Your cart is empty.
Your cart is empty.This slotting cutter router bit assembly cuts 3/32 thick x 9/16 deep slots. Comes complete with 1/4 shank/arbor and bearing, washers and nut. Highlights: - Cut slots for joinery and other standard applications - Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge - Silver induction brazing for maximum strength and durability - 2-Wing kerf cutter for industrial use - Manufactured with anti-kickback design to help prevent workshop mishaps Item Includes: 1 Router Bit Kerf cutters come in a range of widths and depths to accommodate all your slotting needs. Combined with a router bit arbor assembly this creates a slot cutter of your choice.
Susie Brown
2025-09-07 15:35:07
Best bit! Worked great to make dido for my coin shelf. Very sharp. Left a very smooth grove.
Customer
2025-08-19 10:31:39
Works well for me.
Missing Fatboy
2025-08-11 16:47:10
In my opinion, Yonico makes quality router bits. This one is tricky because 1/16" is such a narrow cut. It's really just a horizontal saw blade. I bought this to install vinyl T-moulding edging in a custom melamine sewing table top.First thing to know is you don't need to make the full depth cut in one pass. Three passes or more works best in my experience. Doing it in one pass builds up WAY too much heat and you'll ruin the bit in no time. The cutting teeth are so narrow at 1/16" that the metal disk is almost as thick. I actually wire-brushed the pretty yellow paint off to reduce friction-produced heat. This seems to help, but multiple passes still recommended for a full depth cut.[Edit] In the process of learning the above, I pretty much had ready heat-damaged the bit, making the carrier disk brittle (photo). Working on my second project, one of the teeth snapped off. Can't blame that on mfr. as I clearly mistreated the bit. I've ordered another and will be more careful this time.
J. Reman
2025-07-31 18:50:51
Routing a spline into Baltic birch plywood for plastic edging. Right after making the initial plunge cut smoke was everywhere, the paint coating had come off and was burning inside the plywood. Fixed the problem, inspected the cutter and felt OK to continue. Started cutting again and got about one foot and noticed severe vibration coming from my router. The cuter had warped and was cutting a way bigger kerf. Don't buy this product or anything from this company they make junk!
Belia Rodriguez
2025-05-11 11:35:53
I needed to make a slot to hold a sheet of metal in a wood top and this made the perfect thin 1/16th slot I needed. Good cut quality.
Paul M.
2025-04-23 13:28:36
Worked perfectly. Used in MDF, crisp, clean groove.
chris
2025-04-09 14:04:35
got this bit for cutting a slot for t molding for an arcade projectcuts smooth and clean and makes the perfect size for the t molding for a nice snug fitgood product glad i got it.
Jose Luis Galllardo
2025-03-25 18:03:03
Que me llegó lo que buscaba
Kirk Quesnelle
2025-03-09 14:16:44
Great Bit. Exactly what I needed. Works as expected
E3cortex
2025-02-24 12:20:38
Qualité médiocre, la lame s'est cassée en 10mn.
John
2025-01-26 18:17:13
Great product great price
Joel d.
2025-01-25 12:21:33
Una broca de buen material y afilada cumple con su función
SebC
2024-12-21 12:19:18
Excellent tool. Good results on work piece. Only down side is the bearing is too small for my need.
Recommended Products
