Your cart is empty.
Your cart is empty.Product Description
Elevate Surface Treatment with Precision Sandblasting
Experience efficiency and durability with VEVOR sandblasting cabinet. Our benchtop blasting cabinet offers 40-gallon spacious capacity, providing ample room for a range of blasting media. It's the perfect addition to DIY enthusiast's workshop, perfect for rust, paint, and oxidation layer removal.
Our sandblaster kit comes equipped with a premium aluminum blasting gun, offers durability and precise control. The kit also features 4 ceramic nozzles in sizes 4.5mm, 5mm, 6mm, and 7mm, offering superior wear, corrosion, and heat resistance compared to metal nozzles.
For smooth operations, clear visibility is key. Our portable sand blasting cabinet boasts a transparent acrylic observation window and LED tube lighting, providing ample and clear visibility to observe the work process, ensuring smoother and more efficient sandblasting.
Constructed from heavy-duty cold-rolled steel, our air sand blaster cabinet is exceptionally durable. Its powder-coated surface enhances resistance to corrosion and rust, ensuring longevity and reliability for your sandblasting needs.
VEVOR sandblaster kit is versatile for a wide range of surface treatments across various materials. From rust and oxidation layer removal to deburring, edge smoothing, old parts refurbishing, and sandblasting engraving, it effortlessly fulfills diverse needs with precision and ease.
Jim T.
2025-08-14 18:55:55
Having used larger units in industry, I honestly wasn’t expecting much. I also wasn’t sure how well my smallish 5.3cfm@90psi/6.7cfm@40psi compressor would keep up but it does just fine. I don’t have to stop and let the compressor catch up any.The instructions were clear enough, all the hardware was already sorted and labeled. It arrived well packaged and with no damage.At 50 psi it does a great job with 80 grit glass beads. The trick is use the least pressure you can or you will quickly turn your beads into dust.Imho, a cyclone dust separator and a water/oil filter are required accessories. My cabinet seals up well enough that when I kick on my shop vac I can’t open the door from the pressure differential. The cyclone dust separator is very effective at capturing the dust before it ever reaches the shop vac.I used the Woodstock W1042 2-1/2-Inch Universal Dust Port from Amazon mounted with double sided tape to facilitate the use of the dust collection system.I also sourced the NANPU 1/4" NPT Compressed Air Line Filter, 5 Micron Element, Bracket, Poly Bowl, 145 psi from Amazon. I have it mounted at the cabinet and it does a good job of preventing any condensation from contaminating the beads.I use 80 grit glass beads that I source locally.I am very satisfied with the product quality, performance and durability, especially at this price point.
JimP
2025-08-06 12:40:46
I bought this as an additional blast cabinet in my machine shop.Assembling it was kind of tedious, took me around 3hrs.Other than that I am quite happy with it.i used the tube sealant that was sent with it to seal the up and down seams.The bottom floor had a rubber gasket preinstalled.I did install a vacuum hose to it and run it through a turbo dust collector.I use this with fine glass bead, using the smallest nozzle at 50PSI.Works great for my intended use.
Anna Beitel
2025-07-30 15:05:47
I purchased this for my adult son. He is restoring an old Corvett and needed to clean up some parts. He absolutely loves how the parts are coming out. It is small and portable but works great for all those smaller parts.
Nicholas Baxter
2025-06-17 14:47:36
Don't waste your hard earned money. So I read and watched a few reviews. I went way above and beyond to seal this thing up so that I didn't get sand in my face. The lid leaks horribly no matter what I did. I ended up adding a shop vac suction adapter to it to help cut that down. My biggest gripe is the gun quality. Unless you are doing an object the size of a index card, prepare to loose your mind. You literally have to jiggle the suction end of the hose in the sand to move it around every minute or so as the sand does not flow down to it well. I tried 3 different types of product and quantities now and always have same end result. The shallow taper of the pan doesn't allow it to flow to the bottom well enough to reach pickup. The actual gun isn't efficient either. The output is sporadic and doesn't flow near as well as my buddies Harbor Freight Model. I would so return this if I had not already had it assembled on my bench.
Richard H.
