Your cart is empty.
Your cart is empty.Product Description
Product Description:
100% Brand New, Never Been Used or Installed
Made from High Quality Materials
This is a Two Gasket Kit, For Both Left Side and Right Side
Professional Installation is Highly Recommended
Instruction is Not Included
Package Includes:
2X Valve Cover Gaskets with Dual Integral Fuel Injector Connectors
2X Correct Outer Connector Plug with Pigtail Harness for Splicing
As the Picture Shown
Feature:
- Heat Resistant
- Oil Resistant
- Direct Replacement
- Single External Connector Gasket Design
Fitment:
Compatible with 1998-2002 Ford E-350 Econoline Club Wagon 7.3L
Compatible with 1998 Ford E-350 Econoline 7.3L
Compatible with 1999-2003 Ford F-350 F-450 F-550 Super Duty 7.3L
Compatible with 1999-2003 Ford F-250 E-350 Super Duty 7.3L
Compatible with 2001-2003 Ford Excursion 7.3L
Compatible with 2003 E-350 Ford Club Wagon 7.3L
(Except 2000 Excursion)
GREAT GLOW PLUG WIRES
The glow plug wires with right size,you can seat them more easily, the metal in the clip is easy to seat on the glow plug and and has pressure to hold itself snugly to the plug.
keith nilsson
2025-09-04 16:28:26
Contrary to the other posts it fits perfectly and bolts as well, maybe they didn't have true IH heads but my truck was brand new with 14 miles off the lot so it's never been changed and I don't let anyone work on it without supervising them
Clayton Clark
2025-08-27 14:31:50
The gaskets didn’t line up with the Valve covers right and when put on and started truck up, they were bad from the beginning, causing my truck to have a misfire makes second time I have tore down and put new gaskets in it and won’t send me another set because of their mistake
JP1955
2025-08-23 15:54:00
Fixed my dead cylinders and now runs like new. Word if caution, be careful with wires that they are not pinched between the valve cover and head during reassembly.
Clifford D.
2025-07-25 15:01:13
What a pain to get in the bolt holes are just a bit off and you have to push and pry to get bolts back in. No cable holds, just cheap zip ties.
Gail D.
2025-07-20 14:26:58
1 one 2 did not work. Had a direct short. Poor quality. Do not recommend
MKM
2025-07-17 12:36:38
POSITIVE:It does NOT have a connector under the valve cover - which is he reason many folk replace this. This product was as easy to install as anyother brand.NEGATIVE:The Wire insulation has failed and developed cracks. The Cracking wire insulation causes the injector wires to short out under the Valve Cover causing irregular firing. The Wires are also smaller than other brands. Not reliable nor a quality product for long term usage.
John isbell
2025-07-15 10:50:47
Less than 100miles on these all torqued to 18ftlbs and leaking in the lower rear corners no doubt because the holes do not line up. I would definitely not buy these again.
Corey reed
2025-07-02 15:37:45
Junk plastic. Bolt holes don’t line up. Buy OEM
keith nilsson
2025-06-30 12:19:40
Contrary to the other posts it fits perfectly and bolts as well, maybe they didn't have true IH heads but my truck was brand new with 14 miles off the lot so it's never been changed and I don't let anyone work on it without supervising them
Clayton Clark
2025-06-11 12:36:50
The gaskets didn’t line up with the Valve covers right and when put on and started truck up, they were bad from the beginning, causing my truck to have a misfire makes second time I have tore down and put new gaskets in it and won’t send me another set because of their mistake
JP1955
2025-06-08 13:42:52
Fixed my dead cylinders and now runs like new. Word if caution, be careful with wires that they are not pinched between the valve cover and head during reassembly.
Clifford D.
2025-05-15 10:31:30
What a pain to get in the bolt holes are just a bit off and you have to push and pry to get bolts back in. No cable holds, just cheap zip ties.
Gail D.
2025-04-27 12:28:15
1 one 2 did not work. Had a direct short. Poor quality. Do not recommend
MKM
2025-02-11 13:52:02
POSITIVE:It does NOT have a connector under the valve cover - which is he reason many folk replace this. This product was as easy to install as anyother brand.NEGATIVE:The Wire insulation has failed and developed cracks. The Cracking wire insulation causes the injector wires to short out under the Valve Cover causing irregular firing. The Wires are also smaller than other brands. Not reliable nor a quality product for long term usage.
John isbell
2025-02-09 10:51:56
Less than 100miles on these all torqued to 18ftlbs and leaking in the lower rear corners no doubt because the holes do not line up. I would definitely not buy these again.
Corey reed
2025-01-27 17:49:48
Junk plastic. Bolt holes don’t line up. Buy OEM
Recommended Products