Shopping Cart

Your cart is empty.

Your cart is empty.

14PCS Front Control Arms w/Ball Joints, Tie Rod Ends Sway Bar End Link | Suspension Kit for Chrysler 300 Dodge Challenger Charger Magnum 2005-2010 2WD RWD ,Replaces K620177 K620178 K620258

Free shipping on orders over $29.99

$156.00

$ 75 .99 $75.99

In Stock

About this item

  • Fitment:for Chrysler 300 2005 - 2010 (RWD Models); for Dodge Magnum 2006-2008 (R/T, SE, SXT; RWD Models), for Dodge Challenger 2008-2010, for Dodge Charger 2006-2010, for Dodge Magnum 2005 (RWD Models)
  • Package Content:2 x Front Upper Control Arm w/ Ball Joint, 2 x Lower Control Arm w/ Ball Joint, 2 x Front Lower Control Arms, 2 x Inner Tie Rod Ends, 2 x Lower Ball Joints, 2 x Outer Tie Rod Ends, 2 x Sway Bar End Link
  • Replace for Part Number:K620177,K620178,K620258,K620257,RK640664,EV80702, ES3571, K80823, K80822,K7469
  • Advantage:The superior Iron Body Buffer Vehicle’s Vibration And Lower Noise Well ,Improve Your Vehicle Performance, Optimize Driving Fun, And Provide You With Better Guarantee
  • Service:We Promise to provide you with better Guarantee.Usually 12-months Unlimited-mileage Quality Guarantee. We Try To Provide High Quality Products and Best Service to Our Customers. If Any Problem Please Feel Free to Contact Us .We Will Give You a Satisfactory Solution!



Product Description

E46 control arm

Package Content

1 X Front Upper Left Control Arm w/ Pre-Assembled Ball Joint - K620177

1 X Front Upper Right Control Arm w/ Pre-Assembled Ball Joint - K620178

1 X Front Lower Left Control Arm w/ Pre-Assembled Ball Joint (Forward Position) - K620258

1 X Front Lower Right Control Arm w/ Pre-Assembled Ball Joint (Forward Position) - K620257

2 X Front Lower Control Arms (Rearward Facing Position) -K640664

2 X Front Inner Tie Rod Ends - EV80702

2 X Front Lower Ball Joints [Non-Adjustable Ball Joint ] - K7469

2 X Front Outer Tie Rod Ends - ES3571

1 X Front Left Sway Bar End Link - K80823

1 X Front Right Sway Bar End Link - K80822

control arm

Sutiable Vehicles

  • for Chrysler 300 2005-2010 (RWD Models; Non-Adjustable Ball Joints)
  • for Dodge Challenger 2008-2010 (RWD Models; Non-Adjustable Ball Joints)
  • for Dodge Charger 2006-2010 (RWD Models; Non-Adjustable Ball Joints)
  • for Dodge Magnum 2005 (RWD Models; Non-Adjustable Ball Joints)
  • for Dodge Magnum 2006-2008 (R/T, SE, SXT; RWD Models; Non-Adjustable Ball Joints)
control arm
control arm

Justin Brown
August 7, 2025
Everything fit perfectly and now my car rides better than ever before. Had 1 locknut that was the wrong thread pattern but not an issue.
Straight Talker
January 26, 2025
We are doing an engine rebuild on the '06 Dodge Charger R/T Daytona. This is the perfect time to go ahead and replace all the front suspension as well. We also have new struts and springs to finish off the job.This kit has the control arms. That is where my squeek was coming from. All the ball joints and tie rods are in here, too!
Tina moore
January 4, 2025
One of my parts came in damaged.
Devin
December 29, 2024
This set contains many of the replacement suspension parts (other than shocks/struts) needed for a car this age. If hiring an installer, just make sure they don't require you to use their provided parts for warranty reasons. Otherwise I’d say that if you're comfortable doing brake work and have the tools, you could install these at home like we did. I usually set aside a weekend where the car can be up on jackstands, watch a refresher video or two first, and keep instructions and torque specs available to refer back to when I have questions.I'd ordered half of these types of parts for my daily driver from several different sources and installed them in the driveway the same way as these. While I know it doesn't matter that those parts are different compositions, it bothers me that they'll probably age differently and need replaced at different times. These are all nice solid matching parts that don't look much different from what's at the dealership or parts houses. It's not a quick and easy job, but you should definitely notice a change in ride quality afterwards (even if you'd already replaced the shocks/struts a few months ago hoping that would be adequate.)
T. Glunz
December 24, 2024
This is basically a complete front suspension rebuild kit for the older Charger/Magnum/300/Challenger cars 05 to 10.My 06 Charger RT has about 98k on it now so I probably wont need to replace anything in the front end for a while but this has it all for a reasonable price and the parts appear very well made.There's a LOT of goodies in the box so I just grabbed a few pics in the box and some selected parts in the plastic so I can box it back up till I need it.I'll update when I actually install some or all of the parts in the kit.
Lyze
November 27, 2024
This is a great replacement set all the parts fit well and installation was very strait forward. My car rode a lot better after and this set was installed. If your looking for a quality part that’s a great value this is the set for you
Recommended Products