2025-06-03 14:01:41
The thing does what it is supposed to do. If you need the assembly instructions to put it together, do not buy this product, the assembly instructions are terrible. They give no clue regarding how to set it up or use it. This product comes with an inside light. Neither the on/off switch for the light nor the power adapter supplied worked. I had to get another power supply and rewire the switch to get it to work. When I contacted Vevor, they wanted video or pix sent to them.Would I buy this thing again? NO!
fox
2025-05-31 14:18:00
For thw most part, there are no assembly instructions - vague diagrams, at best, is provided. It would have a huge impact if the assembly documents were on the Amazon site, I likely would not have purchase it. The 24/7 help line is worthless, it took 8 days for them to figure out what the liquid gasket (nothing in the assembly documents), was for and, even then, the information was incorrect as far as I could tell from research on similar cabinets of other manufacturers. They are courteous and willing, but every question has to go to a tech team which takes 2 - 3 business days to get a response. I had to send them a picure of the liquid gasket tube before they would provide a response. It is obvious they do not know there own product. The panels are warped from the forming process and exrremely difficult to assemble, you will need a lot of clamps to bend and hold panels in place while bolting together. It is difficult to determine whether a panel joint goes under or over the adjoining panel - the diagrams do not show or adress this issue. Very disappointed.
Henry L.
2025-03-27 15:29:02
All holes lineup and assembly is fairly easy.Good quality product.
Jason
2025-03-22 16:34:09
Affordable, and easy setup. Works great, door seal should be thicker though, a lot of dust gets out right in your face
Customer
2025-02-10 21:04:57
ðŸ‘ðŸ‘ðŸ‘ðŸ‘ðŸ‘ðŸ‘ðŸ‘
Elisa Pehl
2025-02-09 11:03:52
Die Kabine funktioniert hervorragend!Ich habe beim Aufbau zusätzlich (hochwertigeren) Dichtkleber verwendet, um wirklich alles dicht zu kriegen. Zusätzlich betreibe ich die Kabine nicht mit dem mitgelieferten Filter, sondern mit einer Absaugung bestehend aus Werkstatt-Sauger und Doppel-Zyklonabscheider.Als Strahlmittel wird 0.2-0.8mm Schlacke verwendet.Bin vom Ergebnis absolut begeistert!Für jeden, der ein altes Moped restaurieren, oder gerne etwas umlackieren möchte geradezu ideal.
Lappeman
2025-02-06 20:30:41
Comes completely disassembled so you'll need a little know how to set it up. Instructions are a little vague but I was able to work through it. The sides of the box didn't quite wanna fit but I finally got them together after trying a few different ways. Ended up using a long clamp to pull them inline to get the screws in. Everything else seemed to go together fine. There was lots of scratching on the hopper from something coming loose in the box it came in and I noticed a couple of small spots in the paint that were factory caused. Make sure you use the gasket sealant on everything except the foam seals. Also the sealant tube burst on the bottom end but I just used my finger to smear it on...I've seen a couple of videos of this happening and after a bit you can just roll the bottom up a bit. Light is plenty bright for me. I also built a wooden stand for it out of scrap lumber. The air filter for exiting air seems like it would clog up a lot so I made up a vacuum attachment and ran the hose down to a homemade 5 gallon pail cyclone and then up to the vacuum. Works really well and keeps the dust down to a minimum when blasting. Unit seems to work really well for what I use it for, small parts here and there. I'm using glass media 30-60 grit. Unit was about 99% sealed when in use...tiny bit of dust in the air after blasting. I had to add a proper air compressor line attachment to the side hole. I'm running it with a 5hp 15 gallon compressor but for continuous use it would need something a little bigger I think. Overall seems to be a very good buy.
Customer
2024-12-28 10:14:49
Works ok but the way media returns could work better. The screen deforms as well
Michael Girard
2024-11-17 14:39:58
I rarely give an evaluation, but here I am really not happy. First, when I receive my package the box is very damaged. I fear the worst, indeed each piece is poked and folded. As I am resourceful, I unfold them with a hammer and a pair of grip pliers. I end up putting everything together, and during my first use. The damn gloves tear/peel off exactly where the rubber weld. Well for $300, I expected to have a better experience!! Had I known, I would have gone to Canadian Tire to buy one of much better quality!! And above all, not damaged. Very very disappointed with VEVOR. I confirm to you that I never buy VEVOR again, finished for me. Maybe I will modify my evaluation if I receive an offer from you by, a partial refund + better gloves. Otherwise, be advised of what you buy.
Recommended Products