Your cart is empty.
Your cart is empty. ❤ Sopoby Heat Shrink Crimp Ring Connectors 5/16” Red 22-18 AWG
FEATURES:
● Tinned copper terminals are resistant to corrosion and work perfectly for any electrical application.
● Heat shrink tubing shrinks to 1/3 its original size, ensuring the tight and secure insulation for every connection.
● Heat activated adhesive creates impervious seal to salt water, oil, acids, and sunlight.
● Easily shrink the ring connector tubing with low heat without the risk of melting the wire Insulation.
● Ring terminals are color coded and contain text print to help you make sure you are using the right terminal in seconds.
● These eyelets can be used in a wide range of applications like automotive, marine, motorcycle, scientific, industrial and home wiring repairs.
USER GUIDE:
① Select the best match heat shrink crimp connector for your wire
② Gently Strip the wire to 1/3 inch
③ Insert stripped wire into the connector
④ Use the crimper tool to get the desired grip
⑤ Apply heat evenly until the tube shrinks and the adhesive flows
NOTE:
● Operating temperature: from -67℉ to 257℉ ( -55℃ to 125℃ )
● Minimum shrink temperature: 176℉ ( 80℃ )
● High Amperage Ratings: Red (22-18 AWG) Max 19 Amps
● To get the best result use heat/ hot air gun
● Do not set on high temperature at the beginning
PACKAGE:
● 200 PCS 5/16” Heat Shrink Crimp RING Connectors (Red: 22-18 AWG) with a translucent jar
FRIENDLY AFTER-SALE SERVICE & Guarantee:
❤ Sopoby guarantees all buyers 100% satisfaction, once you find any problem of the product, please feel free to contact us, we would try our best to assist you at the first time.
❤ 100% Satisfaction Guarantee for risk-free shopping!
George White
August 20, 2025
Good value for the money.
Truely
August 8, 2025
work well, I came back buy more
Jon A
August 1, 2025
quality product
Karl Jensen
April 2, 2025
First of all, mine are brass, not copper and appears (not sure) to have a flash nickel coating (shiny) rather than tinning(dull) thou it could be bright tin. The bad: brass is harder securely crimp, especially thru the heat shrink and most likely not without damaging the covering. If it’s nickel and not bright tin, it may more galvanicly reactive than you planned on. Nickel is greatly distant to copper and tin on the metals nobility chart. The good: it may also be less reactive too such as fasteners. . It’s less likely to be damaged by a washer or fastener. Less likely to break from bending( I compared). The bad: You may have to fold the wire over before you insert and have a quality crimper. If you can’t solidly fill the barrel with wire, it will pull out. I had to even modify Klein to get it to crimp smaller. Do rip out test! You may find you have to use the non-insulation crimp area.
Larry
March 2, 2025
Have gone through hundreds of these now with zero issues.
Sean R.
February 14, 2025
Very satisfied
Mary D.
January 15, 2025
Good value for crimp connections. I bought these to use on the ends of cell tap wires for the BMS on my homemade ev. They are made of a good material and have a decently nice heat shrink on them.
Russ Rowberry
January 8, 2025
These heat shrink connectors work extremely well. They hold spliced wires together stronger than the rest of the wire. They will not come apart or leak if they are crimped and heated correctly.
Recommended Products
