Shopping Cart

Your cart is empty.

Your cart is empty.

ZIPLEVEL PRO-2000 High Precision Altimeter with Unipod, Protective Boot, Anchoring Stakes, and User Guide

4.8 (9) Write Review
Free shipping on orders over $29.99

$975.00

$ 99 .00 $99.00

In Stock

About this item

  • Replaces rotary lasers for faster, easier and more precise measurements and true one-person operation that allows setup/pack up in seconds .
  • Read level and elevations directly in digits without math, line-of-sight, distance error or factory calibration for up to a year on one 9V battery.
  • Setup ranges of 40 feet vertically (4 feet in HP) and 200 foot circle and unlimited differential leveling without math using built-in carry function.
  • Typical level precision (internal): 0.050 Inch (0.005 Inch HP); typical vertical accuracy (internal): 0.050 Inch (0.005 in HP) or 0.15% reading
  • 16 Powerful built-in functions plus SmartLink port and 6 different measurement scales including fractional inches, decimal inches, engineer's feet, builder's feet inches, centimeters, and meters.
  • Pressurized Altimeter for bubble-free paper-thin precision.
  • Includes unipod, protective boot, anchoring stakes, and user guide.


Product Description

ZIPLEVEL PRO-2000

ZIPLEVEL PRO-2000 High Precision Altimeter

Now, you can unpack in two seconds, and truly work alone with paper-thin precision over unlimited ranges without line-of-sight, distance error, factory calibration or math and pack up case free in under five seconds. After a quarter century with tens of thousands sold globally, ZIPLEVEL remains the world's only rugged, anti-bubble pressurized High Precision Altimeter with decades of service life.

ziplevel

ZIPLEVEL PRO-2000: A Powerful Construction Tool

  • Jobsite Rugged Bubble-Free High Precision Altimeter
  • One True-Man Operation
  • No line-of-sight & Factory Calibration
  • Paper-thin Precision with Unlimited Ranges

The Revolutionary ZIPLEVEL PRO-2000 Replaces Rotary Lasers as the World's Fastest, Easiest Bubble-Free Level

Unlike a rotary laser, ZIPLEVEL lets you truly work alone to quickly and easily level and read elevations directly in unmistakably clear digits. NO MORE rods, tripods, sensors, line-of-sight, error with distance, factory calibration and tedious computations. Now you can measure over any distance or elevation on earth, from paper thickness to the height of a mountain without error-inducing tabulation and math. ZIPLEVEL is the World's only bubble-free altimeter pressurized to prevent continual error-inducing bubble formation during storage, stepping on or kinking the Cord. Decades proven by tens of thousands worldwide who depend on ZIPLEVEL as the "tape rule" of elevation measurement. Fast, powerful, proven, rugged, reliable, affordable and made in the U.S.A. Cut costs, boost profits and join the measurement revolution. Whether you're supplementing or replacing a laser, you can't afford to be without ZIPLEVEL.


ZIPLEVEL SmartLink with ZIPLOT (Pat. Pending)
Optional ZIPLEVEL BlueTooth SmartLink with ZIPLOT (Pat. Pending)

The ZIPLEVEL SmartLink with a new Low Energy BlueTooth adapter and revolutionary ZIPLOT (Patent Pending) is a powerful tool that lets you mate ZIPLEVEL with an Android device to create and share instant profiles, 3D maps, and our patent-pending ZIPLOT allowing photographic survey data for instant estimates and project documentation.

  • Plots elevations directly at known locations on a photograph, satellite map, floor plans, etc.
  • Create & Share Instant Profiles
  • Low Energy BlueTooth adapter

KEY TO ITS POWER

  • TRUE ONE-PERN OPERATION
  • “SEES” AROUND OR OVER VISUAL OBSTRUCTIONS
  • DISPLAYS ELEVATIONS DIRECTLY TO:

0.1”, 1/8”, 0.01’, or 2mm;

0.01”, 0.001’, or 0.2mm IN HIGH PRECISION (HP) RANGE

  • MEASURES OVER ANY ELEVATION OR DISTANCE ON EARTH WITHOUT CALCULATIONS
  • BUILT JOB-SITE RUGGED & NEVER NEEDS FACTORY CALIBRATION
  • 16 POWERFUL BUILT-IN FUNCTIONS & OPTIONAL BLUETOOTH SMARTLINK FOR CREATING PLANS & PROPOSALS WITH IMPRESSIVE ILLUSTRATIONS
  • HIGH PRECISION – Allows paper-thin measurements to 0.005” (0.1mm) in HP range.
  • SCALE – For readings in fractional or decimal inches, feet or meters.
  • MARK – Lets you sound leveling or limit tones to supplement the display.
  • ELEVATION – For setting readings in sea level elevation at a known survey monument.
  • CARRY – allows unlimited vertical and horizontal ranges without tabulation or math.
  • ZERO – Sets display to read zero at a reference – the same as setting the target on a rod.
  • CAL – Calibrates accuracy of vertical readings – like calibrating a rod.
  • RECORD – predicts graded elevation without tabulation or math. (RECORD DATA - Stores up to 137 readings for later recall).

