Your cart is empty.
Your cart is empty.Product Description
Cinderella 111
2025-09-04 15:12:13
The saying "measure three times and cut once" is what you have to do when assembling this very nice aquarium stand. I've looked a many stands for a 20 and 10 gallon that I plan to use as "overflow" aquariums. I've just finished assembly and don't have pics yet, but this stand feels solid and secure, though as an old lady who does stuff, I find the plastic wall toggles for tipping security a total joke! I also got lost on the written instructions, but have a laptop and set up the one video and followed it carefully. As one reviewer mentioned, they say to use the wrong screws for installing the main side pieces to the unit! Just think about the screws as you go along, and you'll notice that A and B are backward! The screws for the drawer handles were too long and since I couldn't find short ones that fit in my stash, I just shimmed them out with a couple of nuts. All things considered, it's a nice stand and for a reasonable price. In my opinion the plastic that is supplied for the top, to put under a tank, is probably a bad idea. Folks will be messy and not realize water is under the plastic! And, funny as it is even to me, the drawers are not interchangeable on my unit! But they fit perfectly one way! Good luck with this stand.
Katelyn
2025-07-30 11:12:09
My item arrived in very secure packaging. There was lots of styrofoam holding boards in place, which I really appreciate since shipping can be rough. After being put together, it seems to be great quality. It looks very appealing, and does its job well. Although, getting it put together was quite the task. The instructions were awful to follow, and a lot of steps did not even state what boards to use. A few pieces of wood were missing holes as well. Took a bit of time, but we eventually figured it out.
COREYDUSTINROBICHAUD
2025-05-21 10:54:02
So it definitely is not long enough to hold a 50 ya tank. You'd have to get 2 input. Come next to each other, but it holds the twenty gallon tank rather well.And luckily, I had another stand laying round for the other tank. Super high quality product, very durable side. Many, many screws to put together and hold it safely over the years. The built empower cord is a nice accessory. Two u s b's and three a c d c...Convenient option to run cabling systems and hide unnecessary hoses and cables. Fits nice and offers storage below. For another tank about the same size, maybe a little shorter.What's an average twenty gallon tank.
Mitch
2025-05-17 15:00:29
The instructions were very confusing and hard to follow. Some of the pieces did not fit properly - not able to use the drawers as the pieces did not actually fit together
jason r.
2025-05-08 16:08:39
Great quality, beauty white color, would have gave it a 5 star, but the instructions for building this was one of the worst I've used. Fix that and there should be no reason to get less stars.
Chelsea
2025-04-04 21:30:54
I was hesitant to buy since there were no reviews but this stand has a much higher weight capacity than similar stands so i went ahead and bought it. Its rated at 550lbs and i have a 350 lbs aquarium on it so i like the peace of mind having the extra wiggle room. Looks great
GivingOurTwoCents
2024-12-19 19:43:33
A solid and well built piece of furniture, but the assembly process was by far the most frustrating experience I’ve had with any furniture. While the pieces were numbered, the written instructions didn’t tell you which numbers to use for several steps. Many pieces look very similar, and the drawings alone weren’t enough to figure it out. I referred to the video on the product listing for guidance, but even that had errors and lacked clarity. Due to this I ended up using a screw that was too long, which put a noticeable hole through one of the wooden pieces. Double check your hardware lengths, don't assume they are labeled correctly. I also noticed that the screwdriver and screws shed metal flakes and ended up all over the floor. Pro tip: tape was helpful for cleaning it up.Assembly took more than 2.5 hours to put this together. Despite these issues, the finished product is excellent. It feels heavy-duty and very sturdy. I'm using it as a pet food/feeding station, but I do think it would absolutely be rugged enough to hold 550 lbs. And the built in power strip on the right side, which includes two USB ports and three standard plugs is handy for powering my pet's automatic food and water dispensers. Eliminating the need for a separate power strip.
Matthew Doyle
2024-12-06 11:13:18
I bought this stand after doing a lot of research and landing in it for the design, capacity and options. I was hesitant because it had no reviews but it is really well made. Quality SS hardware and solid structural frame. Great buy
Recommended Products