material.
  5. Suitable for a vast variety of industrial equipment such as electrical equipment, household equipment, printing machinery, and machine tools.

B. Robertson
August 31, 2025
When I received these I measured them and they have the correct dimensions.
Flyin_Fer
July 24, 2025
The Craftsman 4" table vice has a super loose pivot and only one rotation clamp. The 17mm outer 14mm inner fits perfectly to correct this. 12.5mm is probably about 2.5mm too long, but it still works (and I have 5 more I can attempt to grind down if needed).
Freddi Guerrero
May 26, 2025
These things are perfect for custom work. I replaced my shift lever on my motorcycle with a different model so the inside diameters were off and caused alot of play, thanks to uxcell it covered the gap perfectly.
Hilary Backman
May 19, 2025
Fully solid and no seams!
Hosey O'Grady
May 15, 2025
The OD is larger than 14mm and the Bore is Less than 10mm. If I wanted to re-machine them I would have just made my own. Buyers Beware.
scott
May 4, 2025
Metal cheap and brittle not something you want to use as a spacer or bearing. Holes were not every machine right.
Greg Kraemer
April 20, 2025
Improper sizes only received half of my order
Psi
April 17, 2025
It took most of the slack, so now I'll just use a small amount of silicone sealant to keep it from moving the little it might otherwise.
Joe
April 1, 2025
I used this as a rolling bearing within a sleeve for my motorcycle! It works great had to cut to size but for the value, this works for me!
KingSlayer Customs
December 23, 2024
Exactly as described.