Your cart is empty.
Your cart is empty.Use the Yonico Bullnose Beading Router Bit 13191q for 1/8"r, 1/4" bead bullnose cuts. Two flute carbide cutters and 1/4" shank. Bullnose bead router bits are great for adding beads to furniture corners, legs and face frames. This design softens the edges of the piece and adds a classic look to it as well. To create the complete corner bead on furniture edges and legs, flip the stock lengthwise and rotate to the same corner to complete the profile.
JohnnyB
2025-09-03 16:13:56
I needed to match some base trim for a remodeling project I'm working on and this bit really worked well.The bearing was very smooth and the carbide was super sharp. Using my handheld router, the bit cut perfectly in both pine and the poplar boards that I will be using for my project. The cut was super smooth with zero chatter and required no sanding after the cut. I expect it will work well on harder woods such as oak or maple also. For stability, I generally prefer bits with a 1/2 shank and this bit has that as well.I would say this is a high quality bit at a very reasonable price.
Corvairking
2025-08-10 12:48:59
Great item and price and service. This is a quality router bit that is extremely sharp and makes short work of your beading projects. Leaves a nice professional mounding like appearance.
Fab
2025-07-31 15:23:47
Not very expensive…works great
Robert Matlaga
2025-07-29 20:12:40
Bit worked perfectly. Cut Brazilian cherry flooring to create a bullnose.
Goose Slayer
2025-07-13 14:06:43
Well made, sharp, accurate, should last a long time.
S.R.Tauzier
2025-07-12 16:27:16
The bit works fantastic! I made a lot of money in the French Quarter with this bit!!
Mark Nelson
2025-06-08 11:56:47
First time using one of these style bits.
Edwin Rosario
2025-05-22 14:24:12
Cuts well however the bearing does not line up well such that the bit leaves a flat spot. I’ve had to remove the bearing and use the bit in a router table which works well as long as the wood is perfectly flat.
Tarachand Satsangi
2025-05-16 20:24:35
Works great as expected.
Luigi Solari
2025-05-08 16:40:05
Yonico son buenas brocas, valen el dinero que cuestan. No son Amanatools o Freud, pero sacan de apuros y tienen buen filo
diywannabe
2025-04-25 14:04:11
This was purchased for a specific job to cut a 3/8†bead and return along the edges of some MDF door linings.This is not a size I usually need, and as cutting MDF is not kind to router bits I only wanted a budget choice, and this one was less than half the price of the Axminster alternative.This did the job perfectly. It did need a medium speed setting to prevent burning but it ran smoothly and cut very cleanly, and showed no signs of wear at all.I have tried Trend bits as a budget option before and found them to be a waste of money. This performed so well I am going to buy more of the same brand for day to day use.One note is that this was listed on Amazon UK but shipped from Amazon in the US and arrived in a few days. If Amazon UK are reading - please consider stocking these here.Recommended.
MR1318
2025-04-16 14:41:30
Have now routed nearly 80 metres of softwood with no fall off in performance. Paid 14gbp inc postage from the states to UK. At least 5gbp cheaper than anything I can get from around the corner (and 15gbp at the time of purchase), and compared to trend (who i have used for jigs), well, let's not even go there.Happened to check 15 minutes after order placed, and item was despatched. Arrived so quickly, Amazon still think it is delayed, months later.
Customer
2024-12-11 13:34:53
Used for panelling. Very sharp and good clean cut. Used on about 20m length of redwood so far and still good
Recommended Products
