Your cart is empty.
Your cart is empty.Product Description
Washer pump 137221600 includes a firmly attached red flapper, it can Prevents drain backflow. 137221600 134051200 Washer Drain Pump can fix the following problems: water leaking from the bottom of the washing machine, the drum does not drain, or abnormal noise occurs during use
Easy Installation: Disassemble the defective drain pump from impeller/filter/machine shaft, install at the same place the new Drain pump motor with also new gasket
PACKAGE INCLUDES 1 x 137221600 Front Load Drain Pump,1 x mounting base and 1 x screw, the product specs of this washer drain pump are: Frequency: 60Hz, Watts: 85W and Voltage: 110V-127V. Replaces part numbers: 137108100, AP5684706, 137151800, 131724000, 134051200, 134740500, 137108100, 2754548, ER137108100, PS7783938, TJ137108100,etc
Disconnect the power before installing this part. Wear work gloves to protect your hands.You’ll just need a Phillips screwdriver, pliers, towel, needle nose pliers, and small flathead screwdriver. Washer pump 137221600 is easy to install. Take care after removing the pump, be sure to clean the rubber boots and make sure the hose is secured to the drain
137221600 Washer Drain Pump removes water from the washer during the drain portion of the cycle. 137221600 features a durable heavy-duty ABS plastic construction to ensure compatibility and long-lasting performance. If your washer will not drain you made to replace the 137221600 Washer Water Drain Pump
Steven C.
August 16, 2025
Saved me from more hassle and expense. Not a super easy install, but there are tutorials online for a lot of washer models and I was able to follow those with basic tools and complete the replacement. Washer drains once again.
ron h
August 11, 2025
Fit like original works great
Customer
August 4, 2025
Everything was as it should be the only issue was probably during shipping. Where the little (red) rubber flap was it was broken off. I just superglue it and used the pump and it works as it should.
David Barnes
April 5, 2025
Much cheaper than OEM and works perfectly
Robert N.
April 3, 2025
Luckily, the front loading washer I have has a lower front opening. Remove two screws and then remove the cover and the water pump is right there near the front and on the right. I had to take this pump and adjust it from right to left but that was super easy. The new mount wouldn't fit the existing screw holes but this pump fit perfectly to the existing mount. Replaced the inlet and the outlet hose, connected the power and it worked. Nice an quiet too compared to the growler I just removed. We'll see how long this lasts but for the price AND 2 day shipping, well worth it!
Matthew Choiniere
February 23, 2025
fits perfect, but harder install than orginal
Aaron Valdez
January 22, 2025
Came in on time and was able to get delivery in one day. The other pump offered here in Amazon would have taken an additional day. So always check to see if a different manufacturer can deliver sooner. Took me ten minutes to put the new one in and I’ve run two loads with great success so far.
KM
December 27, 2024
Easy install. Perfect replacement. But didn't even last 1 year. Less than 400 washes....
Recommended Products