Your cart is empty.
Your cart is empty. DUROCK Smokey Plate Mount Stabilizer Compatible with Cherry MX Plate Stabilizers. (Smokey Plate Stabs 80% Kit)
- Designed for MX-compatible Keyboard Plates.
- Translucent Smokey Housing and Stem/Slider, Gold-Plated Wires.
- The outer casing and parts, specifically made to reduce stripping of the threads.
- The insert is NOT pre-clipped, but the stem bottom design is flat which is not necessary to clip.
- Gold-plated wire is made of alloy material with real gold coating, it has higher hardness and oxidation resistance.
Package included:
4 x 2u Stabilizers
1 x 6.25u Stabilizers
1 x 7u Wire
Count D'Zvir
2025-08-14 18:51:45
I use them with a GMMK1 TKL and Glorious grease in the joints, slightly hand-clipped (cut one of the plastic "whiskers" with a nail trimmer, basically) -- and the action is great, there's no rattle, very little sound. Gold-plated bars looks sexy ;) Easy to install and service, they feel sturdy -- made with good plastic. A bit expensive, but it's a niche product and works well. Comes in a little cardboard box with the brand name "DUROCK" printed on it in bold letters. Seems legit.The stock stabs of the GMMK1 were not bad, by the way, so test the ones on your board first, lube them and clip them, if needed -- don't just follow what some Redditors have to say and buy replacement stabs along with your new keyboard right away. Though I absolutely don't regret changing mine -- it was a fun project! And on a different board... I might do it again, muahaha!
Mr. Apeman
2025-07-23 14:14:32
I'm new to the hobby of collecting mechanical keyboards and prefer hot-swappable, full size options, of which there are few. One of my purchases was a new GMMK full size. The stabilizers are adequate, maybe a little rattly, but definitely nothing that drew my attention during daily use.I had an opportunity to add a used GMMK full-size prebuilt to my collection. It had standard Gateron Brown switches. It came at a significant cost savings, being used. However, it was my first used keyboard. I didn't realize what problems may arise from regular use, as I'm fairly gentle with my technology and don't abuse or use tech forcefully. The used GMMK had significant rattling in the spacebar and stabilizer keys. It was distracting. Finger contact with the key would cause a distracting rattle. All my other keyboards were new and didn't have this type of problem.I researched modifying v. replacement of keyboards. There are a lot of inexpensive stabilizer mods but my experimentation was not providing solid results. Many mods require stuffing materials between parts to tighten tolerances and provide barriers to direct contact. It required a lot of fine-motor detail work but not good results for me. I opted for full replacement, as the kits weren't terribly expensive.The stabilizers aren't difficult to assemble and it was helpful comparing to the old stabilizers to get parts in correctly. Once they were assembled and on the board, these stabilizers were better than those on any of my other keyboards. I eventually removed the stabilizers from another GMMK with my Zealios 65gs (personal fave) and replaced that for "daily driving". Needless to say, the product worked ideally, as it quickly graduated into my favorite setup.
Gabe P
2025-06-29 12:13:34
The media could not be loaded.
Trips
2025-06-19 17:48:25
The media could not be loaded.
Rzr
2025-06-02 15:22:36
I got these for the Drop Alt. Really really good quality, and fitted the plate completely with no gaps whatsoever even without any modding. Still needed to clip the bottom, do the holee mod and lubricate the stems to reduce the rattle, but after tinkering around a bit, the keyboard now sounds perfect. So would recommend.
Faith
2025-05-02 14:28:30
I guess some people got bad batches, or their got damaged during shipping or something completely out of the ordinary, because mine were perfectly fine. All ten washers, all ten housings and stems, four 2U wires, and the 6.25U/7U wires. No clones or anything. Exactly the same Durock packaging I got on some Daybreak switches about a month ago.Wires weren't bent or anything; they rolled perfectly flat on my desk.Threw them into a GMMK Pro and the spacebar doesn't have any rattle now.So yeah. I guess the rest of these reviews got extremely unlucky, or I got extremely lucky. Take my review with a grain of salt, maybe ordering from here is a bit of a coin flip, but for the record, mine were fine.
Vincent
2025-04-30 15:18:51
It works and sound amazing, so much better than gmmk stabs. The housing were very tight with my gmmk 2 96, I still managed to push it through without having to file it. I regretted that I bought the gmmk stabs.
Arthur Defries
2025-03-05 15:45:25
They arrived really quick and are genuine durock stabs, i mean thats basically all there is to say, if you lube them with some krytox correctly you’ll have 0 stab rattle
P
2025-01-22 12:28:46
only comes with the 6.25u wire, durocks should come with both 6.25u and 7u wire. Buy from dailyclack or switchkeys instead in AU comes complete and $10 cheaper.
Recommended Products