Product Specifications

Set-up Vertical Range 40’ (12m) / 20’ (6m) above & below Base Unit | 4’ (1.2m) / ~2’ (~0.6m) above & below Base Unit in High Precision (HP) Range
Set-up Horizontal Range 200’/60m circle (100’ cord) PRO-2000; 150’/50m circle (75’ cord) PRO-2000B
Resolution (Precision) No Limit
Resolution (Precision) Reads to 0.1”, 1/8”, 0.01’, 2mm; 0.01”, 0.001’, 0.2mm in HP Range | Internal Precision is 0.05”; 0.005” in HP Range
Scales Inches, feet, meters and centimeters
Carry Function Ranges No Limit
Range of “ZERO” or “MARK” Full vertical range
Repeatability 0.1”, 1/8”, 0.01’, 2mm; 0.01”, 0.001’, 0.2mm in HP Range
Typical Isothermal Accuracy Greater of 0.1” (2mm) or 0.2% reading; 0.35% of reading for measurements >10’ (3m) | Greater of 0.01” (0.2mm) or 0.2% reading in HP Range; 0.35% of reading >10’ (3m)
Temperature Range -22°F to +158°F (-30°C to +70°C) Operating | -40°F to +158°F (-40°C to +70°C) Storage
Drop Resistance Measurement Module: 5 feet (1.5m) onto concrete | Base Unit: 3 feet (1m) onto concrete
Water Resistance Rain tight; not immersible. Spray lightly to clean.
9V Alkaline Battery Life 1 year of typical daily use | Auto shut-off after 4 minutes
Memory Settings and 137 readings store indefinitely with or without battery
Unipod Length 15” (38.1cm) collapsed to a calibrated 48” (121.9cm) extended
Weight Measurement Module: 1lb. (0.45kg) | Total Weight: 12 lbs. (5.50kg) PRO-2000; 8 lbs. (3.65kg) PRO-2000B

dave
2025-08-12 12:24:36
Added this to my home inspection tool box and love its accuracy. Came quickly and only 2 months old, have to re-pressurize the cable in 2 to 3 years. Arrived in great condition and works perfectly. Easy operate and very impressive tool.
Roscoe p. Coletrain
2025-07-12 20:39:21
This tool is incredible. The set up time is 15 seconds The ease of use is unbelievably simple The accuracy is second to none One person usage it couldn’t be easier and clearerAbsolutely incredible tool that saves time and is super accurate and it doesn’t cost more than your expensive lasers either
AVon
2025-07-10 12:40:27
Fantastic tool for construction firms l we have lasers, optical tools, water levels, and old fashioned levels in a variety of shapes and sizes. This is so accurate and easy to operate that we have found unlimited uses. We will be shooting forms pre pour, floors post pour and pre delivery. Have a ridge board that runs 20 feet use the unipod adaptor and take your top reading from below standing firmly on the joists. Dead on accuracy without fish to the superintendents.
Vanatici
2025-07-06 14:59:14
As an inspector this is a must have for foundation leveling. It's extremely easy to use and robust. I've had it for two weeks and have been told multiple times that this one tool earned the entire cost of the inspection.
Blunz
2025-06-05 11:26:28
Good tool, but make sure it is used correctly or you'll get erroneous readings.
C. Kangas
2025-04-21 20:58:34
I love this zip level. It is amazing for my landscaping business and for the hardscaping jobs that we do. Just finished a huge 2 level patio and it turned out amazing and the slop was almost perfect with our base. Made putting down our bedding sand really easy.This thing is simple to use and can be used by one person with NO problem. I don't think I'll ever go back to a laser level.
Home-Sight
2025-04-16 19:00:02
Technidea has changed the playing field for Home Inspectors and Surveyors alike. The use of altimeter technology far surpasses the rod and stick and the black magic that surrounded previous methods of level determination. While a bit pricey, the instrument is well worth the investment and is impressive right out of the box with one finger operation that makes me look smart and builds confidence in clients who witness the technology in action. Whut! Thanks be to goodness (and God) for delivering this product to my doorstep!
Rob Kornegay
2025-01-09 10:56:14
I don't use it a ton, but it's very impressive. I use it for building decks and also doing things like patio pavers. However, my favorite thing to do is break it out during an estimate so the customer can see it. They've usually never seen one, and they are usually very impressed with the technology - which leads to better sales!
Chris Draaistra
2024-12-24 12:12:10
My team loves this level. Easy to train on, easy to use and seems very durable. Much easier and just as accurate compared to a laser level