Your cart is empty.
Your cart is empty.
【Function】
Fan Clutch Tool Removal kit Designed to easily remove lock nuts on the temperature dependent thermo-viscous fans.
【Features】
This is a two-piece multifunctional tool that you will like.And it's price is more affordable than three-piece.It will be more convenient and durable to use.
Wrench thick:6mm/0.23”,Wrench long:37.5mm/14.8”.Holder thick:5mm/0.2” ,Holder long:38mm/15”.
【SPECIFICATIONS】
Packing include: (x1pc) 32mm & 36mm fan clutch wrench,(x1pc) double-ended water pump fan pulley holder
【Compatible with】
BMW E34 E46 E90 E39 E36
BMW engine models M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32
Applicable to some Ford, GM, and Chevy models.
Applicable to some Mercedes-Benz models after 1990.
Fred
August 30, 2025
Great product good for tight fits like the fan on a bmw.
Darah Bennett
August 20, 2025
The wrench with two holes that grabs the fan clutch will not stay in place. It must be held in place very carefully, and that means you can't put any force into it.The crescent wrench is aluminum, and the aluminum was chewed out by the fan nut almost immediately. The yield point of this wrench is less than the tightness of the fan.The crescent wrench is also not shaped correct. More of a pac-man shape than a hexagon.
Claudia V.
July 6, 2025
Liked the price, but quality might leave a bit to be desired as the wrench "jaws" expanded on a very tight fan clutch. Was able to still use these but only after bending the "jaws" back with 20 ton press to useable spec. 1999 BMW 528i
Jeannie Shepard
May 17, 2025
Fit my BMW 325xi and works perfectly
Jose v
March 24, 2025
Literally between the first 5min of using her it literally bent. Bent it back and used . Held up even when bent back .
Dave
March 9, 2025
The wrench sent to me didn't fit the bolt pattern for my M54 E46. It was also slightly bent which made it even more difficult. Would not recommend.
Leonardo Mullar
January 6, 2025
The holes in the holding wrench are too small to go over the bolt heads. The wrench is harden steel and difficult to size up with a drill bit. I used a rat tail file to enlarge the holes for proper fit.
sandra T
December 20, 2024
Great price and worked for the job I had to use it on.
Recommended Products
