I purchased one Viperade Adjustable Nylon Handheld Radio Pouch to see if it would securely hold and protect one of my BaoFeng BF-8FHP radios when mounted and carried on my B.O.B.'s MOLLE webbing ladder system. The 3800 mAh Li-ion Extended Battery will be the radio's primary power source, but I might occasionally need to use it with the shorter 2000 mAh Li-ion OEM Battery while the larger battery recharges from my solar charging system's power bank. With the larger 3800 mAh battery installed, the Viperade pouch fit my BF-8FHP like a glove. It was easy to adjust it to the correct width and depth with the Velcro panels on this pouch, and its height was perfect, allowing me to snug it up to my radio with its elastic cord fitting neatly inside both the On/Off Switch and the Nagoya 16.5" Whip Antenna I use without crowding or impacting them in any way. The radio's PTT button and the Mic/Earphone or Mike/Shoulder Speaker jacks were not blocked or covered at all by this pouch. If I need to change frequencies, I can quickly and easily release the buckle and webbing strap to which the elastic cord is attached and remove the radio from the pouch to access the radio's keyboard. When finished, I can easily slide the radio back into the pouch and push the buckle closed again, securing the radio without needing to re-adjust the elastic cord again. While the pouch's front panel covers my radio's speaker, it doesn't block or reduce the radio's sound appreciably. If using the radio with either the Mic/Earphone or the Mic/Shoulder Speaker, having the pouch's front panel covering the radio's speaker is a non-issue. The Viperade Adjustable Handheld Radio Pouch is made of very durable nylon, strong Velcro strips, and durable, strong elastic cord materials, and a high level of craftsmanship is evident from the accuracy of cutting the materials, sewing the panels together with straight stitches that are doubled in those locations receiving higher levels of stress or wear. The pouch can be mounted to standard MOLLE webbing ladders with two strong Velcro strips at the top and bottom of the pouch's back side. If wearing the pouch on a standard duty belt is preferred, it has a wide belt loop that will fit the widest and thickest duty belt you might find. Either the MOLLE or belt loop will hold this pouch very securely for you to access your radio quickly and easily.The only negative I found with the Viperade Adjustable Radio Pouch was if I was using the smaller OEM 2000 mAh Li-ion Battery in my BF-8FHP radio. The pouch would allow me to adjust its height to still hold my radio securely inside it. But all of the radio's operating controls, except the On/Off switch, and the Mic/Earphone or Mic/ Shoulder Speaker jacks were completely covered by the pouch's panels. I could carry my radio in the pouch securely, but I would have to remove the radio entirely from the pouch to use it, if the smaller OEM 2000 mAh Li-ion battery was installed. When I consider the manner in which I would be using my BF-8FHP radio during a disaster situation, natural or man-made, or in a SHTF event, that one negative isn't a deal-breaker, as far as I'm concerned, so I didn't deduct a star for it. All in all, I was impressed with the Viperade Nylon Adjustable Handheld Radio MOLLE-ladder or Duty Belt Carrying Pouch's functionality and ease of use, quality of materials and craftsmanship, and value delivered for its price, compared to other competitive products.I'm making this short addition to my review because I "McGyvered" a very simple, but effective, solution to the one negative I had for the Viperade Adjustable Radio Pouch, which was that it completely covered the operating buttons and the Mic / Earphone or Mic / Shoulder Speaker input jacks when the short OEM 2000 mAh Li-ion battery was used on the BF-8FHP handheld amateur radio. I measured the dimensions of the additional space taken up by the extension found on the 3800 mAh Li-ion battery, compared to the smaller OEM 2000 mAh Li-ion battery. I then cut a small block of firm closed cell polyethylene foam the size of the additional space taken up by the extended battery from some packing materials saved from previous shipments. Whenever I need to use the smaller OEM 2000 mAh Li-ion battery on my BF-8FHP radio when it is carried in the Viperade Radio Pouch, I simply slide the block of closed cell foam into the pouch and push it to the bottom, then slide the "short" BF-8FHP radio in on top of it and snap the elastic cord's buckle closed. Now all the radio's controls are out in the open and easy to use and I can insert and remove the Mic / Earphone or Mic / Shoulder Speaker into its jack with no problem. It looks just like I have the extended battery on my radio, instead of the smaller OEM battery. Problem solved, and the Viperade Adjustable MOLLE Radio Pouch easily earns the 5-star rating I originally gave it. If you were having the same problem, I hope you read this and can solve your problem as easily as I solved mine.

This is one of my newer radio hoslters and I quite like it. It is adjustable so depending on how tall or wide your radio is it can make up for that in durability. I've dove onto the ground with it, layed on it and got it snapped on thorns and it still holds up very well. It is also really easy to unclasp and adjust how tight you want the radio in there or even to chang frequencies. All around a great product!

It’s secure, and easier access when I have to change channels. Especially working out of a car. Holds big and small radios. Fits Motorola 5000 perfect. Mole doesn’t go all the way up the back so it’s not perfectly flush against vest but it works well

Excellent design and value. Holds my work radio securely. Easy to use. Recommend this product!

Way better quality than I expected for the price. Design is also great. Fits both my UV-82 and 5RM radios from Baofeng perfectly. Highly adjustable for radios of varying size. Buying a second one to have for my other rig. 10/10 recommend.

I got this pouch to place on my vest. It said that it was molle compatible, but it isn't. The attachment system on this is 2 vertical velcro straps and a couple of horizontal velcro straps. When attached to a molle system, this radio holder will slide around vertically. But if your going to attach it something else, like a duty belt, it might work.Now some of the good things for this radio holder is its adjustability. You can adjust the width and height to fit many radios, which is awesome. The buckle to keep the radio secure was also well thought out. All the seams on mine seemed well sewedBesides the lack of true molle compatibility this was a good radio pouch. It just doesn't work for my needs.

Works well so far. Holds radio perfectly. Fully adjustable top to bottom left to right.

Adjustable and strong material used for this holster. The multiple velcro attachment is a plus. The holster can be put on your belt, molle, backpack strap, pretty much anything vertical or horizontal. The radio can be large or small, very smart design. This will last me awhile. I can also use this for my digital video camera like a body cam. Good value.

Finally a holder for smaller radios (like uv5r with either battery size) that doesn't suck. Easily configurable. Doesn't block ports. Maybe the built in molle loops are a little short but a couple external ones and it mointed perfect.

Happy with purchase.

Die Funke sitzt und wackelt nicht! gut Spannung ist drauf auf dem Seil!

Tres bon produit!

Excellent quality