Your cart is empty.
Your cart is empty.Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Steven Shaner
2025-08-14 17:43:53
Part was hard to find, it was delayed in shipment, but finally came. Got it put on and fits nicely.Thank you
Nomad Trucker
2025-08-01 11:49:53
Came quicker than a teenage boy, more quiet than my ex during sex. Perfect fit! No complaints, unlike my ex!
Bobby
2025-06-26 17:30:30
Works great
Customer
2025-05-23 18:39:07
Bolted right up to my 2006 double cab. Flanges and hangers lined up perfectly.
Beltway insider
2025-05-17 09:52:42
Fits pretty well and is quiet. The bit that Ts off to the drivers side was a 1/4†short and I had to pull a bit to get the bolts in but that maybe within tolerance.I had to cut the threaded bits off the cats as they were completely fused with the original bolts. I needed some M10x35mm bolts/nuts and used a regular washer and a spring washer on each bolt to assure it stays put.
mkjprice
2025-05-08 15:16:23
It does not come with the front O2 Sensor mount, it is shorter than needed, and the flanges are not clocked to match existing exhaust. We modified it and made it work, but it definitely was not a bolt in item. Seems decent quality though- bends could be smoother, definitely not mandrel bent
CBrew
2024-12-12 21:57:23
Fits like the original. Easy to install. I rented lift space at a DIY garage and my son and I did it together. Cake! It’s quiet too.
G2USNY
2024-12-07 14:16:46
If you live in the land of road salt, you will likely have to cut off the bolt heads/nuts that attach the two upstream flanges of this resonator to the downpipes/cats flanges on the 4.7L V8. I purchased a $15 angle grinder from Harbor Freight and a cut-off wheel to do the job. I then had to drill out the remaining body of the bolts. Overall, not a difficult job, just a little time consuming. The downstream connection slips over the pipe of the muffler/tailpipe assembly. There are two options for the clamp on this slip joint, the Wagner #36402 or the Bosal #255-1007 (both available from Amazon). The fit of the Bosal part is vastly superior and it's cheaper! I had replaced the muffler/tailpipe last year, so getting the slip joint apart was not an issue, but it could be problematic if yours is old and rusty.
Recommended Products
$161.66
$ 65 .99 $65.99