Your cart is empty.
Your cart is empty.Product Description
Temperature Data Loggers is used to record the temperature of food, pharmaceuticals and chemicals, etc. The data logger is widely applicable to each link in storage and logistics of cold chain, such as refrigerated container, refrigerator truck, cooler bag, cooler cabinet,medicine cabinet, cold storage, laboratory, etc. And the usb single-use data logger is with very cost-effective design and simple to operate, smart size minimize the space occupation. The monitor data can be directly read PDF format by PC at destination.
Use to refrigerated container
Use to refrigerated container.
Use to Cold-storage
Use to Fruit storage or transportation.
Use to SeaFood
It is widely used for seafood storage and transportation.
Use to Shipment
Use to transportation.
Note:
1.Make sure the data logger has been started before place it into the environment to use.
2.Don’t place the data logger directly into the corrosive liquid.
3.Please do not operate our data logger under the bright light, because under the bright light, LED flashing will be difficult to be observed
4.Please no direct heating or micro-wave heating or charge the battery.
5.Please recycle or dispose the data logger in accordance with local laws and regulations.
Before start, press button and hold more than 3s.OK light bright for 3s.Start data logger.
After start, press button and hold more than 3s.ALARM light bright for 3s.Stop data logger.
Single-use PDF Temperature Data Logger (TH01) is one kind of cold chain data logger. It is mainly used for temperature recording during storage and transportation of foodstuff, medicine, chemicals and other products. After record finishing, it can be inserted to computer’s USB port and get PDF report directly.
Tear or cut off the plastic bag and insert the logger into an available USB port on a PC. “OK” light and “ALARM” light will flash in turn when a PDF report is generating. When the PDF report has been generated, the “OK” light will brighten until pulling out from the USB port. (Note: If the logger is stopped during the status of start delay, there will be a PDF report but no data.)
j.m.
2025-01-09 16:14:55
There needs to be a better explanation of what "ALARM" means. If you look through the product info thoroughly enough you will find the alarm range of ＜2℃ or ＞8℃ (＜35.6℉ or ＞46.4℉). If the temperature exceeds those limits the ALARM led will flash but the device is still recording.In regard to the temperature range I would prefer it if it was ＜0℃ or ＞4.5℃ (＜32℉ or ＞40℉).I like that it seems to have an onboard clock/calendar And it's set for UTC. The best way to use this device is to note the date and local time when you started the recording. According to the instructions the device will start recording 30 minutes after you started it.Then you'll need to know your offset from UTC and that can be applied to the time entries.The PDF that is created by the device is easy to understand. I only wish they would export the table as a CSV file in addition to the PDF. That would make life much easier! But you can select/copy the table entries and paste them into a text file. From there the data can be changed to a CSV format and saved. It's a tedious PIA but it can be done.The graph is very helpful. I only wish it would be rendered in landscape on its own page. That would provide a lot more room for the graph making it easier to see the fine changes.
Recommended Products