Your cart is empty.
Your cart is empty. "This pre-wired LED is Super small with resin cover to protect, with 10cm wired,Super strong LEDs and wire,
The wire is bendable, it easy to fix any shape as you like
You can connect with any 3V battery directly
All LEDs work in 3-3.3 Vdc
Do not need add any resistor, it can work with normal 3V battery
If you want the LEDs work in other voltage,we provide below resistors in the package too
(Pleas send the Package included to get the details)
Applications & Installations:
Suitable used in any small model, cosplay, small model building,
Very low power consumption, and high luminous intensity
Package included :
26pcs pre-wired SMD red LED(pre-soldered) with 10cm wire length
26pcs pre-wired SMD blue LED(pre-soldered) with 10cm wire length
26pcs pre-wired SMD green LED(pre-soldered) with 10cm wire length
26pcs pre-wired SMD yellow LED(pre-soldered) with 10cm wire length
26pcs pre-wired SMD white LED(pre-soldered) with 10cm wire length
130pcs resistors (not pre-soldered) for 3.5~5V used
130pcs resistors (not pre-soldered) for 5~12V used
130pcs resistors (not pre-soldered) for 9~14V used Total: 130pcs LEDs + 390(pcs)3 types resistor
Please type & search"bowerful for more LED
Mac
2025-08-30 17:10:25
I bought this for model lighting and what a pleasant surprise. They are almost microscopic but provide a lot of light for the size. Only requires about a 1mm hole. The positive lead has insulating varnish. There are separate sets of resistors included for a wide range of voltages (3V to 16V). They are a warm color temperature (estimate 2800K-3000K). I use a 12VDC bus for lighting.Solder the resistor for your voltage, drill a small hole, add a little PVA to hold in place and done. Thank you, seller.
jonathan
2025-08-07 12:10:53
way more than i needed or will ever have any use for again, but wired 7 of these onto an old 12v 500ma wall wart and they work great. not very bright, but then i did get the UV variant. said UV light is mostly in the high UV range, but works. dropped them inside of a resin mold, and now i have a glow in the dark castle with UV lights inside that charge the glowing very well. tried the various resistors with different voltages and they all seem to produce about the same level of brightness, while protecting the LED's, so they picked the right values, more or less.
Chris B.
2025-07-24 13:03:32
I've used a few of these for the inside of some model ships I've built. They fit easily into just about anywhere, and it's very easy to wire them up to nearly any voltage with the included resistors! For how tiny they are, the output is very impressive! I've also bought the red and blue versions of this for some other projects I've got coming up soon. Highly recommend for anyone needing small lights for small places!
Repeatauto
2025-07-12 13:50:18
The lights work well and produce a bright warm clean light. They used a stiff wire that interfers with mounting in tight spaces. Like HO scale headlight housings. I was able to use them in number boards more easily and they will and do work well in hidden spaces. The 0603 light head is too big with the wires attached. They are also mounted in a small drop of resin which may make them waterproof and better suited for lighting drones. They various colors are well suited for signal heads. I won't be purchasing the white lights again due to room constraints but not do to any other issue. They seem to be good qualityIn
Janice Bowyer
2025-07-02 18:13:42
These lights are perfect for my miniature scenes. So easy to power up and light up my little rooms.
Ray O
2025-06-07 14:57:32
I required some very small, bright (white) LEDs for an locomotive project I was involved with recently. These LEDs definitely did the trick. The connecting wires are a very fine gauge motor wire and should be handled carefully. I 'strip' off the insulation by burning it with my soldering iron (said insulation is a lacquer coating). These lights can be very bright. I usually couple them with a 1K ohm resistor (greater resistance = dimmer light levels). I'll probably not use all 25 pieces in my lifetime...but these are well worth having around.
RoBear
2025-04-05 15:51:16
2010 Toyota Sienna overhead console buttons bulbs were burned out. I replaced them with these soft white LED's and inserted the supplied resistor in line with the power connector and they worked perfectly and perfect brightness and even dim correctly when dimming the dash lights - matched stock bulbs perfectly! Should never need changing again either!
Alfredo Martinez
2025-02-17 13:38:58
Funcionan muy bien e iluminan bastante bien con solo 3v ( tipo de baterÃa CR2032)
Recommended Products
