Your cart is empty.
Your cart is empty.YUNGUI 10 Pieces 73mm x 100mm Copper Strip board,957 Holes PCB Prototype perfboard Kits for Soldering and DIY Electronic Project with Arduino Kits
Product Description:
Quantity:10 pieces
Size:7.3x10cm / 2.9x3.94 inch (W x L)
Specifications: single-sided
Thickness: about 1.6mm
Pitch:2.54mm
Hole diameter:1.0mm
Color: Brown basic,Brown tone
Material: bakelite
Package List
10pcs 73X100mm Copper stripboard
James R. Acker
2025-08-26 14:58:15
Was very impressed. Excellent copper traces, solid. I use a dremel to cut to sizes I need, works well and the traces stay solid even where the blade cut in half, they don’t fold up or get messy.Just what I’d hoped.
Liesejunh
2025-08-22 20:20:12
Beginners are going to have a pretty hard time with this one if they make a mistake. Applying excess heat to the pads will lift the traces. Make sure you have flux on hand because for me, the solder just didn't seem to hold well
Starman
2025-08-14 10:10:24
Better than what I expected!
Amanda P.
2025-07-20 10:17:58
Great quality and a bargain. I use these for building guitar pedal circuits and they do a great job. The holes are smaller than I would like, but I get by. I would recommend this to some one looking to buy veroboard.
Maddogrecurve
2025-07-04 13:24:05
These are tiny! I bought these for practice purposes, they take solder well, are durable!
Customer
2025-06-29 12:56:20
Good for making prototypes when you need something more permanent than a breadboard, but are not ready to have custom PCBs made yet.
GJ Beans
2025-05-07 15:44:33
Never had any issues with delamination, pretty easy to cut with several passes of a razor knife on either side. I use a handheld 1/8" drill bit to make cuts in the traces, and to slightly chamfer holes on the plain side to help insert stranded 22 awg wire a little easier. Would buy again.
Soporifix
2025-04-26 14:20:39
It works fine, but the backing is very brittle compared to the more costly vero board, so you need to be very careful when cutting or snapping it.
James R. Acker
2025-04-07 20:11:37
Was very impressed. Excellent copper traces, solid. I use a dremel to cut to sizes I need, works well and the traces stay solid even where the blade cut in half, they don’t fold up or get messy.Just what I’d hoped.
Liesejunh
2025-03-29 11:35:06
Beginners are going to have a pretty hard time with this one if they make a mistake. Applying excess heat to the pads will lift the traces. Make sure you have flux on hand because for me, the solder just didn't seem to hold well
Starman
2025-03-05 15:41:07
Better than what I expected!
Amanda P.
2025-02-26 13:23:43
Great quality and a bargain. I use these for building guitar pedal circuits and they do a great job. The holes are smaller than I would like, but I get by. I would recommend this to some one looking to buy veroboard.
Maddogrecurve
2025-02-12 19:01:10
These are tiny! I bought these for practice purposes, they take solder well, are durable!
Customer
2025-01-20 12:17:14
Good for making prototypes when you need something more permanent than a breadboard, but are not ready to have custom PCBs made yet.
GJ Beans
2025-01-13 16:59:29
Never had any issues with delamination, pretty easy to cut with several passes of a razor knife on either side. I use a handheld 1/8" drill bit to make cuts in the traces, and to slightly chamfer holes on the plain side to help insert stranded 22 awg wire a little easier. Would buy again.
Soporifix
2024-11-22 18:00:53
It works fine, but the backing is very brittle compared to the more costly vero board, so you need to be very careful when cutting or snapping it.
Recommended Products
![Arduino MKR WiFi 1010 [ABX00023]](images/loading.gif)