Your cart is empty.
Your cart is empty.We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Just The Facts
2025-08-12 14:50:05
This is the perfect fitting for my application. The course thread fit the existing threads and the finer threads were great for a stronger nut.
Customer
2025-07-05 11:49:13
worked great
mark
2025-06-27 14:06:46
Good quality. Perfect fit.
JR
2025-05-27 16:05:51
It worked as it should.
Good boot
2025-04-29 12:43:30
Works as advertised
Potato Pig (Veleda Taylor)
2025-03-27 10:24:28
Perfect fit for 1963 Polyhead 318 exhaust manifold.
Jeffrey J Lowry
2025-03-06 13:38:42
Tried to use these as a replacement for some ARP studs that wouldnt be available for a couple weeks trying to help someone out. While carefully assembling and using a torque wrench to evenly tighten down all the studs in a star pattern like your supposed to they all stripped around 20 to 30 ft lbs of torque while it called for 35 ft lbs on that size hardware. They should EASILY be able to get over torqued to 50 or 60 ft lbs without stripping the threads. I had to use a combination of heat, drilling, extractors etc to get them all out after the nuts pulled the threads off the studs. no threads were damaged on the hardware store nuts, it was all the studs so they were obviously a MUCH poorer material. I used one of the original studs and was able to torque it to 75 ft lbs and the threads on it never deformed.Had to wait another 2 weeks and costs me a couple thousand in lost time using this garbage. Unless your hanging feathers from them be forewarned
Cristian Rivas
2024-12-16 15:18:02
Carburator stud did a amazing job and I was able to add a spacer!
Recommended Products
