Your cart is empty.
Your cart is empty.Product Description
4 Pcs Multi Tool Diamond Blades
1. Universal & Quick Release
2. Features for Polishing Cutting Shaping and Grout Removal
3. Pack of 4 Pcs Diamond Oscillating Tool Blades Included:
1) 2 Pcs 2-1/2 Inch Semi Circle Diamond Blades
2) 2 Pcs 2-1/4 Inch Tomahawk Diamond Blades
IMPORTANT NOTE:
- Fit Black&Decker(except Black and Decker Matrix)
- Fit Bosch (except Bosch MX30E/ MXH180B/ MX30EC-31, Bosch GOP40-30, Bosch Starlock 18V)
- Fit Craftsman(except Craftsman Bolt-On mode) - Fit Dremel (except MM 30 / MM 35 / MM40 / MM45 / MM50)
- Fit Fein (except Fein Multimaster FMM350QSL, Fein Supercut, Fein Starlock)
Semicircle Multitool Blade
1. Due to the Unique of the Flat and Circular Design, You Can Rotate the Blade to Use a Different Area of the Blade and Allows You to Get Close to Adjacent Grout Corners Without Damaging the Good Grout.
2. Main Complaint for Semicircle Blade:Some Customers Think It is too Small for Their Multi Tools.
Tomahawk Multitool Blade
1. It is Mainly Used for Grout Removal ,You Can Rotate the Blade on the Oscillating Tool for Various Different Angles .
2. The Curved Design Helps When Rocking the Tool Back and Forth to Really Clear some Thinset or Grout.
About Tile Cutting by Blades
1. We Don’t Think It’s A Good Idea, Grits will Wear Out Very Fast and Has a Tendency to Chip Porcelain Rather than Cut.
2. If You Still Insist on that , We suggest that you Cut Tiles from the Back. This is Much Slower than A tile Saw. Maybe After you Cut 2 Pieces Tiles, The Blades Will be Done.
Some Notice for your Reference
1. If You Won’t Take A Bunch of Direct Force Well, Soft Runs Across the Grout Work Best and Maintain the Edge Better.
2. If You are Careful and Avoid Overheating the Blade and Avoid Applying Too Much Pressure, These Blades will Last.
Cutting
Stone Shaping
Shaped Stone
for Kinds of Multi Tools
Grout Removal
Carving Stucco
Concrete Cobble Stone
Removing Grout
customer. Stone pro
2025-07-18 18:08:41
The price was good. Delivery prompt. I have not had a chance to use the items yet
Customer
2025-07-10 14:19:53
This did the grout removal perfectly. I bought one at the big box store for 1 piece for $30 that is a little difficult to use.
joan
2025-07-05 18:47:21
Used to cut ceramic wall tiles. Worked pretty well but did not last as long as I thought they should. Had to cut slow and replace blade after maybe 15 tiles of 6x12 inches. Fits standard oscillating saw with that design. Mine was jorgenson.
Robert S.
2025-06-05 12:57:15
I didn’t want to buy or rent an angle grinder that I don’t have to route a 10’ crack in a concrete slab on grade driveway in preparation to seal, so thought I’d give these finger carbide blades a shot since I already own a Dewalt 20v cordless oscillating tool. The reviews were pretty positive regarding grout removal and the video of the guy grinding a brick was impressive, but I was curious how they would stand up to prepping a concrete crack.In short, I was impressed! I used one blade to prep a 10’ long crack that went from about a 1/4 inch to 3/8 inch in width. Not only did the blade dress the edges of the crack nicely making them uniform for the backer rod and sealant installation, I was also able to cut down deeper in the slab where necessary for the proper depth of my repair. I’ve posted a before and after photo of one section of the prep. You can see how nicely the finger blade prepped the edges and made a more uniform crack to seal. The carbide blade showed some buildup from the grinding but I couldn’t see where any of the carbide particles wore off. Incredible.In closing, using one XXGO carbide blade that ran less than five bucks I was able to prep this crack and avoid buying or renting an angle grinder. I love my Dewalt oscillating tool and now I have another application that truly makes it a multi-tool!
DJZ
2025-05-21 15:02:41
The semi circle tools were pretty solid and the diamond grits performed ok. The tomahawk blades however were too thin and vibrates too much to do any precision grout removal.
C. froio
2025-05-15 11:23:58
I bought these to remove a bad grout job we inherited when we bought our vacation home. It made quick work of the removal leaving clean grout lines these won’t last long for a contractor but if you’re looking for a diy set these are worth the fair price
justin blakeslee
2025-05-12 16:42:12
Absolute junk. The longer blade lasts for about 20" of grout before the 'diamond' completely wears away. The shorter blade is not long enough for a Dewalt, the Dewalt tool hits the work before the blade does.
Kevin
2025-04-08 20:07:42
Not only good for ceramic, also a must for older walls with plaster over the drywall or lathe. Plaster will eat the teeth off of wood blades and dull metal cutters.
da-freitas
2025-03-17 13:15:46
conforme au descriptif. bonne qualité
Luis Abraham MartÃnez
2025-01-11 17:03:30
Muy prácticos
the Director
2025-01-01 15:05:13
I used this product today (the T-shaped one, not the round blade) on my multitool to remove the grout from in between some tiles, and it totally works. I mean, I'd need a few of these to get through a big job. But it made removing the grout so easy that it was worth every penny.I had large, 12" X 24" porcelain tiles with solid grout to remove (and I was trying to preserve the tiles and keep them whole). The blade goes through the grout smoothly, and I removed 4 large tiles, and probably have enough Diamond left on the blade to do one or so more. With a little finesse, all four tiles came out whole, as I'd hoped.Just a note, the porcelain tiles held up well to my unsteady hand (I have a minor tremor and I occasionally bumped the blade into the tile while cutting.. no damage). Surprisingly the blade stays in the groove quite well. You might have to be a little more careful with ceramic. But I don't think that would be a problem.
rnoriegau
2024-12-17 12:13:30
Las hojas semicirculares están muy chicas, lo que limita mucho la profundidad de los cortes, o bien me obliga a pegar mucho la máquina a los muros, o a la superficie de corte.
Dan
2024-11-24 12:02:24
Got these blades to remove my tile grout and the one blade worked to remove all the grout from my whole kitchen backsplash. I realistically was expecting on blade to not last and that i would burn thru all the blades, but one lasted so much longer than i expected.
Recommended Products