Your cart is empty.
Your cart is empty.Product Description
Amliber is an automotive tool line brand dedicated to providing innovative and quality products. Over the years, we have been focusing on automotive products and components. Continuous improvement and innovation are our eternal goals.
We have a range of automotive tools designed to help people get things done in a short amount of time, making people's lives easier and more comfortable
What You Get
DT connectors offer field-proven reliability and rugged quality.
- 2 Pin DT Connector
- 3 Pin DT Connector
- 4 Pin DT Connector
- 6 Pin DT Connector
- 8 Pin DT Connector
- 12 Pin DT Connector
- pin contacts 1060-16-0122
- socket contacts 1062-16-0122
- Wire Gauge: 14-20 AWG
- Current Rating: 13 Amps
- Operating Temperature: 14°F (-10°C) to +176°F (80°C)
DT Connector Housings
Made of PA66 nylon, which are IP68 waterproof, dustproof and corrosion resistant, with no loss of electronic mass or leakage after installation. Optional inline, flange or PCB mounting available.
Stamped-Formed Contacts
16 stamped contacts (pin contacts 1060-16-0122 / socket contacts 1062-16-0122) are very stable and conductive with a 13 amp capacity. Easy to crimp and suitable for 14-18AWG wire.
Secure Connection
The snap design ensures that the contact is accurately and completely inserted into the housing and prevents it from slipping out of the connector. It can also be easily removed when needed.
Scot
2025-09-07 13:57:02
Awesome kit. Worked great.
Collin MacGreggor
2025-08-04 12:10:29
Used this kit for wiring in new aftermarket (baja designs) lights to my Sierra 1500 pickup. Wiring does go straight to a switchpros system, but being able to make a sub harness for both lights that lead up the side of my truck and to the controller are weather protected as good as an OEM wiring harness would be. As a Toyota Dealership technician, wiring needs to be secure and waterproof. I've used this kit to wire in lights to customer vehicles' that have similar setups and they appreciate the fit and finish as well. These connectors have solid pin engagement when building a harness and the rubber seals fit nice and snug. If wiring is stiff, get some aerosol silicone spray at a hardware store as it will dry after installation making it easy and keeping the watertight seal that is needed. I've had my lights wired up using this kit for the past year and they still keep water out of my lights and my switchpros unit from having issues. Will definitely be ordering again as i use these for my various projects.
pat malato
2025-07-29 14:59:27
Conmectors on my SAND RAIL
Crew
2025-07-24 18:40:56
Exactly what I needed. Fit perfectly.
johnnystarship
2025-06-15 11:40:03
used this for a mast connection on a sailboat. great improvement to what the factory and instrument sends out with these boats.
G Naber
2025-05-05 17:47:34
Useless.I bought 2 sets for a project and wish I had never seen them. I fought with these for most of an afternoon, thinking I was doing something wrong. When assembled the male pin protrudes above the wedge lock only 0.95", not enough to engage with the female socket adequately when connected. Finally, I cut one in half to see what was going on and it was obvious there is no way that the male pin is EVER going to stick out far enough to work properly. Also, once the wedge is installed, it's over. There is no method to remove the wedge without completely destroying the whole connector.Save your money.
angela gallo
2025-02-23 18:09:09
It burns out the connector with the Alternator wire
Brendon
2025-01-27 16:38:17
I needed to change the connection end of a engine wire loom to match my new engines. This did the trick and now I have a heap of extra connectors for other projects.Really good value.If they are expected to be used in an outdoor or exposed environment I would recommend using a liberal amount of dielectric grease on the inside of the connectors (during construction/assembly).
Recommended Products