Your cart is empty.
Your cart is empty.
Yakamoz 132 Pieces Sanding Drum Set Including 120 Pieces Drum Sander Sanding Bands Sleeves and 12 Pieces Drum Mandrels for Dremel Rotary Tool
Essential Accessory - 80 120 180 Grit commonest and standard size sanding bands use for smoothing surface and curved edges, polishing both soft and hard materials.
Easy to Install - Drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and acheiving better finishing.
Univeral drum mandrels - 12 pieces reusable sanding drum mandrels contain 3 diameters: 1/2", 3/8" & 1/4", 4 pieces for each size, common and standard size fit for all rotary tools.
Great Quality - These mini sanding bands are high hardness, durable and abrasion-resistant, will not fall apart during use, great for manicure, DIY woodworking, ect.
◆ Please Note ◆
Please wear professional goggles to protect your eyes, because maybe there are flying grits when the sanding drum turning at high speed.
The sanding drum will be attritted faster on metal surface, please replace sleeves timely in order to achieving the better sanding effect.
In case the sanding band fall apart from the mandrel while using, please make sure the drum have been screwed tightly and wear closely to the sleeve.
Specification:
Material (Sanding Bands): Carborundum
Grit (Sanding Bands): 80 120 180 Grit (40Pcs of Each Type, Total 120Pcs)
Inner Dia (Sanding Bands): 1/2", 3/8"/, 1/4"
Height (Sanding Bands): 1/2"
Dia. (Mandrel): 3/8", 1/2" and 1/4" (4Pcs of Each Type, Total 12Pcs)
Shank Dia. (Mandrel): 1/8"
Package Included:
120pcs x Sanding Bands Sleeves
12pcs x Mandrel
Wendy Ford
August 19, 2025
I have a Dremel 200 and these all fit just as they should. The mandrels are all the right size and there are multiples of each size. The only "complaint" (if you can even call it a complaint) is the screwdriver part that is on the little wrench/screwdriver that is included with the actual Dremel is too big and a straight blade. You can use a corner of it to loosen/tighten the screw on the mandrels. But if you have a very small Phillips head screwdriver it's much easier. Problem solved and no big deal.
David Avalos
July 23, 2025
Exactly what it claims to be. I bought 1 pack of these at Ace hardware 1 spindle and 3 Sanding barrel's ,all the same size mind you, for $7.00. I go thru a lot of these and this is an extremely great deal.
Joey L
May 27, 2025
The original Dremel products are not easily available. I think because it is one of the few Dremel replacement products that are used up quickly and need replacement often. Everything else is made of steel or carbide like discs. The sandpaper sleeves don't last long (original or these) and I have to replace everytime I start a new project/item. Even if you can find the Dremel brand, they are much more per sleeve than these. As far as I can tell, these work fine, the projects turn out fine and there is not obvious residue left on the project.The Drums have a set screw that appears to make no difference. The sleeves slide on snugly and the screw does not seem to tighten them at all, but that is fine because they hold in place without slippage, screw or not.I did not try using my original Dremel drum since these come with them.
Tom M.
May 1, 2025
Works as good as original!
Theodore M. Anderson,Jr.
April 17, 2025
Bad quality
george heinz
March 20, 2025
I use Dremel products all the time
Tony Ferrante
December 6, 2024
So the description reads “Essential Accessory - 80 120 180 Grit†but every piece is the same grit (I’m estimating about 80 grit). Compared to the original Dremel brand these are clearly NOT made as well but they do work and they are inexpensive so if you wear one out, just replace it. 132pcs for $10bucks is $.07-$.08 cents per piece. All the mandrel seem to be decently made and fit the sanding bands well. Not the best, not the worst just typical chinese..
RN
December 5, 2024
Good for the price
Recommended Products
