Your cart is empty.
Your cart is empty.Product Description
Rayzeek Wireless Motion Sensor and Controller Receiver Kit（1+2）
Do you want to place the sensor wherever you want instead of being fixed where there is a plug?
Do you want to get rid of the traditional sensor and adjust the delay time without using screws?
Rayzeek Wireless Motion Sensor and Controllers-Receiver Kit can widely used to control a DC 12~24V load, Led lights, Led strip lights, Other devices that require automatic illumination or alarm functions.
You can easily control your life needs with the touch of a button, place any location you need for sensor control, create ambiance and light up your life.
A complete Kit:
- 2x Motion sensor(RZ016W)
- 1x Controller-Receiver(RZ016A)
- 4x Screws
- 3x Double Sided Tape
RZ016A Contoller-Receiver
- Input Voltage:DC 12~24V
- Output Voltage: Equal to input voltage
- Load Current: ≤5A
- Static Power: ≤10uA
- Mode: Auto/ON/OFF
- Time Delay: 15s.30s. 60s.180s. 300s. 900s. Adjustable
- Light Level: 20%~ 100% Adjustable
RZ016W Motion Sensor-Emitter
- Input Voltage: 2pcs AAA batteries powered(Not include)
- Output Voltage: Equal to input voltage
- Mode: 1. Sensor ON/OFF 2. Light Sensor ON(≤35Lux)/OFF
- Detect range: 5~8 Meters
- Wireless transmission range: 7-20 Meters (7M when batteries voltage is lower than 2.5V)
Maged
August 29, 2025
Very good product
FJ
July 28, 2025
Found the item as a review of another product. Works great for stair led motion sensing lights. Set and forget type device.
SM
July 19, 2025
I was trying to find a motion activated solution for my stairs, and everything I found was using a smart home hub with smart sensors and proprietary leds. till I found this!!! No need for any smart home ecosystem, it just wrks with any LED strip you like, and the options are pretty nice, of course they're less programmable, but it's pretty much all you need. Can't believe how much money (and Time) I saved!
Miked9746
March 24, 2025
First, I will say that these work. They reliably turn on the LED strip that I have them connected to. The sensors & controller are sufficiently small to be placed out of the way and to be barely noticeable. Having said that, there are a few issues to be aware of. First, the controller has a 5.5mm DC jack that connects it to your 12v power supply (typical), but then it comes with a 2.5mm DC jack to connect to whatever you're trying to turn on/off. This makes it extremely limited in what you can plug it into unless you plan to buy the appropriate adapter separately. I was able to disassemble the controller and solder in my own compatible connector, and voila... it attaches to my led strip just fine now.Secondly, the instructions for the sensors don't tell you a thing about what the leds are doing/should be doing for different settings! I have no idea if the light sensor is on or off when I press/hold the button. The leds flash a few times when changing the settings, and it's impossible to tell which is which without knowing what the different number and/or color of flashes mean (there's a red led and an orange led in each sensor)! It should be possible to gradually figure out through trial & error, but it definitely shouldn't come that way!Third, the light sensitivity on these are almost non-existent! If the sensor is on (stopping motion triggers during daylight hours), it has to be extremely bright, intense light for it to work properly! I've tried it in full sun and under an extremely bright led and it was still able to trigger the motion sensor! As I mentioned before, you can toggle the on/off setting for the light sensor, but you'll still have no idea which setting it's on because it triggers while in both! The sensors use a phototransistor in the circuit, but then they cover the sensor with the PIR lens and a tightly closed case, meaning almost NO LIGHT can get it to the light sensor! I think a photo diode placed closer to an opening may have been a better option. Lastly, these are crazy expensive for what you get! While they do look nice/professional, the same thing could be made yourself if you are so technically inclined! If I were to need these again for some reason, I probably would look for a different product.
P. M.
February 25, 2025
I used this as part of a led strip lighting solution for underneath the kitchen cabinets. This works perfectly, because now when somebody walks into the kitchen the lights go on on their own and the biggest winner is - no wires for the sensors!
Rudy K.
February 13, 2025
the new replacement of this sensor works well although the on/off lux setting does not accommodate all possible light situations. Also, the interface timer that plugs into the DC power supply seems to draw quite a bit of power that becomes apparenbt if you operate sensitive step motors. I would rathger sacrifice the dimming option for the direct current flow thru, hence 1 star down. .....As other customers observed, the sensor is incredibly unreliable and the interface of turning the control on/off are unctious and abstruse .... however , as there is not an other turnkey sensor of that sort on the market i am buying another, one hoping that it will work better. If it does , I will return the other one.....
Lyndsey E.
January 14, 2025
I was looking for something to make the LED light rope I have on my stairs motion activated, and this worked perfectly. My stairs have a landing in the middle and wrap around so I needed two sensors, one at the top and one at the bottom to work the lights. This plugged in and worked right away. Highly recommend.
Terence
January 2, 2025
I have three of these products and they work really well
BBQ boy
December 3, 2024
the module is much smaller than expected, very easy to program and change settings
sam
November 23, 2024
The media could not be loaded.
Recommended Products