Your cart is empty.
Your cart is empty.The Ultimate Trailer Jack was designed for the ultimate in convenience, speed, and simplicity. Just pull the easy-to-access release pin to drop the entire jack tube down for quick adjustments. Even better, there is no longer any need for space fillers with this jack, so put away the drop leg, blocks, and bricks! With this jack, setting up your trailer at your destination has never been breezier. The jack features an outer tube that extends to provide extra lift. Pulling the release pin, and dropping the outer tube, gives you up to 12” of lift, ensuring a solid foundation with the ground. And then the easy grip topwind handle allows for an additional 15.5” of travel by cranking the jack. Keep setting your worries aside with the Ultimate Trailer Jack, because its compact profile keeps the jack flush with the trailer frame when its retracted. You no longer have to worry about catching your jack on uneven terrain while you tow. The Ultimate Trailer Jack is easy-to-use, quick, and dependable. If you’re looking to spend less time setting up your trailer and more time doing the things that make you happy, then the Ultimate Trailer Jack is for you. Features: - Quick release locking pin allows for faster operation - Interior roller bearings for product performance, easier cranking power and jack longevity - Lift capacity: 2,000 lbs - Support capacity: 3,000 lbs - Zinc coated for maximum corrosion resistance - 7 Height settings allow for fast, easy positioning - No blocks or drop leg needed - Lower the jack from the mounting bracket to get up to 12" of lift - Manually crank the jack to achieve up to an additional 15-1/2" of travel
Chad Bro
September 5, 2025
The Ultimate Trailer Jack is extremely versatile and easy to fit to a trailer. It provides smooth operation and adjusts effortlessly, making hitching and unhitching a breeze. Great value for the money. A must-have for anyone looking for a reliable and efficient trailer jack.
RZR Dad
September 3, 2025
This is by far the best trailer jack I have ever had. It’s very quick and easy to use. The shaft moves up and down very smoothly, makes jacking up the trailer significantly faster than the traditional crank only design.It’s construction is solid, very sturdy, excellent welds.Installation was quick and painless. 3 bolts and done. While the jack doesn’t come with mounting bolts, it shouldn’t. You are either to reuse your existing bolts from your old jack or use new holds with lock washers like I did.There are a lot of comments complaining about how hard it is to install the 3 bolts. I had absolutely no issues. I installed them finger right with ease and then about 3 turns of a wrench and they were tight. There is plenty of room. The only way this is hard for people is if they are using too long of a bolt or are trying to use a socket. Sockets don’t work. Use an open ended wrench. The bolts at the most need to be 1†long.It comes with a small jack foot which works well. I use a wheel foot as I need to be able to roll my trailer into its final parking spot.With the jack in most positions, you can open your trucks tail gate with plenty of clearance without hitting it.Overall, best trailer jack on the market, hands down.
Michael Cassidy
August 26, 2025
Exactly what I needed! The factory jack and it's mounting height left the foot hanging to low and it would drag hard on occasion with dips at intersections and lot entrances. I tried finding a spacer to raise the mounting height and happened on this jack. It's perfect, it allows me to raise the jack so the foot is almost flush to the bottom of the tongue for travel and drop it to the perfect height with no blocks no matter where I park to have minimal cranking to unhook. Very solid unit.
Christopher Dembrow
July 31, 2025
I recently destroyed my tongue jack hauling firewood with a dump trailer offroad. Something must have grabbed it on a bump and nearly tore it off. The replacement was either going to be a weld-on swivel or this. I chose this and I'm glad I did. It was simple to install, and I didn't have to get the welder out like my other option would have required. The jack is no longer the lowest point on the trailer when in the stowed position, and I don't need to crank as much to get it off the truck. I can put it anywhere I want to allow me to open my tailgate.My two concerns are slop in the adjusting mechanism, and the lack of hardware.The slop between the jack and mount is a bit jiggly. It's not any more jiggly than a swivel style, but it could be a little bit more snug and operate fine. Because of the slop, I would not recommend this for medium duty (5 ton+) trailers that can see lots of tongue weight. I could see this wearing out quickly on longer trailers. I think it's fine for my 5 ton dump trailer because the tongue is quite short and the trailer unladen naturally wants to support itself due to the suspension being close to center of gravity.For $90, $30-$50 more than other jacks, I think it's reasonable for the manufacturer to provide the appropriate hardware for the install. Hardware included would have saved me a couple bucks and time at the store, and wouldn't cost the manufacturer nearly as much as it would me. I think it would also be a better presentation of the jack as it would so much better as a product had the hardware been included.
C. Morgan
July 29, 2025
I’ve put one of these on both my trailers, sturdy and very functional. Been using for a couple years now. If it got destroyed i would purchase again
Don
June 24, 2025
I have a 3/4 ton truck and when I have my trailer on I cannot put my tailgate down because the trailer jack was in the way. This trailer jack makes it possible to lower the jack down so I can open my tailgate. I have read that people have had problems with aligning the holes up with the jack and the trailer mounting plate, I did not have this problem. The jack has a larger diameter collar on the top which is closer to the bolt holes but I used an open end wrench and it went on fine. The only thing negative I would say is when I drop the jack down and lock it in. I need a brick under it to get it high enough to come off the ball on my truck.
Steve H
May 25, 2025
Well functioning and reliable. Tolerances could be a little tighter but it's a jack not a piece of machinery. Great value for the price.
Jimbobway ain
May 9, 2025
I'm in and out of the bed of my truck more than I even want to be. I hated the fact that my jack was at the tongue of the trailer and I couldn't drop my tailgate without unhooking. With this one, you just drop the entire top down and there's a good bit of room to drop the tailgate. I CAN'T SPEAK FOR BUMPER MOUNTED TRAILERS I HAVE A RECEIVER HITCH. It also gives WAY more jack height to unhook easier. The only downside so far is the tiny foot that comes with it seems like it'll sink in soft ground. It does accept the wide based foot, so it's not a deal breaker. Kind of weird to figure out how to use it, but it's just as easy to use once you do learn to use it. It has a wider post than most, so mounting it in the factory bolt mounts was a bit annoying seeing I could hardly get a socket on and then had to 1/4 turn with a wrench/pliers to truly tighten it down.
Badadaboum
April 21, 2025
I had trouble finding a suitable jack for my A frame low profile plateforme. This one does the trick by retracting completely in its tube while hauling. Seems well made, hopefully the mechanism will last, but it’s zinc, so probably not. Buy it, the others didn’t work for me.
don villeneuve
April 17, 2025
Easy to use and fast no more wooden blocks. Install is quick and simple.
j1
March 16, 2025
The best part of this jack is it’s ability to fluctuate height. When towing it allows enough adjustment to pull the base right out of harms way. No more getting dragged on high spots in the rd. Your receiver will hit before the jack. It’s ease of adjustment makes it great for lifting on and off any vehicles hitch.
Rick
February 11, 2025
Liked how it gives me more clearance on the trailer, not hanging down so far. Dislike the poor workmanship on the crank handle, had to re-drill hole through handle and put a proper bolt in
Paul Kuszyk
February 9, 2025
My old trailer jack did not have enough ground clearance. When completely raised it hung a couple of inches below the trailer frame and that was not enough for certain driving conditions like loading onto a ferry or parking on a steep driveway. The Ultimate Trailer Jack solved all these problems for me. It was an easy install once I had removed the old jack and the rusted A-Frame bolts.
Recommended Products
