Your cart is empty.
Your cart is empty.Custom Made - 4 Units - 6 Inch - Canare 4S11 - Audiophile Grade - 11AWG - HiFi Speaker Jumper Cable, terminated with Eminence 24k Gold dual-plated, low-profile audiophile banana to Eminence E900 multi-spade connectors (2x Black & 2x Red). Each Jumper consists of two (2), 14 AWG conductors (11 AWG per Jumper when paired as in this cable assembly). Please refer to detailed images in this listing for cable wiring information and further details on the cable and connectors (Length measurement, etc.).
J. Campbell
2025-08-06 11:57:55
This is a quality product from a Japanese company. I've not heard of them before but the price was right as I didn't need to break the bank on simple cables.As soon as I opened the box you can tell they take pride in their product. Everything was wrapped in static-free plastic and came in a nice box with inserts about the company and some of their other products. The cables themselves are perfect and exactly what I needed! These cables are replacing the terrible metal crossovers that came with the speakers. One end of the cable has a banana plug that slides into the unused post and the other end has a typical open ended clamp that gets secured to the main binding post by the black and red screws. It took all of 5 minutes to ramp up the sound.I can definitely hear an improvement in my sound too. I just so happen to be listening to U2's Zooropa album on vinyl and during the song Numb, the vocals were way to mushy and overpowered by the droning electric guitars. After installation of these cables I could hear The Edge's voice much more clearly! All around, I'd say these cables have improved the midrange as far as sound, allowing the lows to be output more selectively to the woofer and the highs and mids get a big boost doing this.All in all, I am very happy with this purchase and will absolutely keep this company in mind should the need for any more cables arise. I can absolutely recommend this product and this company to you. I do hope this review was useful to you. Cheers!
SHR
2025-07-14 10:31:59
In the past I have had jumpers that have a retail cost of over $350. These are $25 and just as good, if not better. They did help the sound from my bi-wire capable speakers. See, most speakers that have dual binding posts have cheap metal or plated metal between them to act as a "jumper". These poor quality metal pieces usually add a slight tinny sound, metallic sound, or a more edgy upper end to the speakers.I refused to buy the fancy $300 jumpers so decided to try these for my new Klipsch Heresy IV's. I noticed at times a slight metallic edge to the upper frequencies. Now, I have been an audiophile for 25 years and have had more audio equipment that I like. to talk about. With that said these jumpers, for $25, made a pretty nice audible improvement to these Klipsch speakers. NO more metallic edge, no more edge at all. The sound smoothed out in the high frequencies and even the bass sounds a but deeper and more pronounced. This is what happens when you use a hacker gauge wire over cheap metallic plates for jumpers. Your sound will sound more cohesive and together. It's slight, do not get me wrong, but depending on your system and how resolving it is these will either bring a dramatic difference or none at all. For me, my soundstage grew wider, the top end just sounded so smooth and silky and the bass improved. All from a $25 set of cables. These cables are well made, and a bargain for the price. Not everyone needs these but they can truly help for some systems. Well worth the $25 and seems to have more impact than my old $300 jumpers ; )
Bryan Su Yew Tuang
2025-06-24 14:03:57
I am using Denon x6500 connecting emotiva xpa5 amp through blue jeans ten white cable to my klipsch rp280f speaker . After using purely this jumper cable, I realise the high frequency output more detail from my tweeter. It’s not significant but noticeable when pay very close attention to it. Vocal has more high frequency sounding too. But some how the vocal (the mid range part like voice) a bit laid back and not giving wide sound stage as my original klipsch jumper. I tried many round changing in and out and found the same result. And tried with many song too. But again, it’s not significant different. Maybe 3~5% different if to put into number to give u a bit of how big is the significant. So I decided to put klipsch jumper and this jumper together to get the best of both. It sound stupid but I think it’s working. Vocal is coming back more open and high frequency part is better too. But don’t expect this will be giving you 100% improvements. I am using this purely to play around with audio and experience the differences that so many ppl claim have big improvement. I will try it with different speaker set and gear soon...Another things is that the entire jumper is heavy than those cheap one and looks like quality one.
Brett A.
2025-05-09 19:07:55
You can upgrade binding post jumpers just by using good quality copper wire and from my experience, doing so works rather well. However, there is something to be said when using very high-quality connections and the best wire available. The sound difference is subtle, but it is there. The quality and craftsmanship is outstanding, well worth the price in my opinion. I considered making my own jumpers like these but by the time all the parts were bought, I could just spend less and get the World's Best Cables instead. Very happy with them, highly recommended.
granger
2025-03-18 15:17:50
I used it to replace those binding plates on a pair of bi-wirable speakers. I didn't do an A/B comparison, but I do think the upper end is more present/vivid as a result.
Customer
2025-03-05 19:51:35
Used to replace the straps on Forte IV. Outstanding value, build quality and sound.
Edward Brumbaugh
2025-03-01 10:21:25
Very good quality construction and materials. I added these to my bi-wire capable speakers. These bridges / jumpers are a huge improvement over the OEM provided metal, or lower gauge wire they use to bridge the lower speaker terminals to the upper speaker terminals. Definitely provides a better signal path to the upper terminals.High recommended.
Nick
2025-02-09 17:17:11
Recently purchased Canare 4S11 Audiophile Grade Hi-Fi Speaker Cable Jumper cables as an experiment. I wasn’t convinced these cables would make any difference in sound quality but I was willing to try them out. My fist impression about the cables was good. The cables were well built, better than I had anticipated . So, I decided to install them to determine if I could notice any difference in sound quality. To my surprise, I noticed right away the base was clearer and deeper sounding, the mid’s seem clearer and the treble was smoother. How can this be, I never really thought a jumper cable would make such an improvement. What I believe is going on is the jumper cable makes such a tight positive connection to the speaker posts it really does improve the sound quality compared to the original gold plated thin looking bracket that came with the speakers. I am happy with the newly installed cables and recommend them to anyone who wants to make a small tweak to their audio sound for a small cost. I did not check the original bracket to ensure good contact was made with the speaker posts before changing them out. Either way, I’m keeping the jumpers cables installed.
Raymond W.
2025-02-06 13:50:36
The information provided on how the cables are being made. The careful and detailed professional packaging plus the made quality of these cables and contacts, all speak of top quality and seriously, worthy to carry the name of WBC - World Best Cables. Sound stage, depth, clarity, accuracy of sound, MUSICALITY, all improved by 10% to 30%. The sounds from my 27 year old floor standing Paradigm Reference Series speakers made me smile and be thankful for such improvements! Good product, delivery. Highly recommended.Setup:1) Native Instruments Traktor Audio 6 - at 48kHz2) Traktor Audio 6 to McIntosh pre-amplifier C712using two different types of cables (switchable)- Silverlink Mono Crystal Balanced Reference interconnect cables RCA- Audioquest Evergreen RCA interconnect cables.3) McIntosh power amplifer MC7100 (later model with on/off switch) connected to pre-amplifier via Silverlink Crystal 800 RCA interconnects4) Power amp to Speakers (Paradigm Studio Reference Series 60 V4) - Silverlink SC500 Musical Dynamic Speaker Cables
mark laframboise
2025-01-08 17:32:09
Used the jumpers in my speakers. Sounded good and well priced
Recommended Products
