Your cart is empty.
Your cart is empty.Product Description
Dual Motor Plaid Badge Sticker Emblem for Tesla Model 3 Y X S
Notice:
1. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
3. Before sticking, please keep the sticking area clean and free of any moisture. Otherwise, it will affect the firmness!
R7177
2025-08-23 11:27:58
this Plaid badge looks really nice. looks really nice when placed properly. You have to find the spot that doesn't;t have a bend or curve so the badge lays flat, then you shouldn't have any issues with it falling off. great price and its really high quality.
x7
2025-08-08 12:51:44
This product looks absolutely sick on my matte grey Tesla Y! Complements the car’s look, and it definitely turns heads. Super easy to install, and the quality is top-notch. If you want to add some style to your Tesla, this is the way to go! âââââ
Jayme
2025-07-07 12:11:03
The adhesive definitely isn't as strong as stock, but time will tell if this lasts. The letters look great and match the OEM font and size. I chose to not install the bottom line part as I don't have a performance model and I'm not a poser. I will of course update this review if any issues arise.
Mr. Gadget
2025-07-03 18:28:49
The lettering and line look great! The issue is with the adhesive. The car had less than 25 miles on it when I make the change. I took my time and removed all the old sticker. I then use alcohol to remove any residue. It was a clean install. It looked great until it didn’t. After about two months, I noticed the D in the “dual motor†was crooked. It wasn’t much long after that that it came off completely. Don’t waste your money on this one. It’s an expensive for a reason.
Alex Divov
2025-06-10 17:23:39
What I liked: A quality item that looks oem.What I didn't like (so much) Tricky to install perfectly. I am very good with my hands but I can imagine that ham-fisted individuals can really mess up this installation.Some tips.Use masking tape on the car before you start and make a perfect line corresponding with your "dual motor" badge.Mark with a pencil on the masking tape where you want the badge to start/finish.Very important: Do not remove the cover to the sticky tape side till the very end!The stuff sticks like crazy! (to everything and anything in sight!)There is a clear plastic on the front side of the letters which is supposed to hold them in place when you eventually present the sticky mounting side to the car. Unfortunately this clear tape is weak and does not hold the letters and then you end up with a big problem!So, here is the secret: Before you punch out the sticky mounting side, remove that stupid clear tape and use some duct tape from your toolbox to hold the front side of the letters in place. Make the duct tape a bit long and then fasten the ends of the duct tape with drawing pins or a staple gun to a piece of wood. Now your job is lying nicely secured with the mounting tape side facing you. Only then start to pop off the excess mounting tape material. It hasn't been that well cut out, so it's a bit of a fiddle. Take your time and be careful that the letters are still sticking to your duct tape. This keeps them correctly spaced and straight.Finally, once you have got all the excess mounting tape removed and your letters are free and correctly spaced but upside down. Only now do you remove the protective tape off the sticky mounting tape. Use tweezers etc, it's not so easy, take your time. Now release your drawing pins and lift your duct tape with all the letters attached. Starting with the X which is the biggest, make sure you present it perfectly and correctly relative to the masking tape line on the car. Don't make a mistake, this stuff is unforgiving, once that mounting tape touches the car it doesn't come off again. You've got 1 shot only, do it right. Now you continue bringing your duct tape strip to the car with the following letter and then the next and the next etc doing one at a time. Do it right and the result is very gratifying. Once all the letters are stuck on your car you can rip off the duct tape and your letters should be perfectly spaced and straight.
Mamab09
2025-04-19 12:03:04
Easy to install, bang for your buck and adhesion is good.
Acilius
2025-04-03 15:37:09
Just got a 2021 MS Plaid, really didn't care for the "PLAID" writing badge on the back so I threw this one on to match the 2022's and newer. Solid! Looks great and OEM!
Heather
2025-02-28 10:32:13
I had this professionally installed and it looks great and has held up so far!
Cemil Durmaz
2025-02-16 12:50:53
Çakma duruyor orijinaliyle alakası yok
Mo Y.
2025-02-11 17:39:57
Easy to put on the car
Shaji
2025-01-23 16:54:29
Great product and easy to install
Michael Quach
2025-01-01 16:09:50
Parts of the badge fell off. I had to order a second one and install again.The tape that's used is not very sticky.
Recommended Products
$25.99
$ 11 .99 $11.99