Your cart is empty.
Your cart is empty.Product Description
PLEASE CHECK YOUR BULB SIZE BEFORE PURCHASING, THIS IS THE 3157 3056 3156 3057 4114 BULB
About Yorkim
Yorkim is committed to provide a brighter solution for your vehicle. Our mission is to provide high quality LED bulbs which balance brightness, duration, and compatibility to our global customers. Utilizing the most up to date cutting edge LED technology, combined with a state of the art manufacturing process and competitive, all together make Yorkim the best choice to light up your way on the road.
Yorkim 3157 Led Bulb, pack of 10
Specification
- LED source: 18SMD 5050 chips
- Color: 6000K White
- Lumen: 1100LM/bulb
- Working Voltage: 12V
- Output Wattage: 5.4W/bulb (Low Power Consumption)
- Service Life: Up to 50,000 Hours
- IMPORTANT NOTE
- 1. Extra load resistor might be required to avoid hyper flashing issue when using for turn signal light.
- 2. Can-bus error free for most vehicles, but the error free capability may limited to the some sensitive vehicles (especially European vehicles).
- 3. The bulb size may vary between trim of your vehicle, please double check owners manual or original bulb size to confirm.
About Our Products
- Super Bright 18 SMD LED Chipset - 360 degree lighting angle design, No blind spot, 300% brighter than stock lamps
- Latest LED Technology - No flickering, No UV light Emission, & No IR radiation; Easy plug-and-play installation
- High Quality Aluminum Body - Low temperature, low power consumption, & long-lasting life up to 50,000 hours.
- Universal 3157 Standard Socket - Commonly used for 3056 3057 3156 3157 4157 LED Backup Reverse Lights Bulbs
- FITMENT - 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc.
- These 3157 LED Bulbs are commonly used for backup reverse lights, brake lights, tail lights, turn signal lights, day running lights and etc. For Turn Signal LED Bulb, a 50w 6ohm Load Resistor (ASIN:B07KS6KMYG) is needed to prevent hyper flash or error code.
Jeff
2025-08-28 16:10:13
These lights are super bright. They work exactly as stated. If you are not familiar with LED lights and older automobiles, take note though. They will work perfectly as a tail light, or interior light or any application that they fit. HOWEVER, they do NOT have the internal resistor required to keep it from Hyper Flashing when used as a turn signal. It will most definitely hyper flash without the resistor kit. You can purchase the resistor kit for less than 10 dollars. It does take a little skill to install the resistor kit. Or you can purchase the LEDs with the resistor installed. They are more expensive than installing the resistor kit. Modern autos do not require the resistor kit. These are quality LEDs if used properly. Just dont be upset if it hyper flashes on turn signal lights if you do not have the resistor. It will surely occur.
Rodney Haley
2025-08-24 11:14:58
Installed these bulbs as daytime lights, reverse lights, & brake lights 05 Suburban. For some reason these bulbs in the brake light sockets won’t let the cruise control work (just in case someone runs into the same issue). Other than that very pleased my with purchase!
Paul Hawkins
2025-08-17 19:09:16
BREAK LIGHT BRIGHTNESS:Just installed one brake light and one reverse light on one side to compare with old halogen bulbs. The brake light has two modes, dim and bright, the dim is normal driving and bright is for when you brake or blinker. The dim mode seems just as bright as old halogen bulbs but no brighter, and the bright mode is actually NOT as bright as old halogens. Pretty disappointed in that. Also to note that the time of elimination is quick, faster than halogens so when next to halogens, the halogens will appear to be slightly delayed. Sort of warm up time.INSTALL:On my 2016 F150 XL, I did not get a fast flash blinker on the tail light, but my blinker arrow on the dash flashed fast. and I did get an error code. So.. I installed a resister, note that the resister wires typically to the outer two wires on the light. I used 18 gauge heat shrink crimp connectors. The fast flash stopped. Yay! What I am unsure about is if I will need a resistor on the reverse light. No blinker so no fast flash, right? Well, it may still throw an error code. Gosh, I hope I won't have to install resisters for every single LED light bulb. If that's the case I'll go back to halogen.Also to note, the back of the bulb is slightly wider than the halogens. Other reviewers have noted this, saying that they had fitting issues installing it. I did notice that my new LEDs were wider but didn't have an issue. They fit in fine.
GM Performance
2025-07-08 16:08:43
I've used many Yorkim LEDs and they are all great would definitely use them for all my lights also the customer service is top notch the best bang for your buck by far
Kindle Customer
2025-06-13 14:09:34
Husband loves function and brightness
steve
2025-06-12 14:37:50
They work great but my 97 F150 needs a special LED flasher relay or else they don't work right..or not at all..i guess it's some kind of current thing.. anyway i changed out my blue flasher relay and these bulbs worked very well! Fantastic deal! 😀
NickyNine
2025-05-08 12:11:58
I can’t speak for the light because I returned them. however them seemed to be very poor quality. while I’m sure they would work, I don’t want them on my truck.
Francisco Orozco
2025-04-27 12:06:01
Buena calidad
Stewie
2025-03-27 15:48:30
Fits perfect....really bright
remi ricard
2025-03-19 10:50:09
Bon rapport qualité prix.
Nicolás GarcÃa
2025-03-01 16:52:54
Se ven muy bien.
Customer
2025-02-23 15:14:35
looks nice
Paul Watson
2025-02-02 16:08:30
Nice and bright
Recommended Products