Your cart is empty.
Your cart is empty.Product Description
3 Pcs Diamond Multi Tool Swing Blades
1. Diamond Material
2. Universal & Quick Release
3. Pack of 3 Pcs 2-1/4 Inch Diamond Oscillating Multi Tool Blades
4. Features for Polishing Cement ,Grit ,Grinding and Grout Removal and Mortar Concrete
IMPORTANT NOTE:
- Fit Black&Decker(except Black and Decker Matrix)
- Fit Bosch (except Bosch MX30E/ MXH180B/ MX30EC-31, Bosch GOP40-30, Bosch GOP12V-28N, Bosch Starlock)
- Fit Craftsman(except Craftsman Bolt-On mode) - Fit Dremel (except MM 30 / MM 35 / MM40 / MM45 / MM50)
- Fit Fein (except Fein Multimaster FMM350QSL, Fein Supercut, Fein Starlock)
Oscillating Tool Diamond Swing Blade
1. Size: 3.0 L by 2.25 W Inch
2. Mainly Used for Grout Removal ,You Can Rotate the Blade on the Oscillating Tool for Various Different Angles ,The Curved Design Helps When Rocking the Tool Back and Forth to Really Clear some Thinset or Grout.
Cutting for Small Project
Shaping Stone
Stone Shaping
for Kinds of Multi Tools
kev
2025-08-23 12:39:37
worked great, good price
Dymond Geezer
2025-08-09 12:36:35
I do grout removal & replacement for a living. My go to blades are DeWalt half circle blades which work very well, but they're $16 each. I bought an 8 pack of these cheap blades to test them and they work well.It's true that they wear down faster than the DeWalt but cost per use makes these blades a comparable value.I also like the shape of these blades, especially for the end of grout lines on shower floors, they make getting into the corners easy.PRO-TIP use the lowest speed setting on your oscillating multi-tool. It's heat that kills carbide coating. Slow and steady wins the race.
C. B.
2025-07-19 18:36:55
Cleaned up 3/16 inch grout with ease and the blade fit on an old Harbor Freight "Chicago Electrics" vibrating tool.
EriK
2025-06-02 10:25:28
I originally thought the 3-pack would get me through the job (6'x10'), but when done the first blade showed little signs of wear. Granted, I did not need to remove all grout, but just enough to clean-up old and provide a little depth for re-grouting. We'll worth it for me, a non-professional!
Consumer
2025-05-30 12:55:30
It does work pretty good but they do not last long at all maybe 30-40 minutes then the blade get dull.. biggest problem is the tip around the edge gets worn, but the top and bottom are still usable. I used to take off grout in bathroom.
Lynn Johnson
2025-05-06 16:14:00
I had to remove two 13" ceramic tiles to gain access to some plumbing. I put one of thee blades in my Ryobi oscillating tool, and it cut through the grout and underlying cement board like butter. Very satisfied with the price point and performance of these blades. Will definitely buy again if needed.
TKO
2025-05-03 15:26:49
These grout removal blades make the process much easier. The price is good and one blade can last up to 30 to 40 linear ft of grout (1/8 wide ). Other renowned brands charge $25 to $30 on average for a single blade. These come in a 4 pack and go for less than $15 and the results are comparable. Good value as well as quality. The images submitted show the results on a ceramic tiled floor.
Lew k.
2025-04-24 13:27:08
I went to home depot first and bought a Diablo brand grout blade for 35$ and it was worn out in no time which surprised me as Diablo normally makes amazing cutting tool blades.I was less than half done and in the lurch so I figured with 6 of these even if they only held half as long as the name brand I'd be OK.Surprise, surprise. I only needed 1. They held up better than the Diablo. To be fair this was my first time removing grout with an oscillating tool so part on it could have been my own learning curve but I'd still recommend this set over the name brand. 6 blades cost me less than 1 Diablo blade.
JOSE A VILLAGOMEZ PEREZ
2025-04-18 16:29:15
Producto de muy buena calidad y funciona como lo esperaba. Incluso me incluyeron como bonus, unas hojas para lijar,,buen detalle.
Stefan Astley
2025-04-10 14:36:52
The media could not be loaded.
Randy Walter
2025-02-17 16:37:52
They worked well
Alex Yankulov
2025-01-13 17:13:27
This oscillating multitool grout removal blade is a handy addition to my toolbox for tackling small grout removal projects. While it has its limitations, it performs well when used with care and precision.Pros:1. Great for Small Jobs: It’s ideal for removing grout in 1/8" lines and works efficiently on materials like plaster, mortar, thinset, and grout joints.2. Wide Compatibility: Fits a variety of multitool brands, including Bosch, Dewalt, Dremel, Makita, and more. This versatility makes it a great value for most users.3. Durable Design: The 2mm thickness ensures decent longevity for small to medium jobs, as long as it's used carefully. Sufficient sharpness.4. Multi-Functionality: Works not only for grout removal but also for shaping, grinding, and cleaning joints in various materials like concrete blocks, brick, and stucco.Cons:1. Not for Fine Grout Lines: It’s not the best option for 1/16†grout lines, as it may be too thick for precise work.2. Tile Damage Risk: You need to work slowly and carefully to avoid chipping or damaging surrounding tiles.Overall, this grout removal blade is a solid choice for DIYers or professionals needing a reliable tool for small-scale jobs. Its versatility and performance make it a great addition to most multitools, provided you're mindful of its limitations.
Michel C.
2025-01-06 10:05:48
J'ai essayé 10 modèles de lame (forme et matériaux diférent) pouer retirer mes le coulis avec époxy dans les joint de la céramique de mon comptoir de cuisine. C'est celui le plus efficace (rapidité) et endurant (résistant à une usure rapide) Pour mon comptoir J'arrive à retirer en moyenne 320 cm linéaire par lame, il faut donc en prévoir plusieurs. Sa forme permet de bien faire les coins et de bien controler la direction et la profondeur. Somme toute, malgré un cout non négligeable dans le réection de mon comptoir, je suis content du produit.
Recommended Products