Your cart is empty.
Your cart is empty. Each Mold has 4 cavities
1-1 oz
1-2 oz
1-5 oz & 1-10 oz
Sizes are as follows;
1 oz Cavity is 9/16" X 1-1/16" X 1/4" Deep
2 oz Cavity is 21/32" X 1-1/4" X 5/16" Deep
5 oz Cavity is 7/8" X 1-11/16" X 3/8" Deep
10 oz Cavity is 1-3/32" X 2-3/32" X 1/2" Deep
Machined graphite mold with the slight wall taper for better metal removal. This Mold is great for making several bars at the same time. The weight of each bar depends on what metal your working with and how full you fill each cavity. Full to the top will give you a apx weight that size Gold Bar in each of all 4 cavities. Silver is not as heavy as Gold and pours about 1/2 the weight in each cavity when poured to the top. Note; The dime in the pic is just for reference, not included with the mold.
Customer
2025-07-31 15:08:39
Sizes are true and it's easy to use. Meets my expectations.
Doug
2025-07-22 12:04:33
The mold is nice and thick. Very well carved. I have had no trouble with pouring and emptying the mold with gold or silver. I have no trouble with any dirt sticking, so it leaves a nice pure ingot. The machining is nice and bars look good.
CN
2025-06-28 16:51:08
I poured 10 oz. in the 10oz. bar tray and it overflowed by almost double. So the sizing is off.
HalfTechnical
2024-12-30 14:51:59
Cavities are incorrectly sized for their stated volume.
Kevin Simmons
2024-11-27 17:41:43
Was a little smaller than was hoping for but is still as agreed.
Recommended Products
$24.95
$ 11 .99 $11.99