Your cart is empty.
Your cart is empty.Product Description
Yorkim 3157 3156 3057 4157 LED BULBS, HIGH BRIGHT RED
- 300% brighter than halogen bulb
- Non-polarity design, standard 3157 socket, simply plug and play as stock bulb
- Offer optimal visibility and stronger light penetration, no dark spots, no sharow area
- Built-in intelligent IC driver,stable input current protects the circuit, ensure the secure temperature range
- Full Aluminum Housing ensures better heat distribution, reach a long LED bulb life up to 50,000 hours
- Fit for socket 3156, 3157, 3155, 3157NA, 3056, 3356, 3456, 4156, 3057, 3047, 3357, 3457, 4057, 4114, 4157 etc
PLEASE CHECK YOUR BULB SIZE BEFORE PURCHASING, THIS IS THE 3157 3056 3156 3057 4114 BULB
These 3157 LED Bulbs are commonly used for brake lights, tail lights, turn signal lights, day running lights and etc
About Yorkim
Yorkim is committed to provide a brighter solution for your vehicle. Our mission is to provide high quality LED bulbs which balance brightness, duration, and compatibility to our global customers. Utilizing the most up to date cutting edge LED technology, combined with a state of the art manufacturing process and competitive, all together make Yorkim the best choice to light up your way on the road.
Yorkim 3157 LED BULBS
Specification
- LED source: 58SMD 3014 & 4SMD 3030 LED Chips
- Color: Red
- Lumen: 1800LM/bulb
- Working Voltage: 10-30V
- Output Wattage: 7.4W/bulb (Low Power Consumption)
- Service Life: Up to 50,000 Hours.
- IMPORTANT NOTE
- 1. Extra load resistor might be required to avoid hyper flashing issue when using for turn signal light.
- 2. Can-bus error free for most vehicles, but the error free capability may limited to the some sensitive vehicles (especially European vehicles).
- 3. The bulb size may vary between trim of your vehicle, please double check owners manual or original bulb size to confirm.
Jane Edwards
2025-08-31 12:26:44
So far so good. Nice bright lights. So far no failure with flickering or burnout.
jjp1602
2025-08-25 16:27:24
Works great!
David Davis
2025-08-11 11:34:29
The bulbs are nice. However, I need to read the fine print on description. For my vintage truck a 2004 dodge ram, I need a load resistor for the blinkers to work also for the “bulb out indication†on Dash to go out. Other than that buyer beware resistors are needed for this product. Read the description completely, I did not.
Henry
2025-06-14 16:44:16
These are great and fit perfect for 2022 Ford Maverick. Very easy to install, pop your tailgate, unbolt 2 bolts the whole light assembly comes off. If you want to be safe, remove the wire that goes into the housing. Otherwise I just twist off each bulb socket.Note you'll need 2 bulbs on each side. I prefer the Red over the White. The Reds are definitely brighter.I'm dinging down 1 star because one of the bulbs already went out (only lasted over a year) And it's a weekend truck to boot. Will see how long the rest will last.
Andrew B
2025-06-12 17:10:05
The media could not be loaded.
Greg W
2025-05-30 16:29:47
This is the second set that I bought. I have one set in my truck, and I got another to put in my sidewalk lights. I have a 12V DC transformer/timer so these bulbs work great with the landscape lighting. White lights attract too many bugs, these don't.The bulbs in the truck have.been installed for a couple years and still are just as bright. I bought a new turn signal flasher control because of the rapid flashing.
Deaks
2025-04-24 14:17:59
These bulbs are a lot brighter than incandescent bulbs.
L. Wahlberg
2025-03-18 10:54:29
3/4 work fine, one is only lighting half way… I ordered another pack and hope to get three more that work and have a couple backups… the ones that work put out nice red light… it’s unfortunate I have to wait to have a full working set… oh well… price is cheap, you get what you pay for…
Blanca
2025-03-07 17:57:57
Utilicé 2 para luces traseras y 2 para luz trasera + frenos en una Chevrolet Venture 2003.Buena iluminación solo que en las de frenado no se nota el incremento de luminosidad al pisar el freno y además manda falla en la computadora.
Perry from Calgary
2025-02-14 10:37:09
Easy to install, however, in a 2010 Edge I needed to add Resisters to each rear light housing to stop the fast blinking. The voltage in the edge is too high for LED bulbs. They are a lot brighter and easier to see during the day.
Gary Wilson
2025-01-04 11:53:57
3 of the lights worked amazingly. 1 light was considerably dim, looked burnt out when it was in tail light assembly. So im happy for the most part.
connormacleod
2024-12-14 20:19:20
Used these to replace the tail/ brake lights on the rear of my F350. Very impressed with the density of LED's on these little bulbs. When placed in the socket and inside the tail light lenses the added LED's made an immediately noticeable difference in how bright the tail lights were vs stock. I can't comment on the longevity of the product yet, but based on user reviews I hope they hold up to the test of time. So far they seem better quality than LED's I've tried in the tail lights
Jeff B.
2024-11-15 12:22:37
Despite Amazon "Confirmed Fit" saying these bulbs fit my 2015 Chrysler Town & Country. They do NOT fit into the socket all the way for front turn signals, and would only fit the rear turn signals if they were forced into the socket. Bulbs would not light up at all for rear turn signals. It's too bad they don't fit because when the front bulbs did light up, they are noticeably brighter than the incandescent factory bulbs in both parking light and turn signal mode. Hopefully Yorkim will make a bulb that is a true 3757A bulb replacement.
Recommended Products