Your cart is empty.
Your cart is empty. Important Note
A separate 24VDC/1A power adapter is required to be used with the lock when you use the lock with a liftmaster 24VDC swing gate opener!
Not suitable for glass door!
You can attach the lock to the power supply directly without the access controller or gate opener controller to check if the lock works when trouble shooting!
1.Product Description:
The Mageway 12VDC 24VDC universal fail safe magnetic door lock is ideal for outdoor use because of the waterproof design.
It can be installed to almost all kinds of doors & gates easily with the Z&L brackets which include in the kit.
It can keep your door or gate securely with up to 1200 pounds of holding force closed until you release the powerful magnet manually through your hardwired access control security system or via remote control of your gate opener.
You can send us an Amazon message anytime if you have any question about the product!
Important Note: Controller and Power supply are not included in the kit.
2.Specifications:
Holding force: 1200lbs(550kgs)
Input Voltage: 12VDC or 24VDC
Current: 500mA for 12VDC, 250mA for 24VDC
Working temperature: -20 to 55 Celsius degree(-4 to 122 Fahrenheit degree)
Humidity: 0 to 95%
Working mode: power-on to lock, power-off to unlock
3.Contents:
1 x Magnetic Door Lock;
1 x Z and L Brackets;
1 x 12VDC SPDT relay;
1 x 24VDC SPDT relay;
1 x User Manual;
1 Set of Installation Accessories;
Chelsea
2025-08-31 10:12:55
I am amazed at the fit and finish of this lock. I bought it for a 10 ft. Swing gate using it with a Liftmaster LA500. The anodized finish is great and the brackets are exactly what I needed. The Liftmaster is set up to work with mag locks so the installation came out clean and works perfectly. So happy with this purchase. Tip: leave the “armature “ (the metal plate that sticks to the maglock) slightly loose and lock the threads with blue locktite. The armature needs to be slightly loose and locks up tight with the magnet side one it’s energized.
Sylvia M Ware
2025-08-26 18:09:50
Using mag lock to hold dual swing iron gates. For the price, hard to find a 1200lb holding mag lock that includes mounting brackets and relays for both 12vdc and 24vdc systems.As other reviews mention, instructions could be better. If you have never worked with a mag lock, you will need to play with it some before installing. I agree with another review about screws, not the greatest, use your own. I was able to pick up what I needed for less than $2 at a local bolt store. I went with stainless steal Flat Head Socket Cap Countersunk Bolts and tapped the holes, holds great! The hole on side of lock for wires could have been sealed but I did it myself with a little silicone to prevent water penetration.Also installed a Topens dual swing gate opener. I emailed mag lock vendor for instructions to wire lock to gate opener (Topens, A8132) and within 24hrs received response with a wiring diagram that was easy to follow and worked without issues.For a DIY project and home use, the pros far outweigh the cons. Can’t beat the price, product and vendor. As of now it’s working great. Installed 11/24 so time will tell if any issues but I will update review if so.Over all - 5 stars.
Eddy amazon
2025-07-13 11:10:19
I just completed the installation of this “Waterproof 12VDC 24 VDC Heavy Duty Magnetic Door Gate Lock 1200lbsâ€. So far, a great product so tested trying to push the gate open and it holds perfect, I email customer service to inquire and they reply within few hours, great experience.I installed the Magnetic lock on my electric single swing gate power by Topens Model A/3.For this application you got to make you use the 24v relay (included in the package)The instructions were easy to follow as far as connecting the wires from the magnetic lock to the relay, but when connecting the wires from the relay to the gate opener control board things got complicated as the instructions did not allow the magnetic lock to release.The instructions asked to connect the relay wires to the +- Lock. But that didn’t work.So I did some research and found out as alternative when the (+-lock) doesn't work.........Here's what you do.You take the yellow and white wire from the relay and connected like this;Yellow wire to space #1 (+24)White wire to space #3 (GND)The magnetic lock will engage when the gate is close and it will output / release when the gate is activated to open/close motion.I also added a weather-box + cord wrap protector + apply some caulking for the connections to protect the wires from the rain and sun.Now when I use the Topens remote control to open the gate it unlocks the magnetic gate and it works amazingly.
Dhruv Patel
2025-05-12 10:03:15
I installed first time and I choose right product I recommend this is a right electric magnetic lock value for money 💰
North Texas RN
2025-05-09 18:47:25
Note: I am a homeowner, use at your own risk. But this is the solution that I used. For Liftmaster Only.This assumes you have installed the lock to the gate and are ready to power it up.If you're hooking this to a liftmaster gate controller, let me save you a day of frustration. First off great magnet. But the instructions are terrible.Here is the solution: You'll need however many feet you require of 2 strand low-voltage wire. I used 4 wire telephone wire.On the magnet:1. Tie blue and white together and tape them up. You are left with black and red.2. Tie Red to one strand of your low-voltage wire to one.3. Black to another.(Note color if also not red and black.)At the control box:(Toss those relays to the side, unneeded)1. You will need a 4" single wire jumper wire. Cut and strip ¼" of insulator on each end.2. Jump the Acessory Power (-) the COM position of the "Lock" contacts on control board. It helps to take the block off the control board. Reinstall when done.3. Take your Red wire and put on Acessory Power (+)4. Black wire to NC (normally closed) of the "Lock" contacts, right above the COM wire.That's it. Your done. Test your lock, and adjust your gate stops as needed. Cycle the gate a few times so it learns pressures.
Edwin Karapetian
2025-04-08 11:13:48
The best magnet on the market worth every penny very high-quality not complicated
Delwyn S.
2025-03-05 10:17:27
The media could not be loaded.
Brian B
2025-02-06 16:06:45
The magnet is strong when activated. The wires are quite short and need extensions for any application. Not suitable for mounting on the end of a gate or light door as it is way too heavy. But good if the heavy part of the two pieces is permanently mounted to the wall.
Recommended Products
$226.95
$ 99 .00 $99.00