Your cart is empty.
Your cart is empty. Upgrade your Power Rack with additional storage for your weights.
With this simple design it is possible to offer an very affordabel weight plate holder. Easly screwed to your rack and the can load with plates to storage.
Features and Advantages
- fits for 2 inch x 2 inch - 3x3 - 3x2 - 2 3/8x2 3/8racks with 1 inch hole diameter in rack
- Pin diameter fits perfect for 2 inch weight plates
- length is 11,41 Inch / 29 cm and provides a lot space for your plates
- space and stability for 5 plates with total 275 lbs on the holder
- M24 Screw with 1 Inch diameter included
- Material is steel so stability is very high
- also possible to use as squat safety bar
- pins will screwed solid to rack with no gap sliding of the plates
- save your space on the floor with adding this holder to your cage
- perfect for storing your weigth plates
- desigend for stability and durability
- more stability then J Hook weight holders
- Patented Design
Scope of Delivery
- 2 x Weight Plates Holder
- 2 x M24 0,94 Inch Screw with 110mm / 4,33 inch length + Washer
- 2 x spring collars
Frederick K.
2025-08-29 10:07:03
Strong and sturdy. A couple insignificant inconstancies in the construction of these but other than that they work great and are easy to install
J. Taylor
2025-07-29 11:34:33
I couldn’t find any plate holder attachments for my 3x3 cage. I found these and they’re amazing. A bit pricey for two of them, but they’re extremely sturdy and fit the 3x3 holes perfectly and can hold up to 275 lbs. I have my 25, 35, and 45 plates on one (in pic) and they haven’t budged. Super easy to install.
Angela M. Henshall
2025-06-19 10:45:03
Solid. My rack is 2.5†with 1†holes. Standard attachments do not fit. This fits the 1†hole without having to take the rack width into account.
Matthew Thompson
2025-05-29 18:14:13
At half the price of the cheapest "name brand" utility pin these are exactly what you'd expect. They're very serviceable. They'll work fine for light duty but don't expect them to last forever.They are built as cheaply as possible to get the job done. The build quality in them is extremely low. The hardware provided is some of the worst I've ever seen. As you can see in the attached picture. One of the pins didn't even have the attachment point close to center therefore the pin wouldn't attach perpendicular to the rack but i still got it to work. These are not high quality pieces but they're all doing their job for now at least.These pins could work great for you IF you set your expectations properly. Install them and don't plan to ever change their position; i do not expect the hardware to hold up multiple installations. They also will likely not last as long as your power rack. if/when mine fall i will post an update.The bottom line is that these are some of the cheapest pins you can buy so don't expect too much, but as a light duty storage solution they should work fine.
Edward Maich
2025-05-06 17:48:29
Overall I think their great, does it’s job by keeping my weights organized. Great product for the price but has some flaws. I have 3x3 uprights with 1 inch holes and they bolts are a little wiggly, they don’t move much when you tighten them. The bolts were not all the same size. The smaller ones still screwed in but I wouldn’t feel safe putting anywhere near the weight that they should be able to hold. Also, the powder coat is very thin and crutches easy. As soon as I put my bumper plate on I noticed they got scratched. Not a huge deal, you get what you pay for. Lastly, they come with one washer and should definitely come with two in order to protect your equipment. I went and bought some for a few bucks so it wasn’t that big of a deal.
Chris Krauss
2025-04-05 18:12:47
Great plate holders! I purchased these to add plate storage on my rack. They are extremely well designed, and install at an angle so you don't have to worry about gravity or motion wiggling the plates off. It also came with two barbell clips as well!I would highly recommend these to anyone looking for plate holders who are worried about floor space
Manuel Salazar Jr
2025-03-27 15:36:54
I added these to my beautiful new home gym that I built. I was excited that I spent the extra money on Rogue everything! It is such a beautiful set up that I get inspired every time I walk into my garage. When I was looking to add "pins," I went to the Rogue website (because, you know, Rogue everything), I saw the price tag and thought, "There must be a less expensive option." I came across these, added them to my rack and couldn't be happier with the purchase. AND I saved a bunch of money!
Vincentus Tukas
2025-03-16 13:02:45
Works great for my hundred pound plates. Need them so I could add weight to my rack for power speed attachments so the rack doesn't move.The bolts are long so they will hold a lot. My 100lb plates are thick and I can get 3 on one.
Robert M.
2025-02-14 20:46:31
Die Halterungen sind einfach an ein Powerrack anzuschrauben und eignen sich gut für die Aufnahme von 50 mm Olympiascheiben.
hoangvanhiep
2025-01-24 10:39:40
Diameter nur 47,3 mm, allgemeine Verschlüsse aller Art passen NICHT !
Recommended Products
$66.99
$ 27 .99 $27.99
$31.64
$ 15 .99 $15.99