Your cart is empty.
Your cart is empty.
Tips:
1. Easy replacement for a not so well designed windshield washer system, saved removing the wiper arms and a full plastic part.
2. Don't forget to adjust the nozzles until it provides a spray across the entire windshield.
3. Less expensive than the OEM part.
Note:
Installation time is less than 1 minute. No tools required.
Delivered on time by a very courteous driver
July 26, 2025
I installed these today they are awesome.The spray pattern is outstanding it covers three quarters of the windshield. Like night and day compared to the factory model.
Strohmian
July 20, 2025
I recently took on the task of replacing the windshield washer nozzles on my Sprinter-based RV. The previous owner had used a ziptie to attach a broken nozzle to the wiper arm, which, as you can imagine, didn't quite cut it and sprayed all over the roof. I was a bit apprehensive about the "nozzle orientation" process after reading various comments, but to my relief, it turned out to be a surprisingly trivial task.The installation was straightforward: I simply removed the broken nozzle from the wiper arm (that was the hardest part actually), attached the new one, and aimed the sprayers in the general direction of the windshield. To my delight, the first test yielded a perfect wipe. It's not every day that you encounter an RV project that's cheap, easy, fast, and successful (ask me about my generator I dare you), but this was definitely one of those occasions.The only slight downside I noticed was that the new nozzles don't grip the wiper strut with the same tenacity as the original Mercedes nozzles did. However, this doesn't seem to posed any real issue. The nozzles stay in place and do their job effectively, which is what matters most.Overall, I'm quite pleased with the result. If you're in need of a quick fix for your Sprinter windshield wipers and want to avoid a complicated installation process, these washer nozzles are definitely worth trying.
Han Shopped First
July 11, 2025
The Xislet Upgraded 2 Pack Aimable Brass Windshield Washer Wiper Arm Nozzles are a game-changer for my 2018 Mercedes Sprinter Van! These nozzles deliver a superior spray compared to the factory versions and are adjustable to ensure a perfect clean every time.The upgrade is noticeable — they’re more robust, and the precision is spot on. If you’re looking to improve your windshield washing experience, these brass nozzles are definitely worth it. Your van will thank you!
RJL
July 3, 2025
These brass nozzles are a perfect upgrade from fixed nozzles, offering much more flexibility. However, getting the adjustable nozzles aimed just right can be a bit tricky at first. Be prepared to use a lot of washer fluid while fine-tuning, so it's a good idea to fill up with water for the adjustment process. Once set, they work great and are a solid upgrade!
David ploskonka
June 27, 2025
Works as advertised
Lunica
June 9, 2025
The stem is thicker than the stem of the original sprayer nozzle on my Sprinter. It’s possible to wiggle it on the hose, but I thought the hose may sooner or later break. The one I tested, barely any water came out, like it was clogged. There were 3 in the pack, but I didn’t test the other 2 as I decided to order the OEM nozzle which includes a new hose, part 000 860 45 47, cost is between $13-16 for one.
Grimdiver
May 22, 2025
If you have this style of windshield washer, this is an answer that works. They are easy to install and easy to adjust the stream to actually put the water on the windshield. Small but great solution!
esmir
April 2, 2025
Had them for about a month and they got so lose falling of and popping out of the cable had to reinstall OEM back on I would give this product 0 but it's not possible absolutely do not recommend
Adam crain
March 29, 2025
Looked to find these exact ones for awhile, they fit perfectly
Adam N.
March 5, 2025
These fit and work, but are super hard to aim properly. You will have to fiddle around for quite some time to get them to shoot evenly
mikey
February 18, 2025
Ordered these as pictured, but the product that came was just platic part with a hole drilled fir nozzle. No metal adjustable nozzles were on the product.
RM
January 10, 2025
These nozzles are ok but they slide around a lot. The plastic could be a little better fitted for the application. The aim ability is a bit of a gimmick as there is very little movement.
Customer
December 24, 2024
Spray perfectly because of the adjustment of nozzles. The clips won't stay tight on the arms and went loose immediately. I used some 2 way tape and a couple of zip ties to secure them. We'll see how long this works.
Recommended Products
