Your cart is empty.
Your cart is empty.Product Description
This wet dry vacuum hose features Dual-Flex™ technology that resists crimping and collapsing, and adds 180-degree flexibility at both shop vacuum hose ends. The locking tab won't pull loose during use, but easily attaches unlike many shop vacuum hoses. The 2-1/2-inch diameter allows for large debris collection and maximum airflow. This wet dry vac hose works with 2-1/2-inch shop vacuum accessories, and fits most shop vacuums with the standard 2-1/2-inch inlet port opening including most WORKSHOP Wet/Dry Vacs.
From the Manufacturer
The WORKSHOP 2-1/2" standard hose features Dual-Flex technology that resists crimping and collapsing, and adds 180Degree flexibility at both hose ends for enhanced maneuverability. The locking tab won't pull loose during use, and the 2-1/2" diameter allows for larger sized debris collection and maximum airflow.
Kenneth Lee
2025-08-17 16:05:43
I bought the Dewalt dust separator, you can connect it with 2.5 inch hoses. So I bought this hose to hook it up, it has a few different fittings with it, and it fits perfectly. It is high-quality hose that I am confident will last for many years. It came with more fittings than I need, but I’ll just put those in a drawer somewhere and who knows, maybe I will use them one day. This is good quality hose at a good price.
NuclearCryptoHardwareGeek
2025-08-05 10:34:11
is anything quite so frustrating as a lack of actual dimensions? For instance, the manufacturer calls this a 2-1/2 inch hose, but there is NO PART of it that actually measures 2.50". Maybe that's an industry "nominal" size (like "two by four" or "half-inch pipe"), but it's useless when you're trying to figure out if it's compatible with your equipment. I hope the following information helps.The hose is corrugated, about 1.96" ID and 2.33" OD except at the ends, where it's made larger to match the barbed press-in adaptors. Four adaptors are included: Two identical plain adaptors, one of which is pre-installed into the hose, and two others with latches (one red, one black).The non-barbed end of the plain adaptor has a mating area 1.85" long, tapering from 2.28" to 2.26" OD. The ID is 2.09".The mating area of the black-latch adaptor is 1.33" long, tapering from 2.29" to 2.27" OD. The ID is 2.15".The mating area of the red-latch adaptor is 1.0" long with 2.63" OD molded rings and 2.29" ID.The good news for me is that the plain adaptor is a perfect fit in the suction port of my Fein Turbo II dust collector. There's no twist-lock feature as with the Fein OEM hose, but the friction fit is plenty secure. I installed the second plain adaptor on the other hose end, and it's a light friction fit in the outlet of my ancient Ryobi BT3000 table saw.I also noted that the black-latch adaptor fits my Ryobi P770 6-gallon portable vacuum, and it's actually far more secure than the OEM hose. However, having already pressed in the plain adaptor, I consider it to be non-removable because the barbs are such a tight fit in the hose. I'd guess I'd have to buy a second hose for this purpose.
Eduardo Montoya
2025-07-31 10:35:19
Bueno para mi aspiradora
JB
2025-07-19 18:57:42
Just what I needed to continue using my 20-year-old 5HP Rigid shop vac after the OG hoses had worn out! Not impressed with the flimsy feel and design (H/W/L/HP)) of newer shop vacs vs. my old beefy dinosaur so these new parts will let me continue to save a money and get the jobs done.
vk
2025-06-05 10:41:34
The hose is the standard diameter and a good length but this is not a generic hose. It has fittings on the end to adapt to various vacuums but if yours are damaged or missing you're out of luck unless the 3 types included match yours. I used an included adapter plus my original Shop Vac vacuum hose connector and it worked fine. It's a good heavy duty hose.
tony
2025-05-19 20:28:03
Seems pretty darn close to original. Works well
G. E. Kooken
2025-04-24 11:19:55
right size and works
Sphynx. Paws
2025-03-17 12:53:15
It fits our older shop vac. Accidentally threw the hose attachment when our house was ruined and needed replaced. So happy this worked. Hose is very heavy-duty so worth buying with hose and extras then the separate peice.
Jason Hewlett
2025-03-15 18:10:15
The you have a lot of wood chips coming fast the big hose works very well comes with a few ends seems to fit all the tools I have. still use a little duck tape just to make sure it stays on.
Scantland Andre
2025-03-10 13:33:46
I have an old Dirt Hound 16 gallons Wet-Dry vacuum bought in 2007. My hose had to be replaced. I tried the hose from Emerson Vacuum since it looked the same. Guess What, it does !!! Dirt Hound part number was HT2520 and Emerson part number is WS-25020 so basicaly the same. Thanks to Emerson for keeping the same hose standard than their predecessor. Two thumbs up
nadia
2025-02-13 18:59:21
Best deal I found at the time I bought it. It is perfect!! No issues at all!
T-Dog
2025-01-24 16:41:47
Great replacement for my damaged original hose.
Kuroshi
2025-01-23 09:50:07
It fits perfectly on my Stanley shop vac and CNC dust shoe. The head without the clips fit well, but I went with the one with the black clip, just in case it wants to rotate. Note that the clip will fit into the slot but it won't lock.Picture 5: Workshop left hose, Stanley right hose for comparison (Stanley clip lock upwards which is why the Workshop one won't lock but it is snug enough)
Recommended Products
