Your cart is empty.
Your cart is empty.Create beautiful door and window casings using this Yonico 16124 casing router bit. Casings conceal open seams around newly installed Windows and doors. Using this bit you can create casings that are at least 3 inches wide. 1/2" Shank.
chris
2025-08-24 16:30:05
Are these the best bits available?No.Will they cut?Yes.Is it worth it to buy cheap instead of a brand name?In this case, YES!These may not be the very best bits out there but for the price and quality of them, they are pretty good. If you want to make a few things on the weekends then I would look no farther.If you are a professional and need to use these bits all day every day, then maybe look for better quality. Then again, I've gotten other brand name bits and they have come damaged or lasted only a few BF before breaking.As long as the customer service department is still pretty good then you can't go wrong with these bits. Even if they break, I can buy 6 bits for the same price as 1 bit from a brand name company. Stop paying for a name or certain color. Its 2023 and planned obsolescence is in full effect so it doesn't matter anymore, all products are designed to break and not last very long. So might as well save a few bucks and get the cheap set. All the router bits and other products start life in the same factory, it's only the name that changes.
Customer
2025-08-23 17:11:06
This is a heavy bit. The blades are sharp. It feels like a quality product. The guide bearing rolls smoothly. Please use with a big router. I personally believe it is designed for a table router system as it does vibrate a but when hand-holding the router. The quality of the work piece is similar to that of moldings you will find in a hardware store.
Matthew A Emht
2025-08-12 15:06:37
I’ve made about 15 8’ sticks out of b grade 1x4s and it still seems to be working ok.
Small Town Carpenter
2025-07-15 13:49:36
I used this bit to mill base trim for a cabinet I built. No burning and worked like a champ!
L1
2025-07-14 18:33:48
Vibrates too much. Wanted to make baseboards. The bearing is 0.010" out, just below is 0.004, and the rest is 0.003" off. So yeah junk.
Dirty money
2025-04-27 10:05:32
Made over a quarter mile of trim for me home with one of these. Still running boards too. Edge holds good evening after hitting a couple staples.
Mr.Rideout
2025-04-24 15:55:33
Works as expected. Do not use on a single speed router if your not installing on a commercial shaper! Check the speed charts and see if compantible or buy a speed regulator. I had to check the manufacturers site for optimal running speed. More info should be included. Bearing on top not the best quality. Works great once dialed in. Nice clean cuts over many feet of solid knotty Alder stock so far and blade still cuts smooth.
Customer
2025-04-22 17:38:57
I liked the pattern so much I did the entire trimming inside and outside of the house. It's still sharp and still going strong. I will tell you, its not for all routing tables, it's a long bit so I had to borrow one that had a long opening in the middle.
MARIA A.
2025-04-13 17:55:00
ES EXACTAMNETE COMO SE DESCRIBE
Mark Man
2025-02-28 16:14:39
As expected ðŸ‘
Applepad
2025-01-12 12:34:53
A solid product.
David Sánchez
2024-12-21 10:54:29
Buen producto, de muy buena calidad, la moldura es de muy buen diseño y tamaño.
norman lac
2024-11-13 15:40:47
Bon pour du bois mou et utilisation occasionnelle
Recommended Products
$28.95
$ 14 .99 $14.99