Your cart is empty.
Your cart is empty.Axle Bearing and Seal Kits from Yukon Gear and Axle use high quality bearings and seals designed for specific applications in differential systems.
J
2025-07-23 18:36:42
If you’re looking for replacement rear wheel bearings for the 1999 gmc Sonoma and Chevy s10. You want the Yukon AK 1563.It was a process getting the correct sized bearings and hoping to save someone that trouble. I believe it’s the same for 96 - 99 S10 and Sonoma. I had the C series dif with the 7.5 ring gear.The bearings from the factory are no longer made. Two other stores sold me something for a much larger truck; even after confirmed by vin. Only discovered after draining the dif and pulling axles.Factory bearing was the Koyo DB-59722 (2.25 Outer Diameter, 1.4 Inner Diameter). The Yukon AK 1563 bearing and seal package is OEM fit. It’s another Koyo bearing, don’t remember the number. It is also a 2.25 Outer Diameter, 1.4 Inner Diameter. Seal fits the axle and housing snug.Just completed the job and the Yukon AK 1563 bearing and seal package is OEM fit. Test drove for a while and everything is as it should be.
Mrs.H0ugh
2025-07-14 11:54:53
Perfect fit!
Devin Gagne
2025-07-06 21:20:13
fit and works great, will update in a few months if i remember
Installer
2025-06-06 14:03:32
I ordered these bearings up and they fit perfectly in the rear-end of my 99 cherokee with the dana 35 rear axle. They went right in. They make no noise. I'd say this is a success.
Cheryl Gammel
2025-05-06 13:46:54
The bearings were a perfect fit, the seals worked but were not like the original and were a bit more difficult to install.
Ken Levine
2025-04-02 14:02:56
I trust this name brand more than the others I've never heard of. Fits my '96 Camaro 7.5" rear just fine.
walla2k5
2025-03-26 17:40:11
Just what I needed for the Dana 35 rear axle on my Jeep tj.
Nicholas
2025-03-20 14:37:26
Used on a '01 Jeep Cherokee XJ with the Chrysler 8.25 rear diff. If the jeep wasn't a total beater and I didn't need it back on the road RIGHT NOW, which was my situation, I would have shopped around a little more and found something more quality. The bearing is pretty cheesy, the roller bearing cage was blued and discolored as you often see on metal that has been overheated, so that immediately left me worried. You can see the seams where the cage is put together isn't even welded or one piece its just bent back together. The seals were absolute junk, the metal of the seals is so thin it bent and warped the rubber seal when I tried driving it into the axle tube. And don't get me wrong I really cleaned up the axle tube surface and drove it straight in. I had to try to locally source another seal which I couldn't so I had to reform the metal of the seal on the bench to as round as I could get it and then I installed it anyways. Time will only tell if the bearing and the seal hold up, but to take such a chance after spending over fifty dollars in gear oil and a few hours worth of time to potentially have to do it again because this product is of poor quality is really hanging over my head. I wouldn't recommend this kit unless you're broke or have the time and money to do the whole process over again when this cheapo kit fails.
Jesus Araujo
2025-02-16 19:43:02
Buen producto confiable
Bill G.
2025-02-11 13:44:57
I was surprised that Amazon even listed these.I caget them locally so I thought I'd take a chance.Very pleased with the fit & quality of these parts.
PB
2025-02-03 16:35:15
Perfect OEM replacement of a hard to find item. 2.25"
wayne newbery
2025-02-02 21:09:36
right part
Recommended Products
