Your cart is empty.
Your cart is empty. ★ About Product
***Item type--Beer Filter Screen ***Material--304 Stainless Steel ***Color--Silver ***Thread--1/2" NPT ***Mesh--16 mesh x 0.45mm ***Size--6inch, 12inch
★ Description:
1-The screen suit for most homebrew ball valve,perfect for all-grain brewing or straining out leaf hops after your boil , replace false bottom to separate wort from the grain effectively ,also use this as a screen in cooler mash tun.
2-The screen and the fitting both made of high-level food grade 304 stainless steel, which is durable,healthy for people body.It also has good corrosion resistance and heat resistance performance, can be used many times with a long service life.
3-There are two sizes for you to choose freely, and equipped with a connector, you do not need to re-purchase, easy and fast installation.
★ Attention:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2. Please allow little measuring deviation due to manual measurement.
★ Package Include:
12" bazooka screen with 1 pcs fitting.If you are not fully satisfied with our product, we will serve you whole heartedly.
Rick
2025-08-08 18:53:46
I use these at the bottom of my fermentation buckets, I have to cut them down a couple inches but that is fine - tin snips to cut and a bench vise to pinch/bend over the end is easy to do. Very little sediment comes thru.
William Behnke
2025-05-25 16:39:51
Well built and efficient strainer to keep grain out of beer wort. I installed mine in a chest cooler connecting to a bulkhead and valve. Very satisfied with the results.
norwalkin
2025-05-18 10:14:52
Clean welds straight screen.
BB
2025-05-11 20:36:34
Nice screen and worked as expected. Saves time during cleanup while draining liquids. Install and screen cleaning itself are a breeze.
JP, Sr.
2025-05-02 16:28:54
Considerably well built for the price range however cut my finger up scrubbing the pot without taking it out first not realizing it had teeth.
William E.
2025-04-10 16:17:01
I use the boil kettle as the first fermentation vessel. I was concerned this would clog when transferring to the secondary. Not only is that not the case but I'm pretty certain less settlings are being transferred. Pleased with the purchase.
Silly
2025-03-09 14:01:49
These filters are great for straining off the liquid from grain mashes. A must have.
Skywalker Jedi1
2025-01-12 15:09:50
I have 2 mash tuns and 2 false bottoms and took out the false bottoms and installed these. Works great and much easier to clean ! You don't have to worry about grain and hop debris stuck under a false bottom.
Darren
2025-01-05 14:06:27
Good quality product
Recommended Products
