Your cart is empty.
Your cart is empty.Product Description
Accessories for vacuum machines for the kitchen
Replacement accessory, ideal for replacing the foam gasket of your vacuum sealer with 1 or 2 gaskets. When the gasket deteriorates, installing and replacing the gasket is helpful for improving the suction and vacuum sealing performance, so that the appliance can exert the best effect.
The packing quantity is 4 pieces. For the model with 2 gaskets, please replace both gaskets at the same time to get the best effect.
Kitchen vacuum seal machine accessories
Model: for replacement of V2200 (V2220, V2222, V2240, V2244, V2250, etc.), V2400 (V2420, V2430, V2461, V2432, V2433, V2440, V2450, V2440), V2830, V2835, V2840, V2841 series, V2860, V2865), V3000 (V3020, V3040, etc.). ), V3200 series (V3240, V3250, etc.), V3400 series (V3425, V3440) V3800 series (v3810, v3815, v3816, v3817, v3820, v3825, v3835, v3840, v3845, v3850, v3860, and v3880).
If the old sealing ring deteriorates and weakens the vacuum, it will lose its suction power. Replace the sealing ring and your vacuum sealer will run like new again. Your appliance will be vacuum-tight again, you will always have spare gaskets at hand and the machine will never fail to work due to gaskets ageing, damage.
Accessories for kitchen vacuum sealer appliances
Made of high quality elastic material.
Easy to install
For some appliances, installation is simple: just remove the old gasket and replace it with a new one.
On some appliances there are two gaskets, one upper and one lower, and both old gaskets must be replaced at the same time.
Test the vacuum seal after replacement
If the gasket is too long or too short, it can be heated with a hair dryer to blow hot air on the gasket, and after heating, it can be flexibly installed and used after cooling.
george agius
2025-08-28 18:25:11
Was worried they would not stay in my machine but not the case made a big difference in sealing bags works like new.
Master Gunzz
2025-07-25 15:46:19
Outstanding SELLER and PRODUCT! A pleasure to do business with.
Customer
2025-07-18 21:14:26
Made my sealer act likr brand new
The Poetic Chef
2025-07-16 17:07:04
Fit was great and product looks like it will last.
AKCuisine
2025-07-15 17:32:08
My favorite vacuum sealer is my ancient FoodSaver V2244, a model that’s well over 10 years old by my count. Earlier this year the thing decided it was tired of evacuating air from bags. Would it heat-seal them? Sure, no problem. But it didn’t want to suck air. I tried in vain to find another device that was both compact and easy to use, but I almost gave up hope. Then I found out that KAIHENG carries replacement gaskets for a variety of V-series models – and my heart skipped a beat.Sure enough, removing the old gaskets and inserting the new ones was a snap. They fit perfectly in both the upper and lower sections of my V2244 device. I tried it out after the installation, waiting to see if it would inhale. Could it take a deep enough breath to really suck the air out of a bag? I held my breath as I pushed the “Vac/Seal†button, waited, then – SWOOSH! – I held a perfectly vacuum-sealed bag. It’s not quite a miracle, but I thought my old machine was a goner and these gaskets brought it back to life.Since that first test, I’ve prepped and filled bunches of vacuum bags that were destined either for the freezer or for a nice long soak in the sous vide bath. Each time, my old vacuum sealer has been up to the task. Instead of ineffectually wheezing like an octogenarian taking its last breath – as it had been – it’s now humming along, acting like it's a teenager ... an age more in tune with this circa-2010 model.BOTTOM LINE: These KAIHENG replacement gaskets are an excellent fit for the FoodSaver V-series device models that are listed on the product information page. If your older model device has developed trouble sucking – fully evacuating air from bags – then replacing the foam gaskets may solve the problem. The gaskets certainly did fix mine.
Utah #1
2025-07-12 13:32:16
The online description (see the pictures) says these gaskets are 0.23 inch wide (cross-section dimension). If they were actually that thickness then they would be perfect, since the OEM gasket is 0.235 inches wide. However, they are actually only 0.20 wide, so they fit in the vacuum sealer groove very loosely and tend to lift out of some part of the groove after each vacuum cycle. The cross-section height of these gaskets is not shown in the description (unless the strange 0.26 dimension shown is supposed to be 0.36 inch - which, coincidentally, is the actual OEM gasket height), but actually measured 0.335 inch on the gaskets I received. So these are smaller in both cross-section dimensions that the OEM gasket they are meant to replace. OEM dimensions: 0.360 x 0.235 inch vs these replacements: 0.335 x 0.200 inch. Measurements where made with a gently applied vernier caliper, both OEM and these replacement gaskets at the same sitting. Advertised dimensions for these replacements is ?? x 0.23 inch. When installed, my experience was hit and miss for beings able to pull vacuum. Sometimes they work fine for a given cycle, sometimes I can not achieve vacuum - same bag, same contents, same machine, same sealing session. They can be made to work for me in a pinch, but advertised dimensions are not accurate, and sealing results are not consistent.
Michael O.
2025-06-09 19:05:38
Installed these new gaskets into a FoodSaver model VS3180. The new gaskets are a slight bit thinner than the original ones, but they seemed to fit well. However, that did not fix my problem (unit stopped sealing last summer, which I assumed meant the gaskets were worn). I received 4 gaskets in this order and I tried them all. I want to be fair about the review, so give the item 4*...but if you have a similar issue with your vacuum sealer, it's probably not safe to just assume the gaskets need replacing.
Wombat37
2025-06-01 17:57:26
I’ve been using a FoodSaver V3460 vacuum sealer for many years. I use it to store hops, bulk-cooked meals for sous-vide, fresh meat, etc., etc. It’s semi-automated and, although it has a few quirks, I’ve been generally pleased with it – until recently. Lately I’ve had a hard job getting bags to seal properly. I’ve carefully cleaned the seals and gaskets inside but this didn’t seem to make any difference.Eventually, I ordered another brand of vacuum sealer product, which I don’t like at all – it’s difficult and tedious to use. So, I took another look at the old FoodSaver. It wasn’t easy to see, but although the upper gasket was fairly clean, it was slightly distorted in places. I ordered this replacement gasket kit from KaiHeng to see if this would fix things.The product quickly arrived in a pack of 4. Unfortunately there was no documentation and it’s not obvious how to replace these gaskets. I went on-line and watched a few YouTube videos that guided me on how to make this replacement. Apparently these gaskets are just pushed in and can be easily pulled out and replaced. Apparently FoodSaver hadn’t watched these videos and had used a really strong hard glue to install the original gasket. I spent a full hour chiseling out this glue! Once the glue was gone, I tried following the online videos and just pushed in the new gasket without any glue. It worked, the gasket seemed to stay in place during use.My old vacuum sealer now works as well as it ever did – it seals quickly and tightly. I am very pleased with these gaskets, and I have another three spare so I can keep this product running for another 20 years, or so.
Pulson
2025-02-16 15:06:19
My foodsaver stopped automatically sealing. I replaced the old worn out top and bottom gaskets with these replacements and now it works a treat again.
Jimbo
2024-12-27 17:13:06
Works well made a massive difference on sealing
Anton Puntigam
2024-12-20 18:55:32
Perfekt
Debs
2024-11-29 17:38:42
These worked out great. Arrived quickly
Charlotte5
2024-11-23 13:22:52
Changement
Recommended Products