Your cart is empty.
Your cart is empty.
Application of thrust ball bearing: it is only suitable for the machine parts with low speed and bearing axial load, such as crane hook, vertical pump, vertical centrifuge, jack, low speed reducer, etc.The shaft ring, seat ring and rolling body of the bearing are separated and can be separately assembled and disassembled.
The universal ball bearing is great for you to replace damaged ball bearings to improve efficiency and save energy.
Dennis B
July 3, 2025
These are good thrust bearings. Note that the bearing halfs are slightly different than the 5/8†size by a few thousandths of an inch.
Mogcre
March 14, 2025
The I.D is 15mm on one of the races. I had to grind it a little to fit. The second is 16mm as described. Would have been 5 star if not for needing to grind out. Bearing runs smoothly.
Ross Troiano
February 27, 2025
I ended up buying better bearing, these did not work well
BobLap
February 18, 2025
Decent, cheap thrust bearings. Only thing, they are three separate parts, others that I’ve used are held together so they are one unit.
Dennis B
January 14, 2025
These are good thrust bearings. Note that the bearing halfs are slightly different than the 5/8†size by a few thousandths of an inch.
Mogcre
January 7, 2025
The I.D is 15mm on one of the races. I had to grind it a little to fit. The second is 16mm as described. Would have been 5 star if not for needing to grind out. Bearing runs smoothly.
Ross Troiano
December 20, 2024
I ended up buying better bearing, these did not work well
BobLap
November 24, 2024
Decent, cheap thrust bearings. Only thing, they are three separate parts, others that I’ve used are held together so they are one unit.
Recommended Products
