Your cart is empty.
Your cart is empty. Technical Parameter:
1.Hi-power motor is adopted with all drive axes, maximum speed up to 20,000 rpm 2.Input voltage/Current /Power: 12V/3A /36W 3.Input Voltage of Switch Power Supply: 110V - 240V 4.The largest diameter of processed material: 50 mm (Positive Jaw Gripping Range: 3mm-30mm,Opposite Jaw Gripping Range: 3mm-50mm;Kind Notice: manual measurement, there will be 2-3mm error.) 5.The length of processed material: 150 mm 6.The chuck and collets is 1 to 6mm 7.X-axis slider travels: 150mm 8. Center height-50mm, center distance- 150 mm 9.Machine size:310mm*100mm*175mm
Package Includes：
- 1 x Mini Lathe
- 1 x Set of Accessories
- 1 x Power Adapter
- 1 x Workbench Plate
- 1 x Manual
The miniature machine tools have the same features as big industrial machines, the only differences are their size and the 12V drive. You can use it for DIY model making and some little crafts, which is also able to process hard wood, soft metal, alloy etc...Based on its modularity and the child friendly use, that's ideal& creative product to inspire children hand-on skill&innovative ability.
Q2: Is it easy to assemble and operate the miniature machine tools?
What we provided is the installed complete machine tools, meanwhile, there is full set of English manual & guide videos to show you how to use it smoothly. If you still have any query, please contact our online customer service.
Q3: How about the after sales service?
Free spare parts and one year warranty
ConfusedButSatisfied
August 19, 2025
I really wanted to write one of these. The quality with these mini lathes is all over the place. If you get a raised bed, you can use the large diameter steps of the lathe chuck. By the way, this machine is dated this year. They machined new jaws for the typical cast chuck! Most parts are painted or anodized and it is heavier than you’d expect. I’m guessing around 5 pounds or more. They thought of so many little things… the 2.5mm Allen wrench for the slots is a T handle, there’s a little plastic bin with all your other tools, including a cast metal center finder, parts lists and stuff like that. Slots are trapezoid t slots, with grub screw expanders, and Phillips screws on the painted plates on the back. I use a little Phillips bit glued into a wire nut to quickly loosen those. There is a knurled live center, and a grub screw in a milled slot on the tail stock. It is well greased, like everywhere. It’s white lithium grease which may wear away after a while, wanna keep an eye on that. Single speed, rocker switch inline from the motor, thicker power cord than the old ones. It’s from an education company and I’m very impressed. They included a metal point to put in the chuck to meet the live center. It’s off by like… maybe a sheet of paper and I think that’s the point sitting in the 3 jaw chuck a little crooked, but we’re splitting hairs, almost literally. Worth it!
cdbm1967
August 9, 2025
I believe this is an excellent intro into the world of lathe. It is small (less than 12 inches so you will not be able to turn long objects with a tail stock present. Also, they will not be big in diameter but what this lathe does, it teaches you basics. Do not expect using this lathe to do precise work. It is meant mostly to introduce you to turning while not spending an arm and leg. However, I am sure that once you get a bug (taste of it), you will upgrade to a bigger, more precise lathes very quickly.I would give it 5 if the motor did not quit on me after only 5 times of use. The machine has not been abused, used lightly as to not exert anything, mostly with wood so I am surprised.I contacted the seller to see what they will say. I hope it is not meant for a few uses only. That would be a shame.
Robert N peifer
August 6, 2025
Had a little project that needed a lathe to do the job and while it was very slow with this lathe it was able to get it done but don't think you will be turning anything harder than aluminum or brass but lots of things you can make with this little guy with a little Imagination and some Patience it can be a handy and fun little tool for model building to crafts as long as you keep it small
Keith Jolin
July 1, 2025
Not sure it will do the simple jobs I expected to do.
jean robert bourgeois
April 27, 2025
Bien que achete neuf, celui que j'ai reçue était d' usage, probablementjuste teste de la limaille aluminium sur toute les surface, aucun outilsde quelque sorte dans la boîte, alors le lot d'accessoires. j'ignore ce qu'il estsuppose se compose…il n'y a pas de liste ou instruction nulle part.d'un autre côté, la personne qui la essayé semblait savoir quoi faireil est arrivé parfaitement ajusté…bien qu'il manque les clés pour le chuckprobablement une ou deux allen key, les vis et support pour fixer la baseet finalement j'imagine un tourne vis….alor cinq minutes après l'avoir sortie de la boites, jai a partir d'une vieillenoix de bronze maritime, fait un pendule de radiesthésie à la professeurtournesol dans tintin…,alors trois constat, bien ajusté cela fonctionnetrès bien, bien que le tout semble à la limite du manque de puissance.alimentation ou moteurs, et malgré l'expertise certaines de celuiqui la préalablement assemblé….et ajusté, je me demande justementsi justement on peut travailler plusieurs pièces avant d'avoir tout réajusté..la nettoie et remballe comme cadeaux pour noël…. j'imagine je vaisle ressortir une fois ou deux avant les fête, la il fonctionne tout de mêmetrès bien pour un premier essai.
Audri
December 26, 2024
First impression was quite promissing as parts are neetly made of metal, even end caps seem to be metal, so was expecting decent lathe, however exitement ended here. 3 Jaw Chuck seems to bepoorly centered making lathe unusable. Live center shaft is loose and wobbly as well and lining axis of motor assembly and tailstock is quite tricky and tidious aswell. All in all it's rather disappointing as this contraption seems to be way less than the sum of all parts even netly made ones. :(
Recommended Products
$119.99
$ 52 .99 $52.99
$1,459.00
$ 99 .00 $99.00