Shopping Cart

Your cart is empty.

Your cart is empty.

VViViD+ Honeycomb Matte Smoke Taillight Tint Bulk Vinyl Roll (1ft x 5ft)

Free shipping on orders over $29.99

$56.75

$ 30 .99 $30.99

In Stock

1.Size:6ft X 5ft


About this item

  • VViViD+ Honeycomb Matte Smoke Taillight Tint is a unique, ultra-modern design, combining a tough-looking grainy matte base, with a gloss finish hex pattern. Guaranteed to turn heads.
  • This product is built like a color change wrap and may be used on paint, trims and architectural projects as well as taillights.
  • New and improved vinyl formula developed in Canada reduces the risk of shrinking or peeling almost completely.
  • Ultra-Clear Adhesive allows you to lift and reposition this tint multiple times without risking fingerprints, glue lines or marring. Dry application requires no messy liquids!
  • High Visibility: VViViD’s hardened acrylic adhesive ensures your taillight will remain bright enough to be visible. Unlike other adhesives, it won’t damage surfaces or coatings.



Product Description

Una luz trasera de automóvil envuelta en vinilo VViViD+ Honeycomb Taillight Air-Tint

VViViD Vinyl presents the worlds first Honeycomb-pattern Tail Light Tint, with a never-seen-before matte / gloss hybrid finish! This unique combination makes your car, truck or SUV stand out from the crowd, whilst providing plenty of visible light transmission for your tail-lights to safely do their job. For style and practicality, VViViD Honeycomb Taillight Tint is a ‘clear’ winner!

Una luz trasera de automóvil envuelta en vinilo VViViD+ Honeycomb Taillight Air-Tint

Unique in the automotive industry, Honeycomb taillight tint is the first tint to combine gloss and matte textures into one finish. The gritty matte-finish hexagons blur the colors and contours beneath them, whilst the spaces between the hexagons are clear gloss, creating a stark contrast between muted colors and brightly saturated colors, overlaid with sharp, glowing highlights.

Una luz trasera de automóvil envuelta en vin­ilo VViViD+ Honeycomb Taillight Air-Tint

Durable and long-lasting, this wrap is as tough as it is beautiful, and won't fade, crack or peel, unlike other taillight tints. Installation is a breeze, thanks to VViViD's Air Tint air-release channels, so you can have it installed by a pro, or tackle it as a DIY project. The tint can be customized to fit any taillight, allowing you to create the perfect look for your vehicle. Best of all, wrapping your taillights is a highly affordable alternative to expensive custom paint jobs, or aftermarket light housings. Plus the vinyl provides protection for your taillights, keeping them safe from scratches, abrasions and the elements. So why hesitate? Transform your ride today, with VViViD Honeycomb Taillight Tint!


Clint Lewis
2025-08-21 18:40:56
This is a very good product for smoking taillights. I used it to smoke out the turn signals on the front and rear of the bmw. The best part about the film is that it barely dims the light but looks great. From my experience, it is very easy to work with and a little heat makes me feel like a pro.
Dylan Presley
2025-08-13 10:09:55
Easy to work with if you use heat and patience!
Scott Dau
2025-07-24 15:40:41
For the low price, this product is an A+. It looks really good when it's installed. I really like how the honeycomb looks and the mat surface.Now for the one bad thing. The listing (in the video), it says that this product is very "stretchable". Well, it isn't. Not as much as they claim it is. However, it does stretch a little. Then, as you stretch the vinyl to go around curved surfaces of the brake light, it will stretch to a point where the mat surface is now transparent (if you're looking directly at it). Basically, where it's supposed to be mat surface is now shiny surface. Now if you look at the side (off-set) from the stretch, then it becomes opaque again. Kind of like the privacy film for your phone. Look directly at it and you can see right in. Look at it from the side and it becomes dark.The good is that the adhesive is super-sticky. Like.... too darn sticky as you're trying to work on the applying the film. :) But that's a good thing. You don't want it to come apart after you smooth it out.Overall though, I would recommend it.
JL915
2025-07-18 12:17:53
 
iLr
2025-07-16 16:24:05
I used the vinyl wrap as a protective layer for my new gaming laptop, only the top. I wanted to prevent scratches and grease stains from fingers. Travel around the world so I put it in my bag a lot and other things are also in my bag that could scratch it. I didn't have to use a heat gun for my application but I did have to buy a surgical scalpel to more easily cut the lines as it is kind of thick.I can't see RGB light through it in the back of the laptop which is good for me. I didn't like it lighting up every room I bring out my laptop.
Customer
2025-07-15 18:28:48
So much easier than other brands
Josh Wesley
2025-06-08 17:47:18
This material can make almost anything look better..practice with something small and once you get the hang of the point this material stretches, then this can make anything look amazing. be sure to clean your surface with alcohol and use a heat gun that you can control the temperature this material has a sweet spot that it sticks to anything perfectly but if you get it too hot then you will have to just start over.
Don
2025-03-30 12:11:15
Not recomended
Christy
2025-03-25 10:24:53
It was super easy to apply; I bought it for my laptop to keep it from getting scratched. I have never applied vinyl wrap so I only had Youtube to guide me, it was super easy and honestly no more difficult than a phone screen. If you have various led lights you can see them through the vinyl which looks nice. Its held up to being taken in and out of a bag constantly so it is durable in that sense. I only used a hairdryer at the hottest setting to shrink it around the corners and that seemed to do fine. There is a lot of leftover vinyl so I might try to put some on my car's taillights, it feels unfair to review it on that basis since I know I'll make mistakes.
Eduardo Villarroel
2025-02-22 16:13:59
this gave my Laptop a create look. better than the carbon fiber look. Love it.... and no finger prints and some protection to you laptop ( unti-scratch )
Ruthless88
2025-02-02 17:05:01
Not a single complaint, I've used many different types and this was easiest by far to install. I'm not sure what I expected but I'm not happy with the color and style compared to previous ones I used
Mcgyvr
2025-01-18 10:28:44
and nicely made.
Sibalik
2025-01-17 11:11:54
The glue on the product is of the worst quality even after activating by heating. The vinyl came off within 5 days of installation.
Recommended Products

$9.99

$ 4 .99 $4.99

4.3
Select Option