Your cart is empty.
Your cart is empty.Glove box holder black
Jack Ryan
2025-08-01 11:15:41
Nice little glove box holder. A little finicky to install but not difficult. Tape the schematic to the wall, level it. Drill the 4 holes, I used a 7/32 bit for the holes. They need to add the drill bit size to the directions. This holds medical glove box sizes, it is not meant for tissue boxes. It got the box off my workbench....now to organize of all the other stuff taking up room.
Rosey
2025-06-21 13:17:19
This works really well. I am currently using one for food grade gloves for cooking. I purchased another one like it for. kleenex!It was super easy to install.âï¸CONS:The screws are cheaply made almost plastic feel so they broke during installation. I had to use better ones that I had on hand.NOTE:This does not fit large Kleenex boxes. It must be the thinner type of Kleenex box in order to fit inside.
Tyrone T
2025-06-17 15:59:14
I installed this in my garage. I was always looking for my box of gloves and most often gave up. Now I know exactly where they are. This holder creates a clean look and keeps your surface area clear. It accommodates most standard box sizes. I plan to get another one to place masks in for the same reasons. This was super easy to install and came with the hardware I needed. The black color is sleek and does not stand out so it blends well on the wall. Definitely recommend for the garage dwellers and inside the home to keep gloves and masks easily available.
J
2025-06-07 10:48:24
We got this for our box of gloves we keep in the kitchen. I am a hibachi chef, and my wife is a nurse. So, we have multiple reasons for having one of these around our home. I have never liked handling raw meats and poultry at work or at home. You would think after over a decade of experience, I could do it, but I can't. I keep a box of gloves in the kitchen and it is always in my way on the counter. Another pet peeve of mine is I want open counters that are not cluttered up. So, my wife suggested that we get this holder and mount it on the wall. Perfection! It took minutes to mount on the wall and it fit the box of gloves perfectly. Highly recommend for anybody that uses disposable gloves. It looks good on the wall, it saves space and it makes you feel more organized. Try it!
Clarissa
2025-03-19 10:06:38
They market this as primarily a glove holder, which it does hold, but they also said tissue, which I think is misleading. They don't hold a standard size Kleenex/generic tissue box, so measure yours first. It does fit both the regular sized nitrile glove boxes and the beefier gloves (see my picture). To mount it I had to use my own screws because I was installing it on the back of a wood cabinet door. The screws it comes with are too long for a cabinet door, but good for a wall. Screwing in the top part was difficult because you can't do it straight, unless you had a screwdriver with a stub for a handle. I didn't have one short enough, so I had to go in at a slight angle.
Coffee_luv
2025-03-10 09:59:36
I'm not the best at putting things together or building things so this thing was annoying. The quality is fine and it includes all the pieces you need so I can't give it a bad review. I just hated that it came in pieces and I had to make sure it fit. I live in an apartment so I couldn't put holes in my walls but I was able to use velcro stickers and it has been holding up for almost two months. I wish it came with an adhesive option or even if it was magnetic. For the price I understand what you get. Now I'm not constantly dropping my box of gloves and putting it in different places where it gets lost.
Rich Braedt
2025-03-06 20:32:25
The media could not be loaded.
FB
2025-01-15 10:20:51
Wall Mount Glove Box Dispenser: Black Holder for Disposable Gloves & Tissues - Organize in Lab, Kitchen, Bathroom, GarageThis would have been so easy to hang on the wall if it didn’t come in 4 separate sections! I kept wanting to just tack weld the whole assembly together as it should have been at the factory, then drill four holes in the wall and hang it. Instead, I had to follow the instructions by taping the included hole pattern template to my wall and then drilling for (2) plastic anchors. No info is given in the instructions about what drill size to use. (I used an 11/64th drill bit) Because the other (2) holes would be into the wood frame behind the drywall I had to use my own screws (none provided for mounting into the wood framing behind my drywall) I’m embarrassed to admit it took me about 45 minutes to complete my task of mounting this, but I blame it on the frame being designed in 4 sections so it would fit in a small flat box for overseas shipping. It works just fine and it looks great once I got it on my shop wall and I have no complaints other than the installation process. I would hate to order several of these for a Lab or something and have to mount them all. I would suggest that the manufacturer fabricate this in one piece and use a bigger box to ship it. If it was made that way I would have been 5 stars instead of the 2 stars I gave it.
Recommended Products